1. FCC ID
  2. YPV
  3. YPVMIFIAMR510

FCC ID YPVMIFIAMR510

Mobile LTE Wi-Fi Router

by ITALCOM GROUP

Grantee Code: YPV   Product Code: MIFIAMR510
Latest application date: 2013-04-08

FCC ID Device Details

FCC IDYPVMIFIAMR510
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYPV
Product CodeMIFIAMR510
Applicant BusinessITALCOM GROUP 🇺🇸
Related Domains italcomgroup.com
Equipment ClassMobile LTE Wi-Fi Router
Test FirmBay Area Compliance Laboratory Corp. (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2013-04-08
826.4-846.6 MHzOriginal Equipment2013-04-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2013-04-08PDF 446.4 KB
Internal PhotosInternal Photos2013-04-08PDF 731.2 KB
External PhotosExternal Photos2013-04-08PDF 486.9 KB
FCC ID LabelID Label/Location Info2013-04-08PDF 117.5 KB
Block DiagramBlock Diagram2013-04-08PDF 740 KB
SchematicsSchematics2013-04-08PDF 554.3 KB
Circuit DescriptionOperational Description2013-04-08PDF 205.5 KB
Test Setup PhotosTest Setup Photos2013-04-08PDF 223.3 KB
Test Setup PhotosTest Setup Photos2013-04-08PDF 196.1 KB
RF Report Part 22H 24ETest Report2013-04-08PDF 457.6 KB
RF Report Part 27Test Report2013-04-08PDF 841.7 KB
Test ReportTest Report2013-04-08PDF 739.9 KB
POACover Letter(s)2013-04-08PDF 467.6 KB
Parts ListParts List/Tune Up Info2013-04-08PDF 118 KB
SAR ReportRF Exposure Info2013-04-08PDF 4.9 MB
SAR ReportRF Exposure Info2013-04-08PDF 4.9 MB
Tune up ProcedureParts List/Tune Up Info2013-04-08PDF 731 KB

Application Information

Application ID7iSgrzyvN0aLra6Gtb4WBw==
Final Action Date2013-04-08
Application PurposeOriginal Equipment
Applicant FRN0020115382
ModelMIFIAMR510
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMobile LTE Wi-Fi Router
Responsible PartyJorge Wagner Gilbert, Vice president, jwagner@italcomgroup.com , 305-5374715
Test FirmJohn Chan, Bay Area Compliance Laboratory Corp. (Shenzhen), john.chan@baclcorp.com , 08675533320018
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for filings under this FCC ID. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR in this frequency band for body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are: 0.11 W/kg, 1.36 W/kg, and 1.36 W/kg, respectively.

Applications

Application IDDatePurpose
7iSgrzyvN0aLra6Gtb4WBw==2013-04-08Original Equipment
6izgnX+j6kQGOYCR0Jfc1A==2013-04-08Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
1710.7-1754.3 MHz0.5162.5ppm1M11G7D27
1710.7-1754.3 MHz0.5162.5ppm1M11D7W27
1711.5-1753.5 MHz0.4822.5ppm2M73G7D27
1711.5-1753.5 MHz0.4932.5ppm2M71D7W27
1712.5-1752.5 MHz0.422.5ppm4M53G7D27
1712.5-1752.5 MHz0.432.5ppm4M55D7W27
1715-1750 MHz0.3742.5ppm9M02D7W27
1715-1750 MHz0.3832.5ppm9M02G7D27
1717.5-1747.5 MHz0.3662.5ppm13M5G7D27
1717.5-1747.5 MHz0.3742.5ppm13M5D7W27
1720-1745 MHz0.3262.5ppm18M0G7D27
1720-1745 MHz0.3332.5ppm17M9D7W27
1852.4-1907.6 MHz0.2612.5ppm4M17F9W24E
2412-2462 MHz0.097270015C

Grants

TCB Grant - Application 7iSgrzyvN0aLra6Gtb4WBw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 04/08/2013

Application Dated: 04/08/2013
ITALCOM GROUP
1728 Coral Way, Coral Gables
Miami, FL 518048
 
Attention: Jorge Gilbert , Vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YPVMIFIAMR510
Name of Grantee:  ITALCOM GROUP
Equipment Class: Digital Transmission System
Notes: Mobile LTE Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.09727  

Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for filings under this FCC ID. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR in this frequency band for body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are: 0.11 W/kg, 1.36 W/kg, and 1.36 W/kg, respectively.

EAS Grant - Application 7iSgrzyvN0aLra6Gtb4WBw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITALCOM GROUP
1728 Coral Way, Coral Gables
Miami, FL 518048
United States 		  Date of Grant: 04/08/2013

Application Dated: 04/08/2013
 
Attention: Jorge Gilbert , Vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YPVMIFIAMR510
Name of Grantee:  ITALCOM GROUP
Equipment Class: Digital Transmission System
Notes: Mobile LTE Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.09727  

Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for filings under this FCC ID. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device, including its antenna, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR in this frequency band for body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are: 0.11 W/kg, 1.36 W/kg, and 1.36 W/kg, respectively.



TCB Grant - Application 6izgnX+j6kQGOYCR0Jfc1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 04/08/2013

Application Dated: 04/08/2013
ITALCOM GROUP
1728 Coral Way, Coral Gables
Miami, FL 518048
 
Attention: Jorge Gilbert , Vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YPVMIFIAMR510
Name of Grantee:  ITALCOM GROUP
Equipment Class: PCS Licensed Transmitter
Notes: Mobile LTE Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.209 2.5  PM 4M17F9W
24E 1852.4  -  1907.6 0.261 2.5  PM 4M17F9W
27 1710.7  -  1754.3 0.516 2.5  PM 1M11G7D
27 1710.7  -  1754.3 0.516 2.5  PM 1M11D7W
27 1711.5  -  1753.5 0.482 2.5  PM 2M73G7D
27 1711.5  -  1753.5 0.493 2.5  PM 2M71D7W
27 1712.5  -  1752.5 0.42 2.5  PM 4M53G7D
27 1712.5  -  1752.5 0.43 2.5  PM 4M55D7W
27 1715.0  -  1750.0 0.383 2.5  PM 9M02G7D
27 1715.0  -  1750.0 0.374 2.5  PM 9M02D7W
27 1717.5  -  1747.5 0.366 2.5  PM 13M5G7D
27 1717.5  -  1747.5 0.374 2.5  PM 13M5D7W
27 1720.0  -  1745.0 0.326 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.333 2.5  PM 17M9D7W

Output power listed is ERP of Part 22H and EIRP for Part 24E and 27. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1.0 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.34 W/kg, 1.36 W/kg, and 1.36 W/kg, respectively. This device has integrated a DTS unlicensed transmitter certified under the same FCC ID.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application 6izgnX+j6kQGOYCR0Jfc1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ITALCOM GROUP
1728 Coral Way, Coral Gables
Miami, FL 518048
United States 		  Date of Grant: 04/08/2013

Application Dated: 04/08/2013
 
Attention: Jorge Gilbert , Vice president

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YPVMIFIAMR510
Name of Grantee:  ITALCOM GROUP
Equipment Class: PCS Licensed Transmitter
Notes: Mobile LTE Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.209 2.5  PM 4M17F9W
24E 1852.4  -  1907.6 0.261 2.5  PM 4M17F9W
27 1710.7  -  1754.3 0.516 2.5  PM 1M11G7D
27 1710.7  -  1754.3 0.516 2.5  PM 1M11D7W
27 1711.5  -  1753.5 0.482 2.5  PM 2M73G7D
27 1711.5  -  1753.5 0.493 2.5  PM 2M71D7W
27 1712.5  -  1752.5 0.42 2.5  PM 4M53G7D
27 1712.5  -  1752.5 0.43 2.5  PM 4M55D7W
27 1715.0  -  1750.0 0.383 2.5  PM 9M02G7D
27 1715.0  -  1750.0 0.374 2.5  PM 9M02D7W
27 1717.5  -  1747.5 0.366 2.5  PM 13M5G7D
27 1717.5  -  1747.5 0.374 2.5  PM 13M5D7W
27 1720.0  -  1745.0 0.326 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.333 2.5  PM 17M9D7W

Output power listed is ERP of Part 22H and EIRP for Part 24E and 27. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1.0 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 1.34 W/kg, 1.36 W/kg, and 1.36 W/kg, respectively. This device has integrated a DTS unlicensed transmitter certified under the same FCC ID.

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: