FCC ID YZP-AN2000

This device is to be used only for mobile and fixed application; and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance; and the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm.

OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

For mobile and fixed operating configurations, the antenna gain must not exceed following for satisfying RF exposure compliance.

LTE B48, NR n48: -2.11

Under no conditions may an antenna gain be used that would exceed the EIRP power limits as specified in Part 96.

This device has bandwidth mode LTE B48: 5/10/15/20 MHz and NR n48: 10/15/20/30/40 MHz.

This device is to be used only for mobile and fixed application; and co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance; and the module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm.

OEM integrators must ensure that the end user has no manual instructions to remove or install this module. The Grantee is responsible for providing the documentation required for modular use. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

For mobile and fixed operating configurations, the antenna gain must not exceed following for satisfying RF exposure compliance.

WCDMA B5, LTE B5/B26, NR n5/n26: 0.60 dBi, WCDMA B2, LTE B2/B25, NR n2/n25: 0.46 dBi, WCDMA B4, LTE B4/B66, NR n66: -0.37 dBi, LTE B7, NR n7: 0.22 dBi, LTE B12/B17, NR n12: -4.13 dBi, LTE B13: -1.27 dBi, LTE B14: 0.13 dBi, LTE B41, NR n41: 0.34 dBi, LTE B71, NR n71: -7.25 dBi, NR n77/n78(Low Band): -2.07 dBi, NR n77/n78(High Band): -2.44 dBi.

Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24, 27 and 90.

This device has bandwidth mode LTE B2/B4/B25/B66: 1.4/3/5/10/15/20 MHz, LTE B26: 1.4/3/5/10/15 MHz, LTE B5/B12: 1.4/3/5/10 MHz, LTE B13/B14/B17: 5/10 MHz, LTE B7/B41/B71: 5/10/15/20 MHz.

This device has bandwidth mode NR n2/n25/n66: 5/10/15/20/25/30/35/40/45 MHz, NR n5/n26(Part 22): 5/10/15/20/25 MHz, NR n7: 5/10/15/20/25/30/35/40 MHz, NR n12: 5/10/15 MHz, NR n26(Part 90): 5/10 MHz, NR n71: 5/10/15/20 MHz, NR n41: 10/15/20/25/30/35/40/45/50/60/70/80/90/100 MHz, NR n77/n78: 10/15/20/25/30/40/50/60/70/80/90/100 MHz.