1. FCC ID
  2. ZMO
  3. ZMONL952NA

FCC ID ZMONL952NA

LTE Module

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: NL952NA
Latest application date: 2020-10-06

FCC ID Device Details

FCC IDZMONL952NA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeNL952NA
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com
Equipment ClassLTE Module
Test FirmSGS-CSTC Standards Technical Services Co., Ltd

Additional Linked Details

ManufacturerFibocom Wireless Inc.
Device NameFibocom
Model NumberNL952-NA
Certification Date2020-10-06
Manufacturer Website www.fibocom.com
Device TypeWireless Module
5G Certified❌

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
670.5-690.5 MHzOriginal Equipment2020-10-06
3557.5-3692.5 MHzOriginal Equipment2020-10-06

Exhibits

DocumentTypeAvailableFile
Hardware User ManualUsers Manual2020-11-20PDF 2.6 MB
User ManualUsers Manual2020-11-20PDF 2.6 MB
Internal PhotosInternal Photos2020-10-06PDF 566.9 KB
External PhotosExternal Photos2020-10-06PDF 355.4 KB
Label & Label LocationID Label/Location Info2020-10-06PDF 42.3 KB
Test Setup PhotosTest Setup Photos2020-10-06PDF 3.7 MB
Test Setup Photos rev1Test Setup Photos2020-10-06PDF 810.8 KB
Appendix LTE Band 12 rev1Test Report2020-10-06PDF 3.9 MB
Appendix LTE Band 13 rev1Test Report2020-10-06PDF 3.2 MB
Appendix LTE Band 14 rev1Test Report2020-10-06PDF 4.5 MB
Appendix LTE Band 17 rev1Test Report2020-10-06PDF 3.1 MB
Appendix LTE Band 2 rev1Test Report2020-10-06PDF 5.2 MB
Appendix LTE Band 25 rev1Test Report2020-10-06PDF 5.2 MB
Appendix LTE Band 26 (814-824) rev1Test Report2020-10-06PDF 3.8 MB
Appendix LTE Band 26 (824-849) rev1Test Report2020-10-06PDF 4.6 MB
Appendix LTE Band 30 rev1Test Report2020-10-06PDF 3.2 MB
Appendix LTE Band 4 rev1Test Report2020-10-06PDF 5.2 MB
Appendix LTE Band 41 rev1Test Report2020-10-06PDF 4.4 MB
Appendix LTE Band 48 rev1Test Report2020-10-06PDF 5.7 MB
Appendix LTE Band 5 rev1Test Report2020-10-06PDF 3.9 MB
Appendix LTE Band 66 rev1Test Report2020-10-06PDF 5.2 MB
Appendix LTE Band 7 rev1Test Report2020-10-06PDF 4.3 MB
Appendix LTE Band 71 rev1Test Report2020-10-06PDF 3.9 MB
Appendix LTE CA 13A-66A rev1Test Report2020-10-06PDF 3.3 MB
Appendix LTE CA 2A_12A rev1Test Report2020-10-06PDF 5.1 MB
Appendix LTE CA 2A_13A rev1Test Report2020-10-06PDF 5.1 MB
Appendix LTE CA 2A_4A rev1Test Report2020-10-06PDF 5 MB
Appendix LTE CA 2A_66A rev1Test Report2020-10-06PDF 5.1 MB
Appendix LTE CA 4A-12A rev1Test Report2020-10-06PDF 4.9 MB
Appendix LTE CA 4A-13A rev1Test Report2020-10-06PDF 3.2 MB
Appendix LTE CA 4A-5A rev1Test Report2020-10-06PDF 5 MB
Appendix LTE CA 5B rev1Test Report2020-10-06PDF 4.8 MB
Appendix LTE CA 66C_1 rev1Test Report2020-10-06PDF 3.7 MB
Appendix LTE CA 66C_2 rev1Test Report2020-10-06PDF 3.1 MB
Appendix WCDMA rev1Test Report2020-10-06PDF 2.8 MB
RF Test Report REV1Test Report2020-10-06PDF 1 MB
RF Test Report rev1Test Report2020-10-06PDF 1 MB
TR App B.1 WCDMA Band II,IV,VTest Report2020-10-06PDF 2.2 MB
TR App B.10 LTE Band 25Test Report2020-10-06PDF 5.8 MB
TR App B.11 LTE Band 26(814-824)Test Report2020-10-06PDF 4.4 MB
TR App B.12 LTE Band 26(824-849)Test Report2020-10-06PDF 5 MB
TR App B.13 LTE Band 30Test Report2020-10-06PDF 2.1 MB
TR App B.14 LTE Band 41Test Report2020-10-06PDF 4.6 MB
TR App B.15 LTE Band 48Test Report2020-10-06PDF 5.7 MB
TR App B.16 LTE Band 66Test Report2020-10-06PDF 5.8 MB
TR App B.17 LTE Band 71Test Report2020-10-06PDF 4.4 MB
TR App B.18 LTE CA 5BTest Report2020-10-06PDF 5.1 MB
TR App B.19 LTE CA 66CTest Report2020-10-06PDF 5.2 MB
TR App B.2 LTE Band 2Test Report2020-10-06PDF 5.8 MB
TR App B.20 LTE CA 2A-4ATest Report2020-10-06PDF 3.1 MB
TR App B.21 LTE CA 2A-12ATest Report2020-10-06PDF 3.1 MB
TR App B.22 LTE CA 2A-13ATest Report2020-10-06PDF 3 MB
TR App B.23 LTE CA 2A-66ATest Report2020-10-06PDF 3.1 MB
TR App B.24 LTE CA 4A-5ATest Report2020-10-06PDF 3.1 MB
TR App B.25 LTE CA 4A-12A Metadata onlyTest Report2020-10-06PDF 3.1 MB
TR App B.26 LTE CA 4A-13ATest Report2020-10-06PDF 3.9 MB
TR App B.27 LTE CA 13A-66ATest Report2020-10-06PDF 4.9 MB
TR App B.3 LTE Band 4Test Report2020-10-06PDF 5.8 MB
TR App B.4 LTE Band 5Test Report2020-10-06PDF 4.4 MB
TR App B.5 LTE Band 7Test Report2020-10-06PDF 4.6 MB
TR App B.6 LTE Band 12Test Report2020-10-06PDF 4.4 MB
TR App B.7 LTE Band 13Test Report2020-10-06PDF 3.1 MB
TR App B.8 LTE Band 14Test Report2020-10-06PDF 2.9 MB
TR App B.9 LTE Band 17Test Report2020-10-06PDF 3.4 MB
Test Report RFTest Report2020-10-06PDF 889.1 KB
Amendment LetterCover Letter(s)2020-10-06PDF 76.9 KB
Confidentiality Request LetterCover Letter(s)2020-10-06PDF 45.6 KB
Declaration of AuthorizationCover Letter(s)2020-10-06PDF 34.3 KB
Modular Approval RequestCover Letter(s)2020-10-06PDF 97 KB
Statement LetterCover Letter(s)2020-10-06PDF 21.4 KB
MPE ReportRF Exposure Info2020-10-06PDF 338.7 KB
Tune Up ProcedureParts List/Tune Up Info2020-10-06PDF 119 KB
Block Diagram Metadata onlyBlock DiagramPDF 939.3 KB
Schematics Metadata onlySchematicsPDF 366.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 271.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 274.2 KB

Application Information

Application IDaJRXJAa4NKTvV6lK3/w7cw==
Final Action Date2020-10-06
Application PurposeOriginal Equipment
Applicant FRN0020891057
ModelNL952NA
Frequency Range670.5-690.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE Module
Responsible PartyLucy Liu, Certification Manager, lucy.liu@fibocom.com , +8675526733555
Test FirmDerek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/20/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4, 25 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12 and 26; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 7, 41 and 71; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13, 14, 17, 30; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for LTE Band 26; This device supports intra-band carrier aggregation techniques for LTE Band 5 and 66; inter-band carrier aggregation techniques for LTE Bands 2 and 7, LTE Bands 2 and 12, LTE Bands 2 and 13, LTE Bands 2 and 66, LTE Bands 4 and 5, LTE Bands 4 and 12, LTE Bands 4 and 13, and LTE Bands 13 and 66. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Applications

Application IDDatePurpose
aJRXJAa4NKTvV6lK3/w7cw==2020-10-06Original Equipment
9W96ZSD4TFSUDAHK3UMgnQ==2020-10-06Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
670.5-690.5 MHz0.2240.1ppm13M5G7D27
670.5-690.5 MHz0.2060.1ppm13M5W7D27
673-688 MHz0.2220.1ppm17M9G7D27
673-688 MHz0.2050.1ppm17M9W7D27
700.5-714.5 MHz0.2110.1ppm2M69W7D27
704-711 MHz0.2340.1ppm8M97G7D27
704-711 MHz0.2060.1ppm8M95W7D27
706.5-713.5 MHz0.2140.1ppm4M48G7D27
709-711 MHz0.2140.1ppm8M91G7D27
709-711 MHz0.2020.1ppm8M91W7D27
782 MHz0.2120.1ppm8M91G7D27
782 MHz0.180.1ppm8M93W7D27
790.5-795.5 MHz0.1780.1ppm4M49W7D9
793 MHz0.2110.1ppm8M93G7D9
793 MHz0.1730.1ppm8M91W7D9
815.5-822.5 MHz0.2230.1ppm2M70G7D9
815.5-822.5 MHz0.2020.1ppm2M69W7D9
819 MHz0.2220.1ppm8M93G7D9
819 MHz0.2010.1ppm8M93W7D9
825.5-847.5 MHz0.2080.1ppm2M69W7D22H
826.5-846.5 MHz0.2240.1ppm2M70G7D22H
826.8-846.2 MHz0.2420.1ppm13M9G7D22H
826.8-846.2 MHz0.2130.1ppm13M9W7D22H
829-844 MHz0.2290.1ppm8M95G7D22H
829-844 MHz0.2070.1ppm8M97W7D22H
829-844 MHz0.2270.1ppm18M9G7D22H
829-844 MHz0.1990.1ppm18M9W7D22H
831.5-841.5 MHz0.2220.1ppm13M5G7D9
831.5-841.5 MHz0.1970.1ppm13M5W7D9
1717.5-1772.5 MHz0.2060.1ppm13M5W7D27
1717.5-1747.5 MHz0.2070.1ppm13M5W7D27
1717.8-1772.2 MHz0.2360.1ppm32M8G7D27
1717.8-1772.2 MHz0.1870.1ppm32M7W7D27
1720-1770 MHz0.2310.1ppm17M9G7D27
1720-1770 MHz0.2030.1ppm17M9W7D27
1720-1770 MHz0.2310.1ppm37M6G7D27
1720-1770 MHz0.1740.1ppm37M6W7D27
1720-1745 MHz0.2260.1ppm17M9G7D27
1720-1745 MHz0.2050.1ppm17M9W7D27
1857.5-1907.5 MHz0.1950.1ppm13M5W7D24E
1857.5-1902.5 MHz0.2160.1ppm13M5G7D24E
1860-1905 MHz0.2170.1ppm17M9G7D24E
1860-1905 MHz0.1940.1ppm17M9W7D24E
2310 MHz0.1720.1ppm8M93G7D27
2310 MHz0.1450.1ppm8M95W7D27
2505-2565 MHz0.190.1ppm8M95W7D27
2506-2680 MHz0.2160.1ppm17M9G7D27
2506-2680 MHz0.210.1ppm17M9W7D27
2507.5-2562.5 MHz0.1930.1ppm13M5G7D27
2510-2560 MHz0.2150.1ppm17M9G7D27
2510-2560 MHz0.1870.1ppm17M9W7D27
3557.5-3692.5 MHz0.1550.1ppm13M5W7D96
3560-3690 MHz0.1750.1ppm17M9G7D96
3560-3690 MHz0.1510.1ppm17M9W7D96

Grants

TCB Grant - Application aJRXJAa4NKTvV6lK3/w7cw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 10/06/2020

Application Dated: 10/05/2020
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL952NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.237 0.1  PM 4M15F9W
27 1712.4  -  1752.6 0.291 0.1  PM 4M16F9W
22H 826.4  -  846.6 0.246 0.1  PM 4M14F9W
24E 1860.0  -  1900.0 0.215 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.193 0.1  PM 17M9W7D
24E 1857.5  -  1902.5 0.216 0.1  PM 13M5G7D
27 1720.0  -  1745.0 0.226 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.205 0.1  PM 17M9W7D
27 1717.5  -  1747.5 0.207 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.229 0.1  PM 8M95G7D
22H 829.0  -  844.0 0.207 0.1  PM 8M97W7D
22H 826.5  -  846.5 0.224 0.1  PM 2M70G7D
22H 825.5  -  847.5 0.208 0.1  PM 2M69W7D
27 2510.0  -  2560.0 0.215 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.187 0.1  PM 17M9W7D
27 2507.5  -  2562.5 0.193 0.1  PM 13M5G7D
27 2505.0  -  2565.0 0.19 0.1  PM 8M95W7D
27 704.0  -  711.0 0.234 0.1  PM 8M97G7D
27 704.0  -  711.0 0.206 0.1  PM 8M95W7D
27 700.5  -  714.5 0.211 0.1  PM 2M69W7D
27 782.0  -  782.0 0.212 0.1  PM 8M91G7D
27 782.0  -  782.0 0.18 0.1  PM 8M93W7D
90 793.0  -  793.0 0.211 0.1  PM 8M93G7D
90 793.0  -  793.0 0.173 0.1  PM 8M91W7D
90 790.5  -  795.5 0.178 0.1  PM 4M49W7D
27 709.0  -  711.0 0.214 0.1  PM 8M91G7D
27 709.0  -  711.0 0.202 0.1  PM 8M91W7D
27 706.5  -  713.5 0.214 0.1  PM 4M48G7D
24E 1860.0  -  1905.0 0.217 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.194 0.1  PM 17M9W7D
24E 1857.5  -  1907.5 0.195 0.1  PM 13M5W7D
90 819.0  -  819.0 0.222 0.1  PM 8M93G7D
90 819.0  -  819.0 0.201 0.1  PM 8M93W7D
90 815.5  -  822.5 0.223 0.1  PM 2M70G7D
90 815.5  -  822.5 0.202 0.1  PM 2M69W7D
90 831.5  -  841.5 0.222 0.1  PM 13M5G7D
90 831.5  -  841.5 0.197 0.1  PM 13M5W7D
27 2310.0  -  2310.0 0.172 0.1  PM 8M93G7D
27 2310.0  -  2310.0 0.145 0.1  PM 8M95W7D
27 2506.0  -  2680.0 0.216 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.21 0.1  PM 17M9W7D
27 1720.0  -  1770.0 0.231 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.203 0.1  PM 17M9W7D
27 1717.5  -  1772.5 0.206 0.1  PM 13M5W7D
27 673.0  -  688.0 0.222 0.1  PM 17M9G7D
27 673.0  -  688.0 0.205 0.1  PM 17M9W7D
27 670.5  -  690.5 0.224 0.1  PM 13M5G7D
27 670.5  -  690.5 0.206 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.227 0.1  PM 18M9G7D
22H 829.0  -  844.0 0.199 0.1  PM 18M9W7D
22H 826.8  -  846.2 0.242 0.1  PM 13M9G7D
22H 826.8  -  846.2 0.213 0.1  PM 13M9W7D
27 1720.0  -  1770.0 0.231 0.1  PM 37M6G7D
27 1720.0  -  1770.0 0.174 0.1  PM 37M6W7D
27 1717.8  -  1772.2 0.236 0.1  PM 32M8G7D
27 1717.8  -  1772.2 0.187 0.1  PM 32M7W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4, 25 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12 and 26; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 7, 41 and 71; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13, 14, 17, 30; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for LTE Band 26; This device supports intra-band carrier aggregation techniques for LTE Band 5 and 66; inter-band carrier aggregation techniques for LTE Bands 2 and 7, LTE Bands 2 and 12, LTE Bands 2 and 13, LTE Bands 2 and 66, LTE Bands 4 and 5, LTE Bands 4 and 12, LTE Bands 4 and 13, and LTE Bands 13 and 66. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.


EAS Grant - Application aJRXJAa4NKTvV6lK3/w7cw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 10/06/2020

Application Dated: 10/05/2020
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL952NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.237 0.1  PM 4M15F9W
27 1712.4  -  1752.6 0.291 0.1  PM 4M16F9W
22H 826.4  -  846.6 0.246 0.1  PM 4M14F9W
24E 1860.0  -  1900.0 0.215 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.193 0.1  PM 17M9W7D
24E 1857.5  -  1902.5 0.216 0.1  PM 13M5G7D
27 1720.0  -  1745.0 0.226 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.205 0.1  PM 17M9W7D
27 1717.5  -  1747.5 0.207 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.229 0.1  PM 8M95G7D
22H 829.0  -  844.0 0.207 0.1  PM 8M97W7D
22H 826.5  -  846.5 0.224 0.1  PM 2M70G7D
22H 825.5  -  847.5 0.208 0.1  PM 2M69W7D
27 2510.0  -  2560.0 0.215 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.187 0.1  PM 17M9W7D
27 2507.5  -  2562.5 0.193 0.1  PM 13M5G7D
27 2505.0  -  2565.0 0.19 0.1  PM 8M95W7D
27 704.0  -  711.0 0.234 0.1  PM 8M97G7D
27 704.0  -  711.0 0.206 0.1  PM 8M95W7D
27 700.5  -  714.5 0.211 0.1  PM 2M69W7D
27 782.0  -  782.0 0.212 0.1  PM 8M91G7D
27 782.0  -  782.0 0.18 0.1  PM 8M93W7D
90 793.0  -  793.0 0.211 0.1  PM 8M93G7D
90 793.0  -  793.0 0.173 0.1  PM 8M91W7D
90 790.5  -  795.5 0.178 0.1  PM 4M49W7D
27 709.0  -  711.0 0.214 0.1  PM 8M91G7D
27 709.0  -  711.0 0.202 0.1  PM 8M91W7D
27 706.5  -  713.5 0.214 0.1  PM 4M48G7D
24E 1860.0  -  1905.0 0.217 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.194 0.1  PM 17M9W7D
24E 1857.5  -  1907.5 0.195 0.1  PM 13M5W7D
90 819.0  -  819.0 0.222 0.1  PM 8M93G7D
90 819.0  -  819.0 0.201 0.1  PM 8M93W7D
90 815.5  -  822.5 0.223 0.1  PM 2M70G7D
90 815.5  -  822.5 0.202 0.1  PM 2M69W7D
90 831.5  -  841.5 0.222 0.1  PM 13M5G7D
90 831.5  -  841.5 0.197 0.1  PM 13M5W7D
27 2310.0  -  2310.0 0.172 0.1  PM 8M93G7D
27 2310.0  -  2310.0 0.145 0.1  PM 8M95W7D
27 2506.0  -  2680.0 0.216 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.21 0.1  PM 17M9W7D
27 1720.0  -  1770.0 0.231 0.1  PM 17M9G7D
27 1720.0  -  1770.0 0.203 0.1  PM 17M9W7D
27 1717.5  -  1772.5 0.206 0.1  PM 13M5W7D
27 673.0  -  688.0 0.222 0.1  PM 17M9G7D
27 673.0  -  688.0 0.205 0.1  PM 17M9W7D
27 670.5  -  690.5 0.224 0.1  PM 13M5G7D
27 670.5  -  690.5 0.206 0.1  PM 13M5W7D
22H 829.0  -  844.0 0.227 0.1  PM 18M9G7D
22H 829.0  -  844.0 0.199 0.1  PM 18M9W7D
22H 826.8  -  846.2 0.242 0.1  PM 13M9G7D
22H 826.8  -  846.2 0.213 0.1  PM 13M9W7D
27 1720.0  -  1770.0 0.231 0.1  PM 37M6G7D
27 1720.0  -  1770.0 0.174 0.1  PM 37M6W7D
27 1717.8  -  1772.2 0.236 0.1  PM 32M8G7D
27 1717.8  -  1772.2 0.187 0.1  PM 32M7W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4, 25 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12 and 26; LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 7, 41 and 71; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13, 14, 17, 30; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for LTE Band 26; This device supports intra-band carrier aggregation techniques for LTE Band 5 and 66; inter-band carrier aggregation techniques for LTE Bands 2 and 7, LTE Bands 2 and 12, LTE Bands 2 and 13, LTE Bands 2 and 66, LTE Bands 4 and 5, LTE Bands 4 and 12, LTE Bands 4 and 13, and LTE Bands 13 and 66. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



TCB Grant - Application 9W96ZSD4TFSUDAHK3UMgnQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 10/06/2020

Application Dated: 10/06/2020
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL952NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Citizens Band End User Devices
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
96 3560.0  -  3690.0 0.175 0.1  PM 17M9G7D
96 3560.0  -  3690.0 0.151 0.1  PM 17M9W7D
96 3557.5  -  3692.5 0.155 0.1  PM 13M5W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 48.


EAS Grant - Application 9W96ZSD4TFSUDAHK3UMgnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 10/06/2020

Application Dated: 10/06/2020
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL952NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Citizens Band End User Devices
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
96 3560.0  -  3690.0 0.175 0.1  PM 17M9G7D
96 3560.0  -  3690.0 0.151 0.1  PM 17M9W7D
96 3557.5  -  3692.5 0.155 0.1  PM 13M5W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This device supports: LTE of 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 48.



Mail To: