FCC ID ZMOSC228GL
LTE Module
by Fibocom Wireless Inc.
Grantee Code: ZMO Product Code: SC228GL
Latest application date: 2024-10-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-10-12 |
| 5180-5240 MHz | Original Equipment | 2024-10-12 |
| 2402-2480 MHz | Original Equipment | 2024-10-12 |
| 665.5-695.5 MHz | Original Equipment | 2024-10-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2024-10-12 | PDF 803.6 KB |
| internal photos | Internal Photos | 2024-10-12 | PDF 853.8 KB |
| external Photos | External Photos | 2024-10-12 | PDF 1.5 MB |
| label | ID Label/Location Info | 2024-10-12 | PDF 243.2 KB |
| test setup photos | Test Setup Photos | 2024-10-12 | PDF 1.2 MB |
| BLE test report | Test Report | 2024-10-12 | PDF 3.2 MB |
| DFS test report | Test Report | 2024-10-12 | PDF 1.7 MB |
| Part 22 test report_01 | Test Report | 2024-10-12 | PDF 4.4 MB |
| Part 22 test report_02 | Test Report | 2024-10-12 | PDF 5.3 MB |
| Part 22 test report_03 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 22 test report_04 | Test Report | 2024-10-12 | PDF 4 MB |
| Part 24 test report_01 | Test Report | 2024-10-12 | PDF 4.5 MB |
| Part 24 test report_02 | Test Report | 2024-10-12 | PDF 5.4 MB |
| Part 24 test report_03 | Test Report | 2024-10-12 | PDF 5.2 MB |
| Part 24 test report_04 | Test Report | 2024-10-12 | PDF 5.2 MB |
| Part 24 test report_05 | Test Report | 2024-10-12 | PDF 3.6 MB |
| Part 27 test report_01 | Test Report | 2024-10-12 | PDF 5.2 MB |
| Part 27 test report_02 | Test Report | 2024-10-12 | PDF 5.3 MB |
| Part 27 test report_03 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 27 test report_04 | Test Report | 2024-10-12 | PDF 5.4 MB |
| Part 27 test report_05 | Test Report | 2024-10-12 | PDF 5.3 MB |
| Part 27 test report_06 | Test Report | 2024-10-12 | PDF 5.4 MB |
| Part 27 test report_07 | Test Report | 2024-10-12 | PDF 5.3 MB |
| Part 27 test report_08 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 27 test report_09 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 27 test report_10 | Test Report | 2024-10-12 | PDF 5.2 MB |
| Part 27 test report_11 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 27 test report_12 | Test Report | 2024-10-12 | PDF 1.9 MB |
| Part 90 LTE Band 14 test report | Test Report | 2024-10-12 | PDF 4.6 MB |
| Part 90 LTE Band 26 test report_01 | Test Report | 2024-10-12 | PDF 5 MB |
| Part 90 LTE Band 26 test report_02 | Test Report | 2024-10-12 | PDF 2.3 MB |
| WIFI 2.4G test report_part1 | Test Report | 2024-10-12 | PDF 4.9 MB |
| WIFI 2.4G test report_part2 | Test Report | 2024-10-12 | PDF 1.5 MB |
| WIFI 5G test report_part1 | Test Report | 2024-10-12 | PDF 4.7 MB |
| WIFI 5G test report_part2 | Test Report | 2024-10-12 | PDF 4 MB |
| antenna specification | Test Report | 2024-10-12 | PDF 2.2 MB |
| test report | Test Report | 2024-10-12 | PDF 5 MB |
| Attestation Section 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-10-12 | PDF 160.2 KB |
| US Agent letter | Attestation Statements | 2024-10-12 | PDF 300.9 KB |
| Ad Hoc Mode Declaration Letter | Cover Letter(s) | 2024-10-12 | PDF 87.9 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2024-10-12 | PDF 105 KB |
| POA letter | Cover Letter(s) | 2024-10-12 | PDF 95 KB |
| Wi-Fi Channel 12 and 13 Declaration Letter | Cover Letter(s) | 2024-10-12 | PDF 87.2 KB |
| confidentiality letter | Cover Letter(s) | 2024-10-12 | PDF 87.4 KB |
| RF exposure report | RF Exposure Info | 2024-10-12 | PDF 211.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 1.8 MB | |
| Schematics Metadata only | Schematics | PDF 1 MB | |
| Operational Description Metadata only | Operational Description | PDF 466.4 KB | |
| Operation Description for software security Metadata only | SDR Software/Security Info. | PDF 145.7 KB | |
| BOM list Metadata only | Parts List/Tune Up Info | PDF 131.7 KB | |
| tune-up procedure Metadata only | Parts List/Tune Up Info | PDF 147 KB |
Application Information
| Application ID | ro0cfhdimZ3dL8A2f94HDw== |
|---|---|
| Final Action Date | 2024-10-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0020891057 |
| Model | SC228GL |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LTE Module |
| Responsible Party | Patrick Ma, Certification Director, mapx@fibocom.com  , +8675526733555 |
| Test Firm | Sophia Huang, BTL Inc., Sophia.huang@newbtl.com  , +86-769-83183000 |
| TCB Email | TEI@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ro0cfhdimZ3dL8A2f94HDw== | 2024-10-12 | Original Equipment |
| pZ/OGdDANVVGkLh6RRHAGA== | 2024-10-12 | Original Equipment |
| han307j60BZG12bxHixbVg== | 2024-10-12 | Original Equipment |
| 7jHjd3qpjtcCYR0VCgLjmg== | 2024-10-12 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 665.5-695.5 MHz | 0.16 | 2.5ppm | 4M50W7D | 27 | |
| 668-693 MHz | 0.1927 | 2.5ppm | 8M99G7D | 27 | |
| 673-688 MHz | 0.1714 | 2.5ppm | 17M9G7D | 27 | |
| 673-688 MHz | 0.1596 | 2.5ppm | 17M9W7D | 27 | |
| 704-711 MHz | 0.1849 | 2.5ppm | 9M01G7D | 27 | |
| 704-711 MHz | 0.1563 | 2.5ppm | 8M99W7D | 27 | |
| 709-711 MHz | 0.1766 | 2.5ppm | 9M01G7D | 27 | |
| 709-711 MHz | 0.1542 | 2.5ppm | 9M99W7D | 27 | |
| 779.5-784.5 MHz | 0.1679 | 2.5ppm | 4M50W7D | 27 | |
| 782 MHz | 0.1923 | 2.5ppm | 8M95G7D | 27 | |
| 782 MHz | 0.1489 | 2.5ppm | 8M96W7D | 27 | |
| 790.5-795.5 MHz | 0.1714 | 2.5ppm | 4M51G7D | 9 | |
| 790.5-795.5 MHz | 0.1883 | 2.5ppm | 4M49W7D | 9 | |
| 793 MHz | 0.2104 | 2.5ppm | 8M94G7D | 9 | |
| 793 MHz | 0.2158 | 2.5ppm | 8M97W7D | 9 | |
| 815.5-822.5 MHz | 0.1552 | 2.5ppm | 2M70W7D | 9 | |
| 816.5-821.5 MHz | 0.175 | 2.5ppm | 4M51G7D | 9 | |
| 819 MHz | 0.1722 | 2.5ppm | 8M96G7D | 9 | |
| 819 MHz | 0.1374 | 2.5ppm | 8M96W7D | 9 | |
| 831.5-841.5 MHz | 0.1954 | 2.5ppm | 13M5G7D | 22 | |
| 831.5-841.5 MHz | 0.1718 | 2.5ppm | 13M5W7D | 22 | |
| 1712.4-1752.6 MHz | 0.4864 | 2.5ppm | 4M13F9W | 27 | |
| 1715-1750 MHz | 0.4864 | 2.5ppm | 13M5G7D | 27 | |
| 1715-1750 MHz | 0.4864 | 2.5ppm | 13M5W7D | 27 | |
| 1715-1775 MHz | 0.4416 | 2.5ppm | 8M98G7D | 27 | |
| 1715-1775 MHz | 0.3741 | 2.5ppm | 8M98W7D | 27 | |
| 1720-1740 MHz | 0.4064 | 2.5ppm | 17M9G7D | 27 | |
| 1720-1740 MHz | 0.4395 | 2.5ppm | 17M9W7D | 27 | |
| 1720-1770 MHz | 0.4207 | 2.5ppm | 17M9G7D | 27 | |
| 1720-1770 MHz | 0.3673 | 2.5ppm | 17M9W7D | 27 | |
| 1850.2-1909.8 MHz | 1.3305 | 2.5ppm | 245KGXW | 24E | |
| 1851.5-1908.5 MHz | 0.3214 | 2.5ppm | 17M9W7D | 24E | |
| 1852.4-1907.6 MHz | 0.5188 | 2.5ppm | 4M15F9W | 24E | |
| 1852.5-1907.5 MHz | 0.3811 | 2.5ppm | 4M52G7D | 24E | |
| 1852.5-1907.5 MHz | 0.3499 | 2.5ppm | 17M9G7D | 24E | |
| 1852.5-1912.5 MHz | 0.2296 | 2.5ppm | 4M52G7D | 24E | |
| 1860-1900 MHz | 0.3664 | 2.5ppm | 2M71W7D | 24E | |
| 1860-1905 MHz | 0.2099 | 2.5ppm | 18M0G7D | 24E | |
| 1860-1905 MHz | 0.1064 | 2.5ppm | 17M9W7D | 24E | |
| 2402-2480 MHz | 0.0095 | 15C | CC | ||
| 2402-2480 MHz | 0.0075000 | 15C | CC | ||
| 2412-2462 MHz | 0.0522 | 15C | CC | ||
| 2506-2680 MHz | 0.4188 | 2.5ppm | 17M9G7D | 27 | |
| 2506-2680 MHz | 0.3707 | 2.5ppm | 17M9W7D | 27 | |
| 2510-2560 MHz | 0.369 | 2.5ppm | 18M0G7D | 27 | |
| 2510-2560 MHz | 0.3133 | 2.5ppm | 17M9W7D | 27 | |
| 2577.5-2612.5 MHz | 0.3597 | 2.5ppm | 13M4G7D | 27 | |
| 2577.5-2612.5 MHz | 0.3076 | 2.5ppm | 13M5W7D | 27 | |
| 2580-2610 MHz | 0.3467 | 2.5ppm | 17M9G7D | 27 | |
| 2580-2610 MHz | 0.2985 | 2.5ppm | 18M0W7D | 27 | |
| 5180-5240 MHz | 0.0448 | 15E | CC | ||
| 5260-5320 MHz | 0.0437 | 15E | CC | ||
| 5500-5700 MHz | 0.0456 | 15E | CC | ||
| 5745-5825 MHz | 0.0425 | 15E | CC |
Grants
TCB Grant - Application ro0cfhdimZ3dL8A2f94HDw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Fibocom Wireless Inc. |
| 1101,Tower A, Building 6, Shenzhen International |
| Innovation Valley, Dashi 1st Rd, Nanshan |
| ShenZhen, China |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0095 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0522 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ro0cfhdimZ3dL8A2f94HDw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan ShenZhen, China |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0095 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0522 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Fibocom Wireless Inc. |
| 1101,Tower A, Building 6, Shenzhen International |
| Innovation Valley, Dashi 1st Rd, Nanshan |
| ShenZhen, China |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0448 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0437 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0456 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0425 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pZ/OGdDANVVGkLh6RRHAGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan ShenZhen, China |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0448 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0437 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0456 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0425 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Fibocom Wireless Inc. |
| 1101,Tower A, Building 6, Shenzhen International |
| Innovation Valley, Dashi 1st Rd, Nanshan |
| ShenZhen, China |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0075 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application han307j60BZG12bxHixbVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan ShenZhen, China |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0075 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Fibocom Wireless Inc. |
| 1101,Tower A, Building 6, Shenzhen International |
| Innovation Valley, Dashi 1st Rd, Nanshan |
| ShenZhen, China |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22 | 824.2 - 848.8 | 1.1858 | 2.5 PM | 245KGXW | |
| 22 | 826.4 - 846.6 | 0.1778 | 2.5 PM | 4M14F9W | |
| 22 | 824.7 - 848.3 | 0.1563 | 2.5 PM | 4M52W7D | |
| 22 | 829.0 - 844.0 | 0.182 | 2.5 PM | 8M99G7D | |
| 22 | 829.0 - 844.0 | 0.1556 | 2.5 PM | 8M98W7D | |
| 22 | 831.5 - 841.5 | 0.1954 | 2.5 PM | 13M5G7D | |
| 22 | 831.5 - 841.5 | 0.1718 | 2.5 PM | 13M5W7D | |
| 24E | 1850.2 - 1909.8 | 1.3305 | 2.5 PM | 245KGXW | |
| 24E | 1852.4 - 1907.6 | 0.5188 | 2.5 PM | 4M15F9W | |
| 24E | 1852.5 - 1907.5 | 0.3811 | 2.5 PM | 4M52G7D | |
| 24E | 1860.0 - 1900.0 | 0.3664 | 2.5 PM | 2M71W7D | |
| 24E | 1852.5 - 1907.5 | 0.3499 | 2.5 PM | 17M9G7D | |
| 24E | 1851.5 - 1908.5 | 0.3214 | 2.5 PM | 17M9W7D | |
| 24E | 1852.5 - 1912.5 | 0.2296 | 2.5 PM | 4M52G7D | |
| 24E | 1860.0 - 1905.0 | 0.2099 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1905.0 | 0.1064 | 2.5 PM | 17M9W7D | |
| 27 | 1712.4 - 1752.6 | 0.4864 | 2.5 PM | 4M13F9W | |
| 27 | 1715.0 - 1750.0 | 0.4864 | 2.5 PM | 13M5G7D | |
| 27 | 1715.0 - 1750.0 | 0.4864 | 2.5 PM | 13M5W7D | |
| 27 | 1720.0 - 1740.0 | 0.4064 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1740.0 | 0.4395 | 2.5 PM | 17M9W7D | |
| 27 | 2510.0 - 2560.0 | 0.369 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.3133 | 2.5 PM | 17M9W7D | |
| 27 | 704.0 - 711.0 | 0.1849 | 2.5 PM | 9M01G7D | |
| 27 | 704.0 - 711.0 | 0.1563 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.1679 | 2.5 PM | 4M50W7D | |
| 27 | 782.0 - 782.0 | 0.1923 | 2.5 PM | 8M95G7D | |
| 27 | 782.0 - 782.0 | 0.1489 | 2.5 PM | 8M96W7D | |
| 27 | 709.0 - 711.0 | 0.1766 | 2.5 PM | 9M01G7D | |
| 27 | 709.0 - 711.0 | 0.1542 | 2.5 PM | 9M99W7D | |
| 27 | 2577.5 - 2612.5 | 0.3597 | 2.5 PM | 13M4G7D | |
| 27 | 2577.5 - 2612.5 | 0.3076 | 2.5 PM | 13M5W7D | |
| 27 | 2580.0 - 2610.0 | 0.3467 | 2.5 PM | 17M9G7D | |
| 27 | 2580.0 - 2610.0 | 0.2985 | 2.5 PM | 18M0W7D | |
| 27 | 2506.0 - 2680.0 | 0.4188 | 2.5 PM | 17M9G7D | |
| 27 | 2506.0 - 2680.0 | 0.3707 | 2.5 PM | 17M9W7D | |
| 27 | 1715.0 - 1775.0 | 0.4416 | 2.5 PM | 8M98G7D | |
| 27 | 1715.0 - 1775.0 | 0.3741 | 2.5 PM | 8M98W7D | |
| 27 | 1720.0 - 1770.0 | 0.4207 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.3673 | 2.5 PM | 17M9W7D | |
| 27 | 668.0 - 693.0 | 0.1927 | 2.5 PM | 8M99G7D | |
| 27 | 665.5 - 695.5 | 0.16 | 2.5 PM | 4M50W7D | |
| 27 | 673.0 - 688.0 | 0.1714 | 2.5 PM | 17M9G7D | |
| 27 | 673.0 - 688.0 | 0.1596 | 2.5 PM | 17M9W7D | |
| 90 | 816.5 - 821.5 | 0.175 | 2.5 PM | 4M51G7D | |
| 90 | 815.5 - 822.5 | 0.1552 | 2.5 PM | 2M70W7D | |
| 90 | 819.0 - 819.0 | 0.1722 | 2.5 PM | 8M96G7D | |
| 90 | 819.0 - 819.0 | 0.1374 | 2.5 PM | 8M96W7D | |
| 90 | 790.5 - 795.5 | 0.1714 | 2.5 PM | 4M51G7D | |
| 90 | 790.5 - 795.5 | 0.1883 | 2.5 PM | 4M49W7D | |
| 90 | 793.0 - 793.0 | 0.2104 | 2.5 PM | 8M94G7D | |
| 90 | 793.0 - 793.0 | 0.2158 | 2.5 PM | 8M97W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
EAS Grant - Application 7jHjd3qpjtcCYR0VCgLjmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fibocom Wireless Inc. 1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan ShenZhen, China |
Date of Grant: 10/12/2024 Application Dated: 10/08/2024 |
| Attention: Patrick Ma , Certification Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZMOSC228GL |
| Name of Grantee: | Fibocom Wireless Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22 | 824.2 - 848.8 | 1.1858 | 2.5 PM | 245KGXW | |
| 22 | 826.4 - 846.6 | 0.1778 | 2.5 PM | 4M14F9W | |
| 22 | 824.7 - 848.3 | 0.1563 | 2.5 PM | 4M52W7D | |
| 22 | 829.0 - 844.0 | 0.182 | 2.5 PM | 8M99G7D | |
| 22 | 829.0 - 844.0 | 0.1556 | 2.5 PM | 8M98W7D | |
| 22 | 831.5 - 841.5 | 0.1954 | 2.5 PM | 13M5G7D | |
| 22 | 831.5 - 841.5 | 0.1718 | 2.5 PM | 13M5W7D | |
| 24E | 1850.2 - 1909.8 | 1.3305 | 2.5 PM | 245KGXW | |
| 24E | 1852.4 - 1907.6 | 0.5188 | 2.5 PM | 4M15F9W | |
| 24E | 1852.5 - 1907.5 | 0.3811 | 2.5 PM | 4M52G7D | |
| 24E | 1860.0 - 1900.0 | 0.3664 | 2.5 PM | 2M71W7D | |
| 24E | 1852.5 - 1907.5 | 0.3499 | 2.5 PM | 17M9G7D | |
| 24E | 1851.5 - 1908.5 | 0.3214 | 2.5 PM | 17M9W7D | |
| 24E | 1852.5 - 1912.5 | 0.2296 | 2.5 PM | 4M52G7D | |
| 24E | 1860.0 - 1905.0 | 0.2099 | 2.5 PM | 18M0G7D | |
| 24E | 1860.0 - 1905.0 | 0.1064 | 2.5 PM | 17M9W7D | |
| 27 | 1712.4 - 1752.6 | 0.4864 | 2.5 PM | 4M13F9W | |
| 27 | 1715.0 - 1750.0 | 0.4864 | 2.5 PM | 13M5G7D | |
| 27 | 1715.0 - 1750.0 | 0.4864 | 2.5 PM | 13M5W7D | |
| 27 | 1720.0 - 1740.0 | 0.4064 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1740.0 | 0.4395 | 2.5 PM | 17M9W7D | |
| 27 | 2510.0 - 2560.0 | 0.369 | 2.5 PM | 18M0G7D | |
| 27 | 2510.0 - 2560.0 | 0.3133 | 2.5 PM | 17M9W7D | |
| 27 | 704.0 - 711.0 | 0.1849 | 2.5 PM | 9M01G7D | |
| 27 | 704.0 - 711.0 | 0.1563 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.1679 | 2.5 PM | 4M50W7D | |
| 27 | 782.0 - 782.0 | 0.1923 | 2.5 PM | 8M95G7D | |
| 27 | 782.0 - 782.0 | 0.1489 | 2.5 PM | 8M96W7D | |
| 27 | 709.0 - 711.0 | 0.1766 | 2.5 PM | 9M01G7D | |
| 27 | 709.0 - 711.0 | 0.1542 | 2.5 PM | 9M99W7D | |
| 27 | 2577.5 - 2612.5 | 0.3597 | 2.5 PM | 13M4G7D | |
| 27 | 2577.5 - 2612.5 | 0.3076 | 2.5 PM | 13M5W7D | |
| 27 | 2580.0 - 2610.0 | 0.3467 | 2.5 PM | 17M9G7D | |
| 27 | 2580.0 - 2610.0 | 0.2985 | 2.5 PM | 18M0W7D | |
| 27 | 2506.0 - 2680.0 | 0.4188 | 2.5 PM | 17M9G7D | |
| 27 | 2506.0 - 2680.0 | 0.3707 | 2.5 PM | 17M9W7D | |
| 27 | 1715.0 - 1775.0 | 0.4416 | 2.5 PM | 8M98G7D | |
| 27 | 1715.0 - 1775.0 | 0.3741 | 2.5 PM | 8M98W7D | |
| 27 | 1720.0 - 1770.0 | 0.4207 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1770.0 | 0.3673 | 2.5 PM | 17M9W7D | |
| 27 | 668.0 - 693.0 | 0.1927 | 2.5 PM | 8M99G7D | |
| 27 | 665.5 - 695.5 | 0.16 | 2.5 PM | 4M50W7D | |
| 27 | 673.0 - 688.0 | 0.1714 | 2.5 PM | 17M9G7D | |
| 27 | 673.0 - 688.0 | 0.1596 | 2.5 PM | 17M9W7D | |
| 90 | 816.5 - 821.5 | 0.175 | 2.5 PM | 4M51G7D | |
| 90 | 815.5 - 822.5 | 0.1552 | 2.5 PM | 2M70W7D | |
| 90 | 819.0 - 819.0 | 0.1722 | 2.5 PM | 8M96G7D | |
| 90 | 819.0 - 819.0 | 0.1374 | 2.5 PM | 8M96W7D | |
| 90 | 790.5 - 795.5 | 0.1714 | 2.5 PM | 4M51G7D | |
| 90 | 790.5 - 795.5 | 0.1883 | 2.5 PM | 4M49W7D | |
| 90 | 793.0 - 793.0 | 0.2104 | 2.5 PM | 8M94G7D | |
| 90 | 793.0 - 793.0 | 0.2158 | 2.5 PM | 8M97W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 emissions, which are conducted. Single Modular Approval for mobile RF Exposure conditions. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm from all persons and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify Fibocom Wireless, Inc. |
| Mail To: |