1. FCC ID
  2. ZMO
  3. ZMOSU806DEAU

FCC ID ZMOSU806DEAU

LTE Module

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: SU806DEAU
Latest application date: 2022-03-25

FCC ID Device Details

FCC IDZMOSU806DEAU
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeSU806DEAU
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com
Equipment ClassLTE Module
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-03-25
824.2-848.8 MHzOriginal Equipment2022-03-25
2402-2480 MHzOriginal Equipment2022-03-25
2402-2480 MHzOriginal Equipment2022-03-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-03-25PDF 1.7 MB
Users ManualUsers Manual2022-03-25PDF 1.7 MB
Internal PhotosInternal Photos2022-03-25PDF 967.7 KB
External PhotosExternal Photos2022-03-25PDF 450.7 KB
Label and LocationID Label/Location Info2022-03-25PDF 349.1 KB
Test Setup PhotosTest Setup Photos2022-03-25PDF 1.3 MB
Test Setup Photos DFSTest Setup Photos2022-03-25PDF 237.1 KB
Test ReportTest Report2022-03-25PDF 4.8 MB
Test Report 1-1Test Report2022-03-25PDF 5.4 MB
Test Report 1-2Test Report2022-03-25PDF 5.2 MB
Test Report 1-3Test Report2022-03-25PDF 4.8 MB
Test Report 2.4G 1-1Test Report2022-03-25PDF 5.2 MB
Test Report 2.4G 1-2Test Report2022-03-25PDF 1.5 MB
Test Report 22-1Test Report2022-03-25PDF 4.2 MB
Test Report 22-2Test Report2022-03-25PDF 3.3 MB
Test Report 24-1Test Report2022-03-25PDF 4.1 MB
Test Report 24-2Test Report2022-03-25PDF 5.1 MB
Test Report 24-3Test Report2022-03-25PDF 684.6 KB
Test Report 27-1Test Report2022-03-25PDF 2.6 MB
Test Report 27-2Test Report2022-03-25PDF 5 MB
Test Report 27-3Test Report2022-03-25PDF 4.8 MB
Test Report 27-4Test Report2022-03-25PDF 5 MB
Test Report 27-5Test Report2022-03-25PDF 4.9 MB
Test Report 27-6Test Report2022-03-25PDF 333.1 KB
Test Report BT LETest Report2022-03-25PDF 4 MB
Test Report DFSTest Report2022-03-25PDF 1.5 MB
Ad Hoc DeclarationCover Letter(s)2022-03-25PDF 111.7 KB
Ad Hoc Mode DeclarationCover Letter(s)2022-03-25PDF 111.7 KB
CONF LetterCover Letter(s)2022-03-25PDF 118.6 KB
Confidentiality LetterCover Letter(s)2022-03-25PDF 118.6 KB
Declaration LetterCover Letter(s)2022-03-25PDF 12.1 KB
Modular Approve LetterCover Letter(s)2022-03-25PDF 170.4 KB
POA LetterCover Letter(s)2022-03-25PDF 12.7 KB
RF Exposure InfoRF Exposure Info2022-03-25PDF 160.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 562.9 KB
Schematics Metadata onlySchematicsPDF 345 KB
Schematics 2011 Metadata onlySchematicsPDF 345 KB
Operation Description Metadata onlyOperational DescriptionPDF 726.6 KB
Operation Description Metadata onlyOperational DescriptionPDF 143.2 KB
Operation Description Software Metadata onlyOperational DescriptionPDF 143.2 KB
Antenna Spec Metadata onlyParts List/Tune Up InfoPDF 1.2 MB
Past List Metadata onlyParts List/Tune Up InfoPDF 242.1 KB
Tune-UP Metadata onlyParts List/Tune Up InfoPDF 186.5 KB

Application Information

Application IDgu93nLyzI9V7cJLz6uEs3Q==
Final Action Date2022-03-25
Application PurposeOriginal Equipment
Applicant FRN0020891057
ModelSU806DEAU
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionLTE Module
Responsible PartyLucy Liu, Certification Manager, lucy.liu@fibocom.com , +8675526733555
Test FirmSophia Huang, BTL Inc., Sophia.huang@newbtl.com , +86-769-83183000
TCB EmailTEI@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.

Applications

Application IDDatePurpose
gu93nLyzI9V7cJLz6uEs3Q==2022-03-25Original Equipment
eiAYT8sNiWcOhAg5sn5kUw==2022-03-25Original Equipment
VkTyjkpwFFmmhSXol29d7A==2022-03-25Original Equipment
H76qPZtEKs7blRZddzfN/w==2022-03-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.7-848.3 MHz0.17422.5ppm1M10W7D22H
825.5-847.5 MHz0.1752.5ppm2M71G7D22H
826.4-846.6 MHz0.18412.5ppm4M16F9W22H
829-844 MHz0.17422.5ppm9M00G7D22H
829-844 MHz0.15242.5ppm9M00W7D22H
1710.7-1754.3 MHz0.34362.5ppm1M10W7D27
1711.5-1753.5 MHz0.35322.5ppm2M71G7D27
1720-1740 MHz0.34912.5ppm13M5G7D27
1720-1740 MHz0.31332.5ppm13M5W7D27
1850.2-1909.8 MHz1.31832.5ppm247KGXW24E
1850.2-1909.8 MHz0.52122.5ppm245KG7W24E
1850.7-1909.3 MHz0.30972.5ppm1M10W7D24E
1851.5-1908.5 MHz0.3172.5ppm4M54G7D24E
1852.4-1907.6 MHz0.34282.5ppm4M16F9W24E
1860-1900 MHz0.30622.5ppm18M0G7D24E
1860-1900 MHz0.29112.5ppm18M0W7D24E
2402-2480 MHz0.007500015CCC
2402-2480 MHz0.001315CCC
2412-2462 MHz0.048315CCC
2507.5-2562.5 MHz0.24772.5ppm13M5G7D27
2507.5-2562.5 MHz0.23662.5ppm18M1W7D27
2510-2560 MHz0.23282.5ppm18M1G7D27
2510-2560 MHz0.21132.5ppm13M5W7D27
2540-2650 MHz0.25942.5ppm9M00W7D27
2545-2645 MHz0.2712.5ppm18M0G7D27
2545-2645 MHz0.2462.5ppm18M0W7D27
2575-2615 MHz0.21482.5ppm9M01W7D27
2580-2610 MHz0.23932.5ppm18M0G7D27
2580-2610 MHz0.21092.5ppm18M0W7D27
5180-5240 MHz0.050715ECC
5260-5320 MHz0.043615ECC
5500-5700 MHz0.047315ECC
5745-5825 MHz0.048115ECC

Grants

TCB Grant - Application VkTyjkpwFFmmhSXol29d7A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 03/25/2022

Application Dated: 03/24/2022
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0013  
CC 15C 2412.0  -  2462.0 0.0483  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VkTyjkpwFFmmhSXol29d7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 03/25/2022

Application Dated: 03/24/2022
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0013  
CC 15C 2412.0  -  2462.0 0.0483  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application H76qPZtEKs7blRZddzfN/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 03/25/2022

Application Dated: 03/24/2022
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application H76qPZtEKs7blRZddzfN/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 03/25/2022

Application Dated: 03/24/2022
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application gu93nLyzI9V7cJLz6uEs3Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 03/25/2022

Application Dated: 03/24/2022
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0507  
CC 15E 5260.0  -  5320.0 0.0436  
CC 15E 5500.0  -  5700.0 0.0473  
CC 15E 5745.0  -  5825.0 0.0481  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application gu93nLyzI9V7cJLz6uEs3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 03/25/2022

Application Dated: 03/24/2022
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0507  
CC 15E 5260.0  -  5320.0 0.0436  
CC 15E 5500.0  -  5700.0 0.0473  
CC 15E 5745.0  -  5825.0 0.0481  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eiAYT8sNiWcOhAg5sn5kUw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 03/25/2022

Application Dated: 03/24/2022
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.5417 2.5  PM 247KGXW
22H 824.2  -  848.8 0.3126 2.5  PM 245KG7W
22H 826.4  -  846.6 0.1841 2.5  PM 4M16F9W
22H 829.0  -  844.0 0.1742 2.5  PM 9M00G7D
22H 825.5  -  847.5 0.175 2.5  PM 2M71G7D
22H 829.0  -  844.0 0.1524 2.5  PM 9M00W7D
22H 824.7  -  848.3 0.1742 2.5  PM 1M10W7D
24E 1850.2  -  1909.8 1.3183 2.5  PM 247KGXW
24E 1850.2  -  1909.8 0.5212 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.3428 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.3062 2.5  PM 18M0G7D
24E 1851.5  -  1908.5 0.317 2.5  PM 4M54G7D
24E 1860.0  -  1900.0 0.2911 2.5  PM 18M0W7D
24E 1850.7  -  1909.3 0.3097 2.5  PM 1M10W7D
27 1720.0  -  1740.0 0.3491 2.5  PM 13M5G7D
27 1711.5  -  1753.5 0.3532 2.5  PM 2M71G7D
27 1720.0  -  1740.0 0.3133 2.5  PM 13M5W7D
27 1710.7  -  1754.3 0.3436 2.5  PM 1M10W7D
27 2510.0  -  2560.0 0.2328 2.5  PM 18M1G7D
27 2507.5  -  2562.5 0.2477 2.5  PM 13M5G7D
27 2510.0  -  2560.0 0.2113 2.5  PM 13M5W7D
27 2507.5  -  2562.5 0.2366 2.5  PM 18M1W7D
27 2580.0  -  2610.0 0.2393 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.2109 2.5  PM 18M0W7D
27 2575.0  -  2615.0 0.2148 2.5  PM 9M01W7D
27 2545.0  -  2645.0 0.271 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.246 2.5  PM 18M0W7D
27 2540.0  -  2650.0 0.2594 2.5  PM 9M00W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

EAS Grant - Application eiAYT8sNiWcOhAg5sn5kUw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 03/25/2022

Application Dated: 03/24/2022
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSU806DEAU
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.5417 2.5  PM 247KGXW
22H 824.2  -  848.8 0.3126 2.5  PM 245KG7W
22H 826.4  -  846.6 0.1841 2.5  PM 4M16F9W
22H 829.0  -  844.0 0.1742 2.5  PM 9M00G7D
22H 825.5  -  847.5 0.175 2.5  PM 2M71G7D
22H 829.0  -  844.0 0.1524 2.5  PM 9M00W7D
22H 824.7  -  848.3 0.1742 2.5  PM 1M10W7D
24E 1850.2  -  1909.8 1.3183 2.5  PM 247KGXW
24E 1850.2  -  1909.8 0.5212 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.3428 2.5  PM 4M16F9W
24E 1860.0  -  1900.0 0.3062 2.5  PM 18M0G7D
24E 1851.5  -  1908.5 0.317 2.5  PM 4M54G7D
24E 1860.0  -  1900.0 0.2911 2.5  PM 18M0W7D
24E 1850.7  -  1909.3 0.3097 2.5  PM 1M10W7D
27 1720.0  -  1740.0 0.3491 2.5  PM 13M5G7D
27 1711.5  -  1753.5 0.3532 2.5  PM 2M71G7D
27 1720.0  -  1740.0 0.3133 2.5  PM 13M5W7D
27 1710.7  -  1754.3 0.3436 2.5  PM 1M10W7D
27 2510.0  -  2560.0 0.2328 2.5  PM 18M1G7D
27 2507.5  -  2562.5 0.2477 2.5  PM 13M5G7D
27 2510.0  -  2560.0 0.2113 2.5  PM 13M5W7D
27 2507.5  -  2562.5 0.2366 2.5  PM 18M1W7D
27 2580.0  -  2610.0 0.2393 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.2109 2.5  PM 18M0W7D
27 2575.0  -  2615.0 0.2148 2.5  PM 9M01W7D
27 2545.0  -  2645.0 0.271 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.246 2.5  PM 18M0W7D
27 2540.0  -  2650.0 0.2594 2.5  PM 9M00W7D

Output Power is EIRP and ERP for above and below 1 GHz, respectively. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



Mail To: