FCC ID XMR2022SC690ANA

Multi-mode Smart LTE Module

by Quectel Wireless Solutions Company Limited

Grantee Code: XMR   Product Code: 2022SC690ANA
Latest application date: 2022-10-07

FCC ID Device Details

FCC IDXMR2022SC690ANA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeXMR
Product Code2022SC690ANA
Applicant BusinessQuectel Wireless Solutions Company Limited 🇨🇳
Related Domains quectel.com
Equipment ClassMulti-mode Smart LTE Module
Test FirmSGS-CSTC Standards Technical Services (Suzhou) Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2022-10-07
2510-2560 MHzOriginal Equipment2022-10-07
2412-2462 MHzOriginal Equipment2022-10-07
2402-2480 MHzOriginal Equipment2022-10-07

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2022-11-21PDF 3 MB
Internal PhotosInternal Photos2022-11-21PDF 406.3 KB
External PhotoExternal Photos2022-11-21PDF 1 MB
Label and LocationID Label/Location Info2022-10-07PDF 65.7 KB
Test Setup Photos NIITest Setup Photos2022-11-21PDF 761.9 KB
Test Setup Photos PCBTest Setup Photos2022-11-21PDF 590.4 KB
Antenna ReportTest Report2022-10-07PDF 1.3 MB
Appendix LTE Band12Test Report2022-10-07PDF 4.3 MB
Appendix LTE Band13Test Report2022-10-07PDF 2 MB
Appendix LTE Band14Test Report2022-10-07PDF 2.7 MB
Appendix LTE Band17Test Report2022-10-07PDF 2.9 MB
Appendix LTE Band2Test Report2022-10-07PDF 5.6 MB
Appendix LTE Band25Test Report2022-10-07PDF 5.6 MB
Appendix LTE Band26(814-824)Test Report2022-10-07PDF 3.2 MB
Appendix LTE Band26(824-849)Test Report2022-10-07PDF 5 MB
Appendix LTE Band4Test Report2022-10-07PDF 5.6 MB
Appendix LTE Band5Test Report2022-10-07PDF 4.3 MB
Appendix LTE Band66Test Report2022-10-07PDF 5.6 MB
Appendix LTE Band7Test Report2022-10-07PDF 4.6 MB
Test ReportTest Report2022-10-07PDF 1.4 MB
Test Report BLETest Report2022-10-07PDF 4.6 MB
Test Report BTTest Report2022-10-07PDF 5.5 MB
Test Report WIFI 5G-1Test Report2022-10-07PDF 5.4 MB
Test Report WIFI 5G-2Test Report2022-10-07PDF 5.5 MB
Test Report WIFI 5G-3Test Report2022-10-07PDF 5.5 MB
Test Report WIFI 5G-4Test Report2022-10-07PDF 5.8 MB
Test Report WIFI 5G-5Test Report2022-10-07PDF 5.5 MB
Test Report WIFI 5G-6Test Report2022-10-07PDF 3.6 MB
Test Report WIFI2.4G -1Test Report2022-10-07PDF 5.6 MB
Test Report WIFI2.4G -2Test Report2022-10-07PDF 4.7 MB
CONF LetterCover Letter(s)2022-10-07PDF 72.8 KB
Declaration of ConformityCover Letter(s)2022-10-07PDF 126.5 KB
Modular Approve LetterCover Letter(s)2022-10-07PDF 159 KB
POA LetterCover Letter(s)2022-10-07PDF 103.1 KB
RF Exposure InfoRF Exposure Info2022-10-07PDF 758 KB
Block Diagram Metadata onlyBlock DiagramPDF 33.9 KB
PCB Layout Metadata onlySchematicsPDF 531.4 KB
Parts Placement Metadata onlySchematicsPDF 188.2 KB
Schematics Metadata onlySchematicsPDF 436.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 248.8 KB
Software Security Metadata onlySDR Software/Security InfPDF 160.3 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 126.3 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 73.8 KB

Application Information

Application IDqxc1pI5PWImlLdrYOHOfgw==
Final Action Date2022-10-07
Application PurposeOriginal Equipment
Applicant FRN0018988279
Model2022SC690ANA
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMulti-mode Smart LTE Module
Responsible PartyJean Hu, jean.hu@quectel.com , +8602150086326
Test FirmVinny Chen, SGS-CSTC Standards Technical Services (Suzhou) Co., Vinny.Chen@sgs.com , +86 13728676901
TCB EmailTEI@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/21/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
qxc1pI5PWImlLdrYOHOfgw==2022-10-07Original Equipment
IjIoJTZCZ1mOsZchZ00UGw==2022-10-07Original Equipment
E/6W6gGCOOhc1u6mZDsO/Q==2022-10-07Original Equipment
3Tp8zcy3ZXhIw4i/N6teow==2022-10-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
700.5-714.5 MHz0.1840.1ppm2M69W7D27
701.5-713.5 MHz0.2230.1ppm4M49G7D27
704-711 MHz0.2130.1ppm8M93G7D27
704-711 MHz0.1630.1ppm8M91W7D27
706.5-713.5 MHz0.2220.1ppm4M47G7D27
709-711 MHz0.2160.1ppm8M92G7D27
709-711 MHz0.1630.1ppm8M91W7D27
779.5-784.5 MHz0.2130.1ppm4M47G7D27
779.5-784.5 MHz0.1580.1ppm4M47W7D27
782 MHz0.1950.1ppm8M92G7D27
782 MHz0.1560.1ppm8M91W7D27
790.5-795.5 MHz0.2230.1ppm4M47G7D9
793 MHz0.2140.1ppm8M93G7D9
793 MHz0.1850.1ppm8M91W7D9
815.5-822.5 MHz0.1730.1ppm2M69W7D9
816.5-821.5 MHz0.2130.1ppm4M47G7D9
819 MHz0.2030.1ppm8M91G7D9
819 MHz0.1710.1ppm8M91W7D9
826.5-846.5 MHz0.1680.1ppm4M46W7D22H
826.5-846.5 MHz0.1790.1ppm4M46W7D22H
829-844 MHz0.2120.1ppm8M94G7D22H
829-844 MHz0.2080.1ppm8M94G7D22H
829-844 MHz0.1670.1ppm8M92W7D22H
831.5-841.5 MHz0.1970.1ppm13M5G7D22H
831.5-841.5 MHz0.1560.1ppm13M5W7D22H
1710.7-1754.3 MHz0.1680.1ppm1M10W7D27
1711.5-1778.5 MHz0.1580.1ppm2M69W7D27
1715-1775 MHz0.1960.1ppm8M93G7D27
1715-1750 MHz0.2020.1ppm8M93G7D27
1720-1770 MHz0.1830.1ppm17M9G7D27
1720-1770 MHz0.1440.1ppm17M9W7D27
1720-1745 MHz0.1520.1ppm17M9W7D27
1852.5-1912.5 MHz0.2090.1ppm4M47G7D24E
1855-1910 MHz0.1720.1ppm8M90W7D24E
1860-1905 MHz0.2060.1ppm17M9G7D24E
1860-1905 MHz0.1580.1ppm17M9W7D24E
2402-2480 MHz0.013000015CCC
2402-2480 MHz0.00215CCC
2412-2462 MHz0.1215CCC
2505-2565 MHz0.1660.1ppm8M93G7D27
2507.5-2562.5 MHz0.1320.1ppm13M4W7D27
2510-2560 MHz0.1530.1ppm17M9G7D27
2510-2560 MHz0.1150.1ppm17M9W7D27
5180-5240 MHz0.03215ECC
5260-5320 MHz0.03215ECC
5500-5700 MHz0.03415ECC
5745-5825 MHz0.03315ECC

Grants

TCB Grant - Application qxc1pI5PWImlLdrYOHOfgw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/07/2022

Application Dated: 10/07/2022
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC 15E 5260.0  -  5320.0 0.032  
CC 15E 5500.0  -  5700.0 0.034  
CC 15E 5745.0  -  5825.0 0.033  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qxc1pI5PWImlLdrYOHOfgw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 10/07/2022

Application Dated: 10/07/2022
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC 15E 5260.0  -  5320.0 0.032  
CC 15E 5500.0  -  5700.0 0.034  
CC 15E 5745.0  -  5825.0 0.033  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IjIoJTZCZ1mOsZchZ00UGw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/07/2022

Application Dated: 10/07/2022
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.209 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.176 0.1  PM 17M9W7D
24E 1855.0  -  1905.0 0.177 0.1  PM 8M90W7D
27 1720.0  -  1745.0 0.196 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.152 0.1  PM 17M9W7D
27 1715.0  -  1750.0 0.202 0.1  PM 8M93G7D
27 1710.7  -  1754.3 0.168 0.1  PM 1M10W7D
22H 829.0  -  844.0 0.208 0.1  PM 8M94G7D
22H 829.0  -  844.0 0.167 0.1  PM 8M92W7D
22H 826.5  -  846.5 0.168 0.1  PM 4M46W7D
27 2510.0  -  2560.0 0.153 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.115 0.1  PM 17M9W7D
27 2505.0  -  2565.0 0.166 0.1  PM 8M93G7D
27 2507.5  -  2562.5 0.132 0.1  PM 13M4W7D
27 704.0  -  711.0 0.213 0.1  PM 8M93G7D
27 704.0  -  711.0 0.163 0.1  PM 8M91W7D
27 701.5  -  713.5 0.223 0.1  PM 4M49G7D
27 700.5  -  714.5 0.184 0.1  PM 2M69W7D
27 782.0  -  782.0 0.195 0.1  PM 8M92G7D
27 782.0  -  782.0 0.156 0.1  PM 8M91W7D
27 779.5  -  784.5 0.213 0.1  PM 4M47G7D
27 779.5  -  784.5 0.158 0.1  PM 4M47W7D
90 793.0  -  793.0 0.214 0.1  PM 8M93G7D
90 793.0  -  793.0 0.185 0.1  PM 8M91W7D
90 790.5  -  795.5 0.223 0.1  PM 4M47G7D
27 709.0  -  711.0 0.216 0.1  PM 8M92G7D
27 709.0  -  711.0 0.163 0.1  PM 8M91W7D
27 706.5  -  713.5 0.222 0.1  PM 4M47G7D
24E 1860.0  -  1905.0 0.206 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.158 0.1  PM 17M9W7D
24E 1852.5  -  1912.5 0.209 0.1  PM 4M47G7D
24E 1855.0  -  1910.0 0.172 0.1  PM 8M90W7D
90 819.0  -  819.0 0.203 0.1  PM 8M91G7D
90 819.0  -  819.0 0.171 0.1  PM 8M91W7D
90 816.5  -  821.5 0.213 0.1  PM 4M47G7D
90 815.5  -  822.5 0.173 0.1  PM 2M69W7D
22H 831.5  -  841.5 0.197 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.156 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.212 0.1  PM 8M94G7D
22H 826.5  -  846.5 0.179 0.1  PM 4M46W7D
27 1720.0  -  1770.0 0.183 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.144 0.1  PM 17M9W7D
27 1715.0  -  1775.0 0.196 0.1  PM 8M93G7D
27 1711.5  -  1778.5 0.158 0.1  PM 2M69W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 and emissions, which are conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; and LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26.

EAS Grant - Application IjIoJTZCZ1mOsZchZ00UGw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 10/07/2022

Application Dated: 10/07/2022
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: PCS Licensed Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.209 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.176 0.1  PM 17M9W7D
24E 1855.0  -  1905.0 0.177 0.1  PM 8M90W7D
27 1720.0  -  1745.0 0.196 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.152 0.1  PM 17M9W7D
27 1715.0  -  1750.0 0.202 0.1  PM 8M93G7D
27 1710.7  -  1754.3 0.168 0.1  PM 1M10W7D
22H 829.0  -  844.0 0.208 0.1  PM 8M94G7D
22H 829.0  -  844.0 0.167 0.1  PM 8M92W7D
22H 826.5  -  846.5 0.168 0.1  PM 4M46W7D
27 2510.0  -  2560.0 0.153 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.115 0.1  PM 17M9W7D
27 2505.0  -  2565.0 0.166 0.1  PM 8M93G7D
27 2507.5  -  2562.5 0.132 0.1  PM 13M4W7D
27 704.0  -  711.0 0.213 0.1  PM 8M93G7D
27 704.0  -  711.0 0.163 0.1  PM 8M91W7D
27 701.5  -  713.5 0.223 0.1  PM 4M49G7D
27 700.5  -  714.5 0.184 0.1  PM 2M69W7D
27 782.0  -  782.0 0.195 0.1  PM 8M92G7D
27 782.0  -  782.0 0.156 0.1  PM 8M91W7D
27 779.5  -  784.5 0.213 0.1  PM 4M47G7D
27 779.5  -  784.5 0.158 0.1  PM 4M47W7D
90 793.0  -  793.0 0.214 0.1  PM 8M93G7D
90 793.0  -  793.0 0.185 0.1  PM 8M91W7D
90 790.5  -  795.5 0.223 0.1  PM 4M47G7D
27 709.0  -  711.0 0.216 0.1  PM 8M92G7D
27 709.0  -  711.0 0.163 0.1  PM 8M91W7D
27 706.5  -  713.5 0.222 0.1  PM 4M47G7D
24E 1860.0  -  1905.0 0.206 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.158 0.1  PM 17M9W7D
24E 1852.5  -  1912.5 0.209 0.1  PM 4M47G7D
24E 1855.0  -  1910.0 0.172 0.1  PM 8M90W7D
90 819.0  -  819.0 0.203 0.1  PM 8M91G7D
90 819.0  -  819.0 0.171 0.1  PM 8M91W7D
90 816.5  -  821.5 0.213 0.1  PM 4M47G7D
90 815.5  -  822.5 0.173 0.1  PM 2M69W7D
22H 831.5  -  841.5 0.197 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.156 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.212 0.1  PM 8M94G7D
22H 826.5  -  846.5 0.179 0.1  PM 4M46W7D
27 1720.0  -  1770.0 0.183 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.144 0.1  PM 17M9W7D
27 1715.0  -  1775.0 0.196 0.1  PM 8M93G7D
27 1711.5  -  1778.5 0.158 0.1  PM 2M69W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 and emissions, which are conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; and LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26.



TCB Grant - Application E/6W6gGCOOhc1u6mZDsO/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/07/2022

Application Dated: 10/07/2022
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Digital Transmission System
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.12  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application E/6W6gGCOOhc1u6mZDsO/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 10/07/2022

Application Dated: 10/07/2022
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Digital Transmission System
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  
CC 15C 2412.0  -  2462.0 0.12  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3Tp8zcy3ZXhIw4i/N6teow==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/07/2022

Application Dated: 10/07/2022
Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII
(Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3Tp8zcy3ZXhIw4i/N6teow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Quectel Wireless Solutions Company Limited
Building 5, Shanghai Business Park PhaseIII (Area B),No.1016 Tianlin Road, Minhang District
Shanghai, 200233
China
  Date of Grant: 10/07/2022

Application Dated: 10/07/2022
 
Attention: Jean Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  XMR2022SC690ANA
Name of Grantee:  Quectel Wireless Solutions Company Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi-mode Smart LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.013  

Output Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: