FCC ID VPYLB2AB
VPY-LB2AB, VPY LB2AB, VPYLB2AB
Murata Manufacturing Co., Ltd. UWB+BLE Combo Module LB2AB
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: VPYLB2AB is VPY. The remaining characters of the FCC ID, LB2AB, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
UWB+BLE Combo Module
- Application: UWB+BLE Combo Module
- Equipment Class: DTS - Digital Transmission System
- Short Link: fcc.id/VPYLB2AB
- Sources: FCC.gov | FCC.report
- Registered By: Murata Manufacturing Co., Ltd. - VPY (Japan)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2022-03-13 | yDPlJ/U6/mOHEmgYWocxFQ== |
| 2 | Original Equipment | 2022-03-13 | r0Ax1cOz2CIe8t20XMZjIw== |
| 3 | Class II Permissive Change | 2023-09-01 | zg3iDaNsiyXb751azd4TAQ== |
| 4 | Class II Permissive Change | 2023-09-01 | WJ7+wauy+wlAGJLku74kuA== |
Operating Frequencies
| Frequency Range | Power Output | Rule Parts | Grant Notes | App # |
|---|---|---|---|---|
2.402-2.48 GHz  | 5 mW | 15C | CC | 2.1 |
| 2.402-2.48 GHz | 5 mW | 15C | CC | 3.1 |
| 6.4896-7.9872 GHz | 15F | CC | 1.1 | |
| 6.4896-7.9872 GHz | 15F | CC | 4.1 |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Antenna Date Sheet | Test Report Adobe Acrobat PDF (959 kB) |
2023-09-01 2023-09-01 |
| 4 | Test report | Test Report Adobe Acrobat PDF (1980 kB) |
2023-09-01 2023-09-01 |
| 4 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (324 kB) |
2023-09-01 2023-09-01 |
| 4 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (373 kB) |
2023-09-01 2023-09-01 |
| 4 | Internal photo | Internal Photos Adobe Acrobat PDF (334 kB) |
2023-09-01 2023-09-01 |
| 4 | External photo | External Photos Adobe Acrobat PDF (551 kB) |
2023-09-01 2023-09-01 |
| 4 | QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements Adobe Acrobat PDF (112 kB) |
2023-09-01 2023-09-01 |
| 4 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2023-09-01 2023-09-01 |
| 4 | FCC_Class II Permissive Change Request | Cover Letter(s) Adobe Acrobat PDF (63 kB) |
2023-09-01 2023-09-01 |
| 4 | Attestation Statements US agent for service of process | Attestation Statements Adobe Acrobat PDF (154 kB) |
2023-09-01 2023-09-01 |
| 4 | User Manual | Users Manual Adobe Acrobat PDF (439 kB) |
2023-09-01 2023-09-01 |
| 3 | Antenna Date Sheet | Test Report Adobe Acrobat PDF (959 kB) |
2023-09-01 2023-09-01 |
| 3 | Test report | Test Report Adobe Acrobat PDF (1783 kB) |
2023-09-01 2023-09-01 |
| 3 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (324 kB) |
2023-09-01 2023-09-01 |
| 3 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (373 kB) |
2023-09-01 2023-09-01 |
| 3 | Internal photo | Internal Photos Adobe Acrobat PDF (334 kB) |
2023-09-01 2023-09-01 |
| 3 | External photo | External Photos Adobe Acrobat PDF (551 kB) |
2023-09-01 2023-09-01 |
| 3 | QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements Adobe Acrobat PDF (112 kB) |
2023-09-01 2023-09-01 |
| 3 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2023-09-01 2023-09-01 |
| 3 | FCC_Class II Permissive Change Request | Cover Letter(s) Adobe Acrobat PDF (63 kB) |
2023-09-01 2023-09-01 |
| 3 | Attestation Statements US agent for service of process | Attestation Statements Adobe Acrobat PDF (154 kB) |
2023-09-01 2023-09-01 |
| 3 | User Manual | Users Manual Adobe Acrobat PDF (439 kB) |
2023-09-01 2023-09-01 |
| 1 | Test Report | Test Report Adobe Acrobat PDF (3742 kB) |
2022-03-08 2022-03-13 |
| 1 | User Manual | Users Manual Adobe Acrobat PDF (413 kB) |
2022-03-01 2022-04-27 |
| 2 | User Manual | Users Manual Adobe Acrobat PDF (413 kB) |
2022-03-01 2022-04-27 |
| 1 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (700 kB) |
2022-02-28 2022-03-13 |
| 1 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (1770 kB) |
2022-02-28 2022-04-27 |
| 1 | Internal photo | Internal Photos Adobe Acrobat PDF (600 kB) |
2022-02-28 2022-04-27 |
| 1 | External photo | External Photos Adobe Acrobat PDF (809 kB) |
2022-02-28 2022-04-27 |
| 1 | Label_Location_Justification_Letter | ID Label/Location Info Adobe Acrobat PDF (68 kB) |
2022-02-28 2022-03-13 |
| 1 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (38 kB) |
2022-02-28 2022-03-13 |
| 1 | FCC Special Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2022-02-28 2022-03-13 |
| 1 | FCC Modular Cover letter | Cover Letter(s) Adobe Acrobat PDF (332 kB) |
2022-02-28 2022-03-13 |
| 1 | Applicant_Declaration_Letter | Cover Letter(s) Adobe Acrobat PDF (160 kB) |
2022-02-28 2022-03-13 |
| 1 | FCC Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (149 kB) |
2022-02-28 2022-03-13 |
| 2 | Test report | Test Report Adobe Acrobat PDF (1697 kB) |
2022-02-28 2022-03-13 |
| 2 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (700 kB) |
2022-02-28 2022-03-13 |
| 2 | Appendix A_BLE | Test Report Adobe Acrobat PDF (2080 kB) |
2022-02-28 2022-03-13 |
| 2 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (1770 kB) |
2022-02-28 2022-04-27 |
| 2 | Internal photo | Internal Photos Adobe Acrobat PDF (600 kB) |
2022-02-28 2022-04-27 |
| 2 | External photo | External Photos Adobe Acrobat PDF (809 kB) |
2022-02-28 2022-04-27 |
| 2 | Label_Location_Justification_Letter | ID Label/Location Info Adobe Acrobat PDF (68 kB) |
2022-02-28 2022-03-13 |
| 2 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (38 kB) |
2022-02-28 2022-03-13 |
| 2 | FCC Special Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2022-02-28 2022-03-13 |
| 2 | FCC Modular Cover letter | Cover Letter(s) Adobe Acrobat PDF (332 kB) |
2022-02-28 2022-03-13 |
| 2 | Applicant_Declaration_Letter | Cover Letter(s) Adobe Acrobat PDF (160 kB) |
2022-02-28 2022-03-13 |
| 2 | FCC Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (149 kB) |
2022-02-28 2022-03-13 |
APP # 4 (2023-09-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Antenna Date Sheet | Test Report Adobe Acrobat PDF (959 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | Test report | Test Report Adobe Acrobat PDF (1980 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (324 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (373 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | Internal photo | Internal Photos Adobe Acrobat PDF (334 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | External photo | External Photos Adobe Acrobat PDF (551 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements Adobe Acrobat PDF (112 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | FCC_Class II Permissive Change Request | Cover Letter(s) Adobe Acrobat PDF (63 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | Attestation Statements US agent for service of process | Attestation Statements Adobe Acrobat PDF (154 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 4 | User Manual | Users Manual Adobe Acrobat PDF (439 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
APP # 3 (2023-09-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Antenna Date Sheet | Test Report Adobe Acrobat PDF (959 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | Test report | Test Report Adobe Acrobat PDF (1783 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (324 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (373 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | Internal photo | Internal Photos Adobe Acrobat PDF (334 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | External photo | External Photos Adobe Acrobat PDF (551 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements Adobe Acrobat PDF (112 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (89 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | FCC_Class II Permissive Change Request | Cover Letter(s) Adobe Acrobat PDF (63 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | Attestation Statements US agent for service of process | Attestation Statements Adobe Acrobat PDF (154 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
| 3 | User Manual | Users Manual Adobe Acrobat PDF (439 kB) |
2023-09-01 00:00:00 2023-09-01 00:00:00 |
APP # 1 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Test Report | Test Report Adobe Acrobat PDF (3742 kB) |
2022-03-08 00:00:00 2022-03-13 00:00:00 |
| 1 | User Manual | Users Manual Adobe Acrobat PDF (413 kB) |
2022-03-01 00:00:00 2022-04-27 00:00:00 |
APP # 2 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | User Manual | Users Manual Adobe Acrobat PDF (413 kB) |
2022-03-01 00:00:00 2022-04-27 00:00:00 |
APP # 1 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (700 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (1770 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 1 | Internal photo | Internal Photos Adobe Acrobat PDF (600 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 1 | External photo | External Photos Adobe Acrobat PDF (809 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 1 | Label_Location_Justification_Letter | ID Label/Location Info Adobe Acrobat PDF (68 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (38 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | FCC Special Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | FCC Modular Cover letter | Cover Letter(s) Adobe Acrobat PDF (332 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | Applicant_Declaration_Letter | Cover Letter(s) Adobe Acrobat PDF (160 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 1 | FCC Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (149 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
APP # 2 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Test report | Test Report Adobe Acrobat PDF (1697 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (700 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | Appendix A_BLE | Test Report Adobe Acrobat PDF (2080 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | Test setup photo | Test Setup Photos Adobe Acrobat PDF (1770 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 2 | Internal photo | Internal Photos Adobe Acrobat PDF (600 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 2 | External photo | External Photos Adobe Acrobat PDF (809 kB) |
2022-02-28 00:00:00 2022-04-27 00:00:00 |
| 2 | Label_Location_Justification_Letter | ID Label/Location Info Adobe Acrobat PDF (68 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | Auth letter | Cover Letter(s) Adobe Acrobat PDF (38 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | FCC Special Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | FCC Modular Cover letter | Cover Letter(s) Adobe Acrobat PDF (332 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | Applicant_Declaration_Letter | Cover Letter(s) Adobe Acrobat PDF (160 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
| 2 | FCC Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (149 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
APP # 1 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Block diagram | Block Diagram Adobe Acrobat PDF (296 kB) |
2022-02-28 00:00:00 N/A |
| 1 | Schematics | Schematics Adobe Acrobat PDF (319 kB) |
2022-02-28 00:00:00 N/A |
APP # 2 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Operational description | Operational Description Adobe Acrobat PDF (80 kB) |
2022-02-28 00:00:00 N/A |
APP # 1 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Operational description | Operational Description Adobe Acrobat PDF (80 kB) |
2022-02-28 00:00:00 N/A |
| 1 | Test report | Test Report Adobe Acrobat PDF (3948 kB) |
2022-02-28 00:00:00 2022-03-13 00:00:00 |
APP # 2 (2022-03-13)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Block diagram | Block Diagram Adobe Acrobat PDF (296 kB) |
2022-02-28 00:00:00 N/A |
| 2 | Schematics | Schematics Adobe Acrobat PDF (319 kB) |
2022-02-28 00:00:00 N/A |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 03/13/2022 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | UWB+BLE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 03/13/2022 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | UWB+BLE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA838325 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/01/2023 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: KENJI HAYASHIKOSHI , SENIOR MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Ultra Wideband Transmitter |
| Notes: | UWB+BLE Combo Module plus 1055 ANT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15F | 6489.6 - 7987.2 |
| Class II Permissive Change to add a new AoA/PDoA antenna. Single Modular Approval. This device is approved under Part 15.519 for handheld use. The use of antennas mounted on outdoor structures is prohibited. Antennas may be mounted only on the handheld UWB device. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 09/01/2023 |
| Attention: KENJI HAYASHIKOSHI , SENIOR MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Ultra Wideband Transmitter |
| Notes: | UWB+BLE Combo Module plus 1055 ANT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15F | 6489.6 - 7987.2 |
| Class II Permissive Change to add a new AoA/PDoA antenna. Single Modular Approval. This device is approved under Part 15.519 for handheld use. The use of antennas mounted on outdoor structures is prohibited. Antennas may be mounted only on the handheld UWB device. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA445236 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 03/13/2022 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Ultra Wideband Transmitter |
| Notes: | UWB+BLE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15F | 6489.6 - 7987.2 |
| Single Modular Approval. This device is approved under Part 15.519 for handheld use. The use of antennas mounted on outdoor structures is prohibited. Antennas may be mounted only on the handheld UWB device. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 03/13/2022 |
| Attention: MOTOO HAYASHI , GENERAL MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Ultra Wideband Transmitter |
| Notes: | UWB+BLE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15F | 6489.6 - 7987.2 |
| Single Modular Approval. This device is approved under Part 15.519 for handheld use. The use of antennas mounted on outdoor structures is prohibited. Antennas may be mounted only on the handheld UWB device. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The antenna(s) used for this transmitter used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA183125 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/01/2023 |
| Murata Manufacturing Co., Ltd. |
| 10-1, Higashikotari 1-chome |
| Nagaokakyo-shi |
| Kyoto, 617-8555 Japan |
| Attention: KENJI HAYASHIKOSHI , SENIOR MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | UWB+BLE Combo Module plus 1055 ANT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add a new higher gain antenna. Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Manufacturing Co., Ltd. 10-1, Higashikotari 1-chome Nagaokakyo-shi Kyoto, 617-8555 Japan |
Date of Grant: 09/01/2023 |
| Attention: KENJI HAYASHIKOSHI , SENIOR MANAGER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | VPYLB2AB |
| Name of Grantee: | Murata Manufacturing Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | UWB+BLE Combo Module plus 1055 ANT |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to add a new higher gain antenna. Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA420473 |