FCC ID XMR201911SC20AL

Smart Module

by Quectel Wireless Solutions Company Limited

Grantee Code: XMR   Product Code: 201911SC20AL
Latest application date: 2020-01-03

FCC ID Device Details

FCC IDXMR201911SC20AL
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXMR
Product Code201911SC20AL
Applicant BusinessQuectel Wireless Solutions Company Limited 🇨🇳
Related Domains quectel.com
Equipment ClassSmart Module
Test FirmSporton International (Kunshan) Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172020-01-03
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172020-01-03
701.5-713.5 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172020-01-03
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172020-01-03

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-06-30PDF 1.8 MB
Internal photosInternal Photos2020-06-30PDF 381.4 KB
External photosExternal Photos2020-06-30PDF 1.1 MB
LabelID Label/Location Info2020-01-03PDF 41.9 KB
Label locationID Label/Location Info2020-01-03PDF 32 KB
Reference LTE Band 26 test setupTest Setup Photos2020-06-30PDF 165.7 KB
Reference LTE test setupTest Setup Photos2020-06-30PDF 171 KB
Reference test setupTest Setup Photos2020-06-30PDF 300.5 KB
Reference test setupTest Setup Photos2020-06-30PDF 159.8 KB
Reference test setupTest Setup Photos2020-06-30PDF 265.5 KB
Reference test setupTest Setup Photos2020-06-30PDF 269.1 KB
Reference test setup DFSTest Setup Photos2020-06-30PDF 272.3 KB
Reference LTE test report Band 26Test Report2020-01-03PDF 5.1 MB
Reference LTE test report part 1Test Report2020-01-03PDF 5.7 MB
Reference LTE test report part 2Test Report2020-01-03PDF 5.6 MB
Reference LTE test report part 3Test Report2020-01-03PDF 5.7 MB
Reference LTE test report part 4Test Report2020-01-03PDF 5.7 MB
Reference LTE test report part 5Test Report2020-01-03PDF 5.8 MB
Reference LTE test report part 6Test Report2020-01-03PDF 5.7 MB
Reference LTE test report part 7Test Report2020-01-03PDF 4.6 MB
Reference test reportTest Report2020-01-03PDF 4.8 MB
Reference test reportTest Report2020-01-03PDF 4.6 MB
Reference test reportTest Report2020-01-03PDF 1.9 MB
Reference test reportTest Report2020-01-03PDF 2.2 MB
Reference test report DFSTest Report2020-01-03PDF 733.4 KB
Test reportTest Report2020-01-03PDF 254.8 KB
Test reportTest Report2020-01-03PDF 254.1 KB
Test reportTest Report2020-01-03PDF 259 KB
Test reportTest Report2020-01-03PDF 255.5 KB
Test report DFSTest Report2020-01-03PDF 238.5 KB
Test report LTETest Report2020-01-03PDF 260.1 KB
Test report LTE Band 26Test Report2020-01-03PDF 255 KB
Cover letterCover Letter(s)2020-01-03PDF 101.4 KB
RF ExposureRF Exposure Info2020-01-03PDF 237.1 KB
Reference RF ExposureRF Exposure Info2020-01-03PDF 671.7 KB

Application Information

Application IDhW181OcQ3mT6CckssJYcBQ==
Final Action Date2020-01-03
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
Applicant FRN0018988279
Model201911SC20AL
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSmart Module
Responsible PartyJean Hu, jean.hu@quectel.com , +8602150086326
Test FirmJim Tsai, Sporton International (Kunshan) Inc., JimTsai@sporton.com.tw , +86 0512 57900158
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/30/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
hW181OcQ3mT6CckssJYcBQ==2020-01-03Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
WJurPWdPgXvcJYvuwC5KHQ==2020-01-03Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
NaRGmtQitTo0h0f3JiLMjg==2020-01-03Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
FL94FjVjoSUvBto82738eg==2020-01-03Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
701.5-713.5 MHz0.23070.0052ppm4M49W7D27
704-711 MHz0.28120.0052ppm9M11G7D27
704-711 MHz0.22750.0052ppm9M05W7D27
779.5-784.5 MHz0.34670.0035ppm4M52G7D27
779.5-784.5 MHz0.28640.0035ppm4M50W7D27
782 MHz0.33110.0035ppm9M03G7D27
782 MHz0.28250.0035ppm9M05W7D27
815.5-822.5 MHz0.21980.0045ppm2M73G7D22H, 9
821.5 MHz0.21380.0045ppm13M4G7D22H, 9
821.5 MHz0.1910.0045ppm13M4W7D22H, 9
825.5-847.5 MHz0.21630.0044ppm2M72G7D22H
826.5-846.5 MHz0.21180.0061ppm4M50G7D22H
829-844 MHz0.21280.0044ppm9M03G7D22H
829-844 MHz0.20460.0044ppm9M03W7D22H
831.5-841.5 MHz0.20370.0061ppm13M5G7D22H
831.5-841.5 MHz0.20.0061ppm13M5W7D22H
1712.4-1752.6 MHz0.37670.0144ppm4M15F9W27
1720-1745 MHz0.38110.0028ppm18M4G7D27
1720-1745 MHz0.33570.0028ppm18M6W7D27
1850.2-1909.8 MHz1.75790.0122ppm245KGXW24E
1850.2-1909.8 MHz0.68710.0117ppm248KG7W24E
1850.7-1914.3 MHz0.29380.0013ppm1M09W7D24E
1852.4-1907.6 MHz0.35810.0213ppm4M15F9W24E
1855-1910 MHz0.35560.0013ppm8M99G7D24E
1857.5-1902.5 MHz0.35810.0021ppm13M5G7D24E
1857.5-1902.5 MHz0.30480.0021ppm13M5W7D24E
1860-1905 MHz0.34670.0013ppm18M2G7D24E
1860-1905 MHz0.27670.0013ppm18M3W7D24E
1860-1900 MHz0.34040.0021ppm18M3G7D24E
1860-1900 MHz0.28640.0021ppm18M4W7D24E
2402-2480 MHz0.006500015CCC
2402-2480 MHz0.00215CCC
2412-2462 MHz0.146915CCC
2422-2452 MHz0.162615CCC
2507.5-2562.5 MHz0.44460.0009ppm13M5W7D27
2510-2560 MHz0.51050.0009ppm18M5G7D27
2510-2560 MHz0.43850.0009ppm18M5W7D27
5190-5230 MHz0.019915E38, CC
5260-5320 MHz0.024615E38, CC
5270-5310 MHz0.020915E38, CC
5500-5580 MHz0.019615E38, CC
5510-5550 MHz0.011615E38, CC
5660-5700 MHz0.020715E38, CC
5670 MHz0.01715E38, CC
5745-5825 MHz0.015715E38, CC
5755-5795 MHz0.01215E38, CC

Grants

TCB Grant - Application WJurPWdPgXvcJYvuwC5KHQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/03/2020

Application Dated: 01/02/2020
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Digital Transmission System
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WJurPWdPgXvcJYvuwC5KHQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 01/03/2020

Application Dated: 01/02/2020
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Digital Transmission System
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NaRGmtQitTo0h0f3JiLMjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/03/2020

Application Dated: 01/02/2020
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.7865 0.0203  PM 243KGXW
22H 824.2  -  848.8 0.4753 0.043  PM 247KG7W
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1850.2  -  1909.8 1.7579 0.0122  PM 245KGXW
24E 1850.2  -  1909.8 0.6871 0.0117  PM 248KG7W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
27 1712.4  -  1752.6 0.3767 0.0144  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 2510.0  -  2560.0 0.5105 0.0009  PM 18M5G7D
27 2510.0  -  2560.0 0.4385 0.0009  PM 18M5W7D
27 2507.5  -  2562.5 0.4446 0.0009  PM 13M5W7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D
27 782.0  -  782.0 0.3311 0.0035  PM 9M03G7D
27 782.0  -  782.0 0.2825 0.0035  PM 9M05W7D
27 779.5  -  784.5 0.3467 0.0035  PM 4M52G7D
27 779.5  -  784.5 0.2864 0.0035  PM 4M50W7D
24E 1860.0  -  1905.0 0.3467 0.0013  PM 18M2G7D
24E 1860.0  -  1905.0 0.2767 0.0013  PM 18M3W7D
24E 1855.0  -  1910.0 0.3556 0.0013  PM 8M99G7D
24E 1850.7  -  1914.3 0.2938 0.0013  PM 1M09W7D
22H 831.5  -  841.5 0.2037 0.0061  PM 13M5G7D
22H 831.5  -  841.5 0.2 0.0061  PM 13M5W7D
22H 826.5  -  846.5 0.2118 0.0061  PM 4M50G7D
90, 22H 821.5  -  821.5 0.2138 0.0045  PM 13M4G7D
90, 22H 821.5  -  821.5 0.191 0.0045  PM 13M4W7D
90, 22H 815.5  -  822.5 0.2198 0.0045  PM 2M73G7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.

EAS Grant - Application NaRGmtQitTo0h0f3JiLMjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 01/03/2020

Application Dated: 01/02/2020
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.7865 0.0203  PM 243KGXW
22H 824.2  -  848.8 0.4753 0.043  PM 247KG7W
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1850.2  -  1909.8 1.7579 0.0122  PM 245KGXW
24E 1850.2  -  1909.8 0.6871 0.0117  PM 248KG7W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
27 1712.4  -  1752.6 0.3767 0.0144  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 2510.0  -  2560.0 0.5105 0.0009  PM 18M5G7D
27 2510.0  -  2560.0 0.4385 0.0009  PM 18M5W7D
27 2507.5  -  2562.5 0.4446 0.0009  PM 13M5W7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D
27 782.0  -  782.0 0.3311 0.0035  PM 9M03G7D
27 782.0  -  782.0 0.2825 0.0035  PM 9M05W7D
27 779.5  -  784.5 0.3467 0.0035  PM 4M52G7D
27 779.5  -  784.5 0.2864 0.0035  PM 4M50W7D
24E 1860.0  -  1905.0 0.3467 0.0013  PM 18M2G7D
24E 1860.0  -  1905.0 0.2767 0.0013  PM 18M3W7D
24E 1855.0  -  1910.0 0.3556 0.0013  PM 8M99G7D
24E 1850.7  -  1914.3 0.2938 0.0013  PM 1M09W7D
22H 831.5  -  841.5 0.2037 0.0061  PM 13M5G7D
22H 831.5  -  841.5 0.2 0.0061  PM 13M5W7D
22H 826.5  -  846.5 0.2118 0.0061  PM 4M50G7D
90, 22H 821.5  -  821.5 0.2138 0.0045  PM 13M4G7D
90, 22H 821.5  -  821.5 0.191 0.0045  PM 13M4W7D
90, 22H 815.5  -  822.5 0.2198 0.0045  PM 2M73G7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.



TCB Grant - Application hW181OcQ3mT6CckssJYcBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/03/2020

Application Dated: 01/02/2020
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC 15E 5260.0  -  5320.0 0.0246  
38 CC 15E 5270.0  -  5310.0 0.0209  
38 CC 15E 5500.0  -  5580.0 0.0196  
38 CC 15E 5660.0  -  5700.0 0.0207  
38 CC 15E 5510.0  -  5550.0 0.0116  
38 CC 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hW181OcQ3mT6CckssJYcBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 01/03/2020

Application Dated: 01/02/2020
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC 15E 5260.0  -  5320.0 0.0246  
38 CC 15E 5270.0  -  5310.0 0.0209  
38 CC 15E 5500.0  -  5580.0 0.0196  
38 CC 15E 5660.0  -  5700.0 0.0207  
38 CC 15E 5510.0  -  5550.0 0.0116  
38 CC 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application FL94FjVjoSUvBto82738eg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/03/2020

Application Dated: 01/02/2020
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FL94FjVjoSUvBto82738eg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 01/03/2020

Application Dated: 01/02/2020
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR201911SC20AL
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Smart Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: