FCC ID X8WBC840M
Bluetooth 5.0 Module
by Fanstel Corporation, Taipei
Grantee Code: X8W Product Code: BC840M
Latest application date: 2024-09-02
FCC ID Device Details
| FCC ID | X8WBC840M |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | X8W |
| Product Code | BC840M |
| Applicant Business | Fanstel Corporation, Taipei 🇹🇼 |
| Related Domains |  fanstelsystems.com |
| Equipment Class | Bluetooth 5.0 Module |
| Test Firm | International Standards Laboratory Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-02 |
| 2402-2480 MHz | Original Equipment | 2019-03-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-03-11 | PDF 475.4 KB |
| Internal Photos | Internal Photos | 2024-09-02 | PDF 651.7 KB |
| Internal Photos | Internal Photos | 2019-03-11 | PDF 193.9 KB |
| External Photos | External Photos | 2024-09-02 | PDF 2 MB |
| External Photos | External Photos | 2019-03-11 | PDF 193.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2024-09-02 | PDF 305.2 KB |
| Test Setup Photos | Test Setup Photos | 2024-09-02 | PDF 1.5 MB |
| Test Setup Photos | Test Setup Photos | 2019-03-11 | PDF 634.4 KB |
| BC840E-dipole antenna spec. | Test Report | 2024-09-02 | PDF 847.8 KB |
| ISL-18LR474ANT(BC840) report | Test Report | 2024-09-02 | PDF 1.2 MB |
| ISL-18LR474ANT(BC840M) report | Test Report | 2024-09-02 | PDF 504.6 KB |
| Test Report | Test Report | 2024-09-02 | PDF 1.7 MB |
| Test Report | Test Report | 2019-03-11 | PDF 1.2 MB |
| Agent Letter_A_for Service of Process_FCC_Attestation Statements | Attestation Statements | 2024-09-02 | PDF 106.8 KB |
| Attestation_FCC_Application Letter | Attestation Statements | 2024-09-02 | PDF 643.5 KB |
| Declaration of authorization | Cover Letter(s) | 2024-09-02 | PDF 477.2 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2024-09-02 | PDF 328.3 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2024-09-02 | PDF 685.2 KB |
| Declaration of authorization | Cover Letter(s) | 2019-03-11 | PDF 151.7 KB |
| Modular Approval Request | Cover Letter(s) | 2019-03-11 | PDF 97.8 KB |
| confidentiality | Cover Letter(s) | 2019-03-11 | PDF 212 KB |
| FCC_IC-MPE_Mobile device | RF Exposure Info | 2024-09-02 | PDF 265.2 KB |
| RF Exposure _FCC_IC_ Portable | RF Exposure Info | 2024-09-02 | PDF 256.7 KB |
| RF Exposure Info | RF Exposure Info | 2019-03-11 | PDF 79.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 58.8 KB | |
| Schematics Metadata only | Schematics | PDF 26.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 7.8 KB |
Application Information
| Application ID | e+SqmUDD9JAYnnSD73e6JA== |
|---|---|
| Final Action Date | 2024-09-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019658053 |
| Model | BC840M |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth 5.0 Module |
| Responsible Party | Paudy Tung, Engineer, paudyt@fanstelsystems.com , 886-2-26989328 |
| Technical Contact | Jerry Liu, International Standards Laboratory Corp., Jerry_CF_Liu@isl.com.tw  , 886-3-263-8888 |
| Test Firm | Benson Chen, International Standards Laboratory Corp., Benson_Chen@isl.com.tw , 886-3-263-8888 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. This change is : a. Reduce output power. b. Change RF exposure condition to portable condition. Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| e+SqmUDD9JAYnnSD73e6JA== | 2024-09-02 | Class II permissive change or modification of presently authorized equipment |
| NEDuxCJNhxpSATUr88465A== | 2019-03-11 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0350000 | 15C |
Grants
TCB Grant - Application NEDuxCJNhxpSATUr88465A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/11/2019 Application Dated: 03/07/2019 |
| Fanstel Corporation, Taipei |
| 10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, |
| New Taipei City, 221 Taiwan |
| Attention: Paudy Tung , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X8WBC840M |
| Name of Grantee: | Fanstel Corporation, Taipei |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.035 |
| Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application NEDuxCJNhxpSATUr88465A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fanstel Corporation, Taipei 10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, New Taipei City, 221 Taiwan |
Date of Grant: 03/11/2019 Application Dated: 03/07/2019 |
| Attention: Paudy Tung , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X8WBC840M |
| Name of Grantee: | Fanstel Corporation, Taipei |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.035 |
| Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/02/2024 Application Dated: 08/29/2024 |
| Fanstel Corporation, Taipei |
| 10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, |
| New Taipei City, 221 Taiwan |
| Attention: Paudy Tung , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X8WBC840M |
| Name of Grantee: | Fanstel Corporation, Taipei |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.035 |
| Class II Permissive Change. This change is : a. Reduce output power. b. Change RF exposure condition to portable condition. Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application e+SqmUDD9JAYnnSD73e6JA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fanstel Corporation, Taipei 10F-10, No. 79, Sec. 1, Hsin Tai Wu Rd., Hsi-Chih, New Taipei City, 221 Taiwan |
Date of Grant: 09/02/2024 Application Dated: 08/29/2024 |
| Attention: Paudy Tung , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | X8WBC840M |
| Name of Grantee: | Fanstel Corporation, Taipei |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.0 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.035 |
| Class II Permissive Change. This change is : a. Reduce output power. b. Change RF exposure condition to portable condition. Modular Approval. Power output listed is conducted. The device is mobile. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and "Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |