FCC ID QYLEM7511F

WWAN Module

by Getac Technology Corporation

Grantee Code: QYL   Product Code: EM7511F
Latest application date: 2021-04-15

FCC ID Device Details

FCC IDQYLEM7511F
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQYL
Product CodeEM7511F
Applicant BusinessGetac Technology Corporation 🇹🇼
Related Domains getac.com.tw
Equipment ClassWWAN Module
Test FirmSporton International Inc.

Additional Linked Details

ManufacturerGetac Technology Corporation
Model NumberEM7511
Certification Date2021-04-15
Manufacturer Website www.getac.com
Device TypeWireless Module
5G Certified

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
3550-3700 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NEM75S Grant Date: 12/11/20182021-04-15
699-716 MHzClass II permissive change or modification of presently authorized equipment2018-11-07
699-716 MHzChange in identification of presently authorized equipment. Original FCC ID: N7NEM75S Grant Date: 04/15/20182018-10-09

Exhibits

DocumentTypeAvailableFile
Host User ManualUsers Manual2019-05-06PDF 1.6 MB
Internal PhotosInternal Photos2019-05-06PDF 3.1 MB
External PhotoExternal Photos2021-04-15PDF 3.9 MB
External PhotosExternal Photos2019-05-06PDF 3.3 MB
External PhotosExternal Photos2018-10-09PDF 3.9 MB
Label InfoID Label/Location Info2021-04-15PDF 98.4 KB
Host Label LocationID Label/Location Info2018-11-07PDF 51.1 KB
Host Label SampleID Label/Location Info2018-11-07PDF 57.3 KB
Test Setup Photos PCB LTETest Setup Photos2019-05-06PDF 236.1 KB
Test Setup Photos PCB LTE B14Test Setup Photos2019-05-06PDF 228.5 KB
Test Setup Photos PCB LTE B26Test Setup Photos2019-05-06PDF 235.9 KB
Test Setup Photos PCB WCDMATest Setup Photos2019-05-06PDF 257.6 KB
Test Setup Photos RF ExposureTest Setup Photos2019-05-06PDF 92.4 KB
Test Report PCB LTETest Report2018-11-07PDF 496.7 KB
Test Report PCB LTE B14Test Report2018-11-07PDF 419.5 KB
Test Report PCB LTE B26Test Report2018-11-07PDF 356.8 KB
Test Report PCB WCDMATest Report2018-11-07PDF 466.6 KB
Change In FCC ID_New GranteeCover Letter(s)2021-04-15PDF 133.1 KB
Change In FCC ID_Original GranteeCover Letter(s)2021-04-15PDF 173.8 KB
POACover Letter(s)2021-04-15PDF 94.4 KB
Class II Permissive Change LetterCover Letter(s)2018-11-07PDF 91.7 KB
Confidentiality Request LetterCover Letter(s)2018-11-07PDF 98.9 KB
POACover Letter(s)2018-11-07PDF 94.4 KB
Change in ID New GranteeCover Letter(s)2018-10-09PDF 96.9 KB
Change in ID Original GranteeCover Letter(s)2018-10-09PDF 173.8 KB
RF ExposureRF Exposure Info2018-11-07PDF 2.4 MB
RF Exposure Appendix ARF Exposure Info2018-11-07PDF 423.1 KB
RF Exposure Appendix BRF Exposure Info2018-11-07PDF 687.7 KB
RF Exposure Appendix CRF Exposure Info2018-11-07PDF 3.7 MB
Operational Description Antenna Metadata onlyOperational DescriptionPDF 183.1 KB
Operational Description Power Reduct Metadata onlyOperational DescriptionPDF 850 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 454.9 KB

Application Information

Application IDAmdJ9Tqmxe9SWLhAhtezMA==
Final Action Date2021-04-15
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: N7NEM75S Grant Date: 12/11/2018
Applicant FRN0018268243
ModelEM7511F
Frequency Range3550-3700 MHz
Equipment ClassCBE - Citizens Band End User Devices
Device DescriptionWWAN Module
Responsible PartyKevin Chiang, kevin.chiang@getac.com.tw , +886-2-27857888
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 88633273456
TCB Emailtei@timcoengr.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use.

Applications

Application IDDatePurpose
AmdJ9Tqmxe9SWLhAhtezMA==2021-04-15Change in identification of presently authorized equipment. Original FCC ID: N7NEM75S Grant Date: 12/11/2018
+3wa+hhi93REqPRaWXNYhQ==2018-11-07Class II permissive change or modification of presently authorized equipment
OiZK7QPqKyjRHL1iWms/6A==2018-10-09Change in identification of presently authorized equipment. Original FCC ID: N7NEM75S Grant Date: 04/15/2018

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699-716 MHz0.1892.5ppm9M11G7D27BC
699-716 MHz0.162.5ppm9M09W7D27BC
699-716 MHz0.1612.5ppm2M73W7D27BC
777-787 MHz0.1932.5ppm8M97G7D27BC
777-787 MHz0.1652.5ppm9M01W7D27BC
788-798 MHz0.232.5ppm9M79G7D9BC
788-798 MHz0.1992.5ppm9M83W7D9BC
814-824 MHz0.192.5ppm14M2G7D9BC
814-824 MHz0.1572.5ppm14M5W7D9BC
814-824 MHz0.162.5ppm3M03W7D9BC
824-849 MHz0.1922.5ppm13M5G7D22HBC
824-849 MHz0.162.5ppm13M5W7D22HBC
1710-1780 MHz0.1992.5ppm18M3G7D27BC
1710-1780 MHz0.1692.5ppm18M5W7D27BC
1850-1910 MHz0.182.5ppm18M5G7D24EBC
1850-1910 MHz0.1552.5ppm18M5W7D24EBC
2305-2315 MHz0.1382.5ppm8M99G7D27BC
2305-2315 MHz0.1162.5ppm9M05W7D27BC
2305-2315 MHz0.1392.5ppm4M51G7D27BC
2305-2315 MHz0.1172.5ppm4M49W7D27BC
2496-2690 MHz0.1582.5ppm18M5G7D27BC
2496-2690 MHz0.1292.5ppm18M5W7D27BC
2496-2690 MHz0.132.5ppm14M5W7D27BC
2496-2690 MHz0.1992.5ppm37M7G7D27BC
2496-2690 MHz0.1812.5ppm37M9W7D27BC
2500-2570 MHz0.1992.5ppm37M5G7D27BC
2500-2570 MHz0.1662.5ppm37M7W7D27BC
2500-2570 MHz0.1522.5ppm18M5G7D27BC
2500-2570 MHz0.1292.5ppm18M5W7D27BC
2500-2570 MHz0.1572.5ppm4M50G7D27BC
2500-2570 MHz0.1342.5ppm4M50W7D27BC
3550-3700 MHz0.1912.5ppm18M0G7D96BC
3550-3700 MHz0.192.5ppm17M9W7D96BC
3550-3700 MHz0.1822.5ppm13M4G7D96BC
3550-3700 MHz0.192.5ppm13M4W7D96BC
3550-3700 MHz0.1832.5ppm8M96G7D96BC
3550-3700 MHz0.1872.5ppm8M96W7D96BC
3550-3700 MHz0.1822.5ppm4M45G7D96BC
3550-3700 MHz0.1512.5ppm4M45W7D96BC

Grants

TCB Grant - Application OiZK7QPqKyjRHL1iWms/6A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 10/09/2018

Application Dated: 10/08/2018
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 90 788.0  -  798.0 0.23 2.5  PM 9M79G7D
BC 90 788.0  -  798.0 0.199 2.5  PM 9M83W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application OiZK7QPqKyjRHL1iWms/6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 10/09/2018

Application Dated: 10/08/2018
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 90 788.0  -  798.0 0.23 2.5  PM 9M79G7D
BC 90 788.0  -  798.0 0.199 2.5  PM 9M83W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application AmdJ9Tqmxe9SWLhAhtezMA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/15/2021

Application Dated: 04/14/2021
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: Citizens Band End User Devices
Notes: WWAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 96 3550.0  -  3700.0 0.191 2.5  PM 18M0G7D
BC 96 3550.0  -  3700.0 0.19 2.5  PM 17M9W7D
BC 96 3550.0  -  3700.0 0.182 2.5  PM 13M4G7D
BC 96 3550.0  -  3700.0 0.19 2.5  PM 13M4W7D
BC 96 3550.0  -  3700.0 0.183 2.5  PM 8M96G7D
BC 96 3550.0  -  3700.0 0.187 2.5  PM 8M96W7D
BC 96 3550.0  -  3700.0 0.182 2.5  PM 4M45G7D
BC 96 3550.0  -  3700.0 0.151 2.5  PM 4M45W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application AmdJ9Tqmxe9SWLhAhtezMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 04/15/2021

Application Dated: 04/14/2021
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: Citizens Band End User Devices
Notes: WWAN Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 96 3550.0  -  3700.0 0.191 2.5  PM 18M0G7D
BC 96 3550.0  -  3700.0 0.19 2.5  PM 17M9W7D
BC 96 3550.0  -  3700.0 0.182 2.5  PM 13M4G7D
BC 96 3550.0  -  3700.0 0.19 2.5  PM 13M4W7D
BC 96 3550.0  -  3700.0 0.183 2.5  PM 8M96G7D
BC 96 3550.0  -  3700.0 0.187 2.5  PM 8M96W7D
BC 96 3550.0  -  3700.0 0.182 2.5  PM 4M45G7D
BC 96 3550.0  -  3700.0 0.151 2.5  PM 4M45W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application +3wa+hhi93REqPRaWXNYhQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/07/2018

Application Dated: 10/31/2018
Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 90 788.0  -  798.0 0.23 2.5  PM 9M79G7D
BC 90 788.0  -  798.0 0.199 2.5  PM 9M83W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D

Class II Permissive Change. Limited Modular Approval. Adds portable use case with Getac Tablet Model F110.

Power out is conducted at the antenna terminal. This device must not be co- located or operate in conjunction with any other antenna or transmitter, except as evaluated in this filing, or in accordance with FCC multi- transmitter evaluation procedures. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.59 W/kg, respectively.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application +3wa+hhi93REqPRaWXNYhQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Getac Technology Corporation
5F.,Building A,No.209,Sec.1 Nangang.,Rd.,
Taipei City, 11568
Taiwan
  Date of Grant: 11/07/2018

Application Dated: 10/31/2018
 
Attention: Kevin Chiang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QYLEM7511F
Name of Grantee:  Getac Technology Corporation
Equipment Class: PCS Licensed Transmitter
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 90 788.0  -  798.0 0.23 2.5  PM 9M79G7D
BC 90 788.0  -  798.0 0.199 2.5  PM 9M83W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D

Class II Permissive Change. Limited Modular Approval. Adds portable use case with Getac Tablet Model F110.

Power out is conducted at the antenna terminal. This device must not be co- located or operate in conjunction with any other antenna or transmitter, except as evaluated in this filing, or in accordance with FCC multi- transmitter evaluation procedures. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.59 W/kg, respectively.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: