SMG973U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ RF Exposure Info 2 Samsung Electronics Co Ltd

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1057
Communication System: UID 0, CW; Frequency: 5250 MHz; Duty Cycle: 1:1
Medium: 5GHz Head Medium parameters used (interpolated):
f = 5250 MHz; σ = 4.593 S/m; εr = 35.307; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-26-2018; Ambient Temp: 20.5°C; Tissue Temp: 20.2°C
Probe: EX3DV4 - SN7409; ConvF(5.2, 5.2, 5.2) @ 5250 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP v5.0 (Right); Type: QD000P40CD; Serial: TP:1759
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5250 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 15.8 W/kg
SAR(1 g) = 3.87 W/kg
Deviation(1 g) = -2.27%
0 dB = 9.09 W/kg = 9.59 dBW/kg
B15
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1057
Communication System: UID 0, CW; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium: 5GHz Head Medium parameters used:
f = 5600 MHz; σ = 4.957 S/m; εr = 34.816; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-26-2018; Ambient Temp: 20.5°C; Tissue Temp: 20.2°C
Probe: EX3DV4 - SN7409; ConvF(4.77, 4.77, 4.77) @ 5600 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP v5.0 (Right); Type: QD000P40CD; Serial: TP:1759
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5600 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 18.2 W/kg
SAR(1 g) = 4.09 W/kg
Deviation(1 g) = -2.73%
0 dB = 9.74 W/kg = 9.89 dBW/kg
B16
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1057
Communication System: UID 0, CW; Frequency: 5750 MHz; Duty Cycle: 1:1
Medium: 5GHz Head Medium parameters used (interpolated):
f = 5750 MHz; σ = 5.111 S/m; εr = 34.607; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-26-2018; Ambient Temp: 20.5°C; Tissue Temp: 20.2°C
Probe: EX3DV4 - SN7409; ConvF(4.82, 4.82, 4.82) @ 5750 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP v5.0 (Right); Type: QD000P40CD; Serial: TP:1759
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5750 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 18.0 W/kg
SAR(1 g) = 3.79 W/kg
Deviation(1 g) = -5.84%
0 dB = 9.34 W/kg = 9.70 dBW/kg
B17
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 750 MHz; Type: D750V3; Serial: 1054
Communication System: UID 0, CW; Frequency: 750 MHz; Duty Cycle: 1:1
Medium: 750 Body; Medium parameters used (interpolated):
f = 750 MHz; σ = 0.966 S/m; εr = 52.992; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 11-18-2018; Ambient Temp: 21.4°C; Tissue Temp: 20.4°C
Probe: EX3DV4 - SN7406; ConvF(9.91, 9.91, 9.91) @ 750 MHz; Calibrated: 5/22/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn859; Calibrated: 5/22/2018
Phantom: Twin-SAM V5.0 Back Right; Type: QD 000 P40 CD; Serial: 1692
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
750 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x15x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 2.75 W/kg
SAR(1 g) = 1.78 W/kg
Deviation(1 g) = 3.37%
0 dB = 2.42 W/kg = 3.84 dBW/kg
B18
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d047
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium: 835 Body Medium parameters used:
f = 835 MHz; σ = 0.957 S/m; εr = 53.795; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 11-14-2018; Ambient Temp: 23.5°C; Tissue Temp: 21.4°C
Probe: EX3DV4 - SN7410; ConvF(9.63, 9.63, 9.63) @ 835 MHz; Calibrated: 7/20/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1322; Calibrated: 7/11/2018
Phantom: SAM Front; Type: SAM; Serial: 1686
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
835 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 3.14 W/kg
SAR(1 g) = 2.08 W/kg
Deviation(1 g) = 7.11%
0 dB = 2.78 W/kg = 4.44 dBW/kg
B19
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d132
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium: 835 Body; Medium parameters used:
f = 835 MHz; σ = 0.957 S/m; εr = 53.433; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 11-25-2018; Ambient Temp: 20.1°C; Tissue Temp: 21.3°C
Probe: EX3DV4 - SN7409; ConvF(9.63, 9.63, 9.63) @ 835 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP v5.0 (Right); Type: QD000P40CD; Serial: TP:1759
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
835 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 3.14 W/kg
SAR(1 g) = 2.04 W/kg
Deviation(1 g) = 5.05%
0 dB = 2.76 W/kg = 4.41 dBW/kg
B20
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d133
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium: 835 Body Medium parameters used:
f = 835 MHz; σ = 0.954 S/m; εr = 55.283; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 11-27-2018; Ambient Temp: 22.0°C; Tissue Temp: 20.3°C
Probe: EX3DV4 - SN7308; ConvF(10.19, 10.19, 10.19) @ 835 MHz; Calibrated: 8/23/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1558; Calibrated: 10/3/2018
Phantom: Twin-SAM V8.0; Type: QD 000 P41 Ax; Serial: 1966
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
835 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 2.83 W/kg
SAR(1 g) = 1.87 W/kg
Deviation(1 g) = -4.10%
0 dB = 2.49 W/kg = 3.96 dBW/kg
B21
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d047
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium: 835 Body; Medium parameters used:
f = 835 MHz; σ = 0.982 S/m; εr = 53.648; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 11-29-2018; Ambient Temp: 21.4°C; Tissue Temp: 19.9°C
Probe: EX3DV4 - SN7406; ConvF(9.61, 9.61, 9.61) @ 835 MHz; Calibrated: 5/22/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn859; Calibrated: 5/22/2018
Phantom: Twin-SAM V4.0 Front Right; Type: QD 000 P40 CC; Serial: 1167
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
835 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 3.12 W/kg
SAR(1 g) = 2.04 W/kg
Deviation(1 g) = 5.05%
0 dB = 2.75 W/kg = 4.39 dBW/kg
B22
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 835 MHz; Type: D835V2; Serial: 4d047
Communication System: UID 0, CW; Frequency: 835 MHz; Duty Cycle: 1:1
Medium: 835 Body; Medium parameters used:
f = 835 MHz; σ = 0.974 S/m; εr = 55; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.5 cm
Test Date: 12-03-2018; Ambient Temp: 21.3°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7406; ConvF(9.61, 9.61, 9.61) @ 835 MHz; Calibrated: 5/22/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn859; Calibrated: 5/22/2018
Phantom: Twin-SAM V4.0 Front Right; Type: QD 000 P40 CC; Serial: 1167
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
835 MHz System Verification at 23.0 dBm (200 mW)
Area Scan (7x14x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 3.06 W/kg
SAR(1 g) = 2.01 W/kg
Deviation(1 g) = 3.50%
0 dB = 2.69 W/kg = 4.30 dBW/kg
B23
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: 1148
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1
Medium: 1750 Body Medium parameters used:
f = 1750 MHz; σ = 1.544 S/m; εr = 51.081; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-15-2018; Ambient Temp: 19.7°C; Tissue Temp: 19.6°C
Probe: ES3DV3 - SN3347; ConvF(5.17, 5.17, 5.17) @ 1750 MHz; Calibrated: 3/27/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn665; Calibrated: 2/15/2018
Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1800
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1750 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 6.98 W/kg
SAR(1 g) = 3.93 W/kg; SAR(10 g) = 2.07 W/kg
Deviation(1 g) = 6.22%; Deviation(10 g) = 4.55%
0 dB = 4.93 W/kg = 6.93 dBW/kg
B24
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: 1148
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1
Medium: 1750 Body Medium parameters used:
f = 1750 MHz; σ = 1.49 S/m; εr = 50.865; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-18-2018; Ambient Temp: 19.9°C; Tissue Temp: 21.0°C
Probe: ES3DV3 - SN3347; ConvF(5.17, 5.17, 5.17) @ 1750 MHz; Calibrated: 3/27/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn665; Calibrated: 2/15/2018
Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1800
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1750 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 6.64 W/kg
SAR(10 g) = 1.97 W/kg
Deviation(10 g) = -0.51%
0 dB = 4.74 W/kg = 6.76 dBW/kg
B25
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: 1150
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1
Medium: 1750 Body Medium parameters used:
f = 1750 MHz; σ = 1.513 S/m; εr = 50.84; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-21-2018; Ambient Temp: 19.7°C; Tissue Temp: 21.1°C
Probe: ES3DV3 - SN3347; ConvF(5.17, 5.17, 5.17) @ 1750 MHz; Calibrated: 3/27/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn665; Calibrated: 2/15/2018
Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1800
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1750 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 6.73 W/kg
SAR(1 g) = 3.8 W/kg
Deviation(1 g) = 3.83%
0 dB = 4.76 W/kg = 6.78 dBW/kg
B26
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: 1148
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1
Medium: 1750 Body; Medium parameters used:
f = 1750 MHz; σ = 1.542 S/m; εr = 51.118; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-04-2018; Ambient Temp: 22.6°C; Tissue Temp: 20.2°C
Probe: EX3DV4 - SN7409; ConvF(7.91, 7.91, 7.91) @ 1750 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP (Left); Type: SAM; Serial: 1715
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1750 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 7.23 W/kg
SAR(1 g) = 3.92 W/kg
Deviation(1 g) = 5.95%
0 dB = 5.99 W/kg = 7.77 dBW/kg
B27
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d148
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body; Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.575 S/m; εr = 51.505; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-12-2018; Ambient Temp: 21.8°C; Tissue Temp: 21.0°C
Probe: EX3DV4 - SN7409; ConvF(7.6, 7.6, 7.6) @ 1900 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP (Left); Type: SAM; Serial: 1715
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 7.79 W/kg
SAR(1 g) = 4.17 W/kg
Deviation(1 g) = 5.30%
0 dB = 6.51 W/kg = 8.14 dBW/kg
B28
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d148
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.579 S/m; εr = 51.286; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-14-2018; Ambient Temp: 23.9°C; Tissue Temp: 21.3°C
Probe: ES3DV3 - SN3213; ConvF(4.88, 4.88, 4.88) @ 1900 MHz; Calibrated: 2/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1272; Calibrated: 2/9/2018
Phantom: SAM V5.0 Right; Type: QD000P40CD; Serial: 1647
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 7.46 W/kg
SAR(1 g) = 4.23 W/kg
Deviation(1 g) = 6.82%
0 dB = 5.36 W/kg = 7.29 dBW/kg
B29
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d148
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.545 S/m; εr = 51.477; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-19-2018; Ambient Temp: 24.4°C; Tissue Temp: 21.8°C
Probe: ES3DV3 - SN3213; ConvF(4.88, 4.88, 4.88) @ 1900 MHz; Calibrated: 2/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1272; Calibrated: 2/9/2018
Phantom: SAM V5.0 Right; Type: QD000P40CD; Serial: 1647
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 6.96 W/kg
SAR(1 g) = 3.97 W/kg; SAR(10 g) = 2.06 W/kg
Deviation(1 g) = 0.25%; Deviation(10 g) = -1.44%
0 dB = 5.04 W/kg = 7.02 dBW/kg
B30
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d148
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body; Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.58 S/m; εr = 51.197; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-28-2018; Ambient Temp: 21.2°C; Tissue Temp: 20.8°C
Probe: ES3DV3 - SN3213; ConvF(4.88, 4.88, 4.88) @ 1900 MHz; Calibrated: 2/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1272; Calibrated: 2/9/2018
Phantom: SAM V5.0 Right; Type: QD000P40CD; Serial: 1647
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 6.92 W/kg
SAR(1 g) = 3.89 W/kg
Deviation(1 g) = -1.77%
0 dB = 4.94 W/kg = 6.94 dBW/kg
B31
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d080
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body; Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.577 S/m; εr = 52.302; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-02-2018; Ambient Temp: 21.9°C; Tissue Temp: 21.8°C
Probe: EX3DV4 - SN7409; ConvF(7.6, 7.6, 7.6) @ 1900 MHz; Calibrated: 6/25/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1334; Calibrated: 6/18/2018
Phantom: SAM with CRP v5.0 (Right); Type: QD000P40CD; Serial: TP:1759
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x11x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 7.87 W/kg
SAR(1 g) = 4.19 W/kg; SAR(10 g) = 2.14 W/kg
Deviation(1 g) = 6.89%; Deviation(10 g) = 3.88%
0 dB = 6.58 W/kg = 8.18 dBW/kg
B32
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: 5d148
Communication System: UID 0, CW; Frequency: 1900 MHz; Duty Cycle: 1:1
Medium: 1900 Body Medium parameters used (interpolated):
f = 1900 MHz; σ = 1.572 S/m; εr = 51.023; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-05-2018; Ambient Temp: 24.5°C; Tissue Temp: 23.3°C
Probe: ES3DV3 - SN3332; ConvF(4.77, 4.77, 4.77) @ 1900 MHz; Calibrated: 8/22/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1272; Calibrated: 2/9/2018
Phantom: SAM V5.0 Right; Type: QD000P40CD; Serial: 1647
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
1900 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm
Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm
Peak SAR (extrapolated) = 7.40 W/kg
SAR(1 g) = 4.15 W/kg
Deviation(1 g) = 4.80%
0 dB = 5.18 W/kg = 7.14 dBW/kg
B33
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2300 MHz; Type: D2300V2; Serial: 1073
Communication System: UID 0, CW; Frequency: 2300 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2300 MHz; σ = 1.871 S/m; εr = 51.484; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-14-2018; Ambient Temp: 21.9°C; Tissue Temp: 22.5°C
Probe: ES3DV3 - SN3319; ConvF(4.63, 4.63, 4.63) @ 2300 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2300 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 9.54 W/kg
SAR(1 g) = 4.85 W/kg; SAR(10 g) = 2.3 W/kg
Deviation(1 g) = 1.68%; Deviation(10 g) = -0.86%
0 dB = 6.35 W/kg = 8.03 dBW/kg
B34
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2300 MHz; Type: D2300V2; Serial: 1073
Communication System: UID 0, CW; Frequency: 2300 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2300 MHz; σ = 1.878 S/m; εr = 51.069; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-20-2018; Ambient Temp: 23.2°C; Tissue Temp: 23.5°C
Probe: ES3DV3 - SN3319; ConvF(4.63, 4.63, 4.63) @ 2300 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2300 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.0 W/kg
SAR(1 g) = 5.08 W/kg
Deviation(1 g) = 6.50%
0 dB = 6.54 W/kg = 8.16 dBW/kg
B35
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 719
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.033 S/m; εr = 52.107; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-12-2018; Ambient Temp: 22.7°C; Tissue Temp: 21.0°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.6 W/kg
SAR(1 g) = 5.13 W/kg
Deviation(1 g) = 2.40%
0 dB = 6.79 W/kg = 8.32 dBW/kg
B36
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 719
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.045 S/m; εr = 51.016; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-14-2018; Ambient Temp: 21.9°C; Tissue Temp: 22.5°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.7 W/kg
SAR(1 g) = 5.09 W/kg
Deviation(1 g) = 1.60%
0 dB = 6.75 W/kg = 8.29 dBW/kg
B37
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 797
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.03 S/m; εr = 51.031; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-17-2018; Ambient Temp: 24.9°C; Tissue Temp: 22.7°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.4 W/kg
SAR(1 g) = 4.94 W/kg; SAR(10 g) = 2.25 W/kg
Deviation(1 g) = -3.33%; Deviation(10 g) = -7.02%
0 dB = 6.48 W/kg = 8.12 dBW/kg
B38
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 797
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.036 S/m; εr = 50.942; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-29-2018; Ambient Temp: 22.6°C; Tissue Temp: 22.9°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 11.0 W/kg
SAR(1 g) = 5.26 W/kg
Deviation(1 g) = 2.94%
0 dB = 6.98 W/kg = 8.44 dBW/kg
B39
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 719
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.031 S/m; εr = 51.814; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-05-2018; Ambient Temp: 22.7°C; Tissue Temp: 21.3°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.8 W/kg
SAR(1 g) = 5.23 W/kg
Deviation(1 g) = 4.39%
0 dB = 6.88 W/kg = 8.38 dBW/kg
B40
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 719
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body; Medium parameters used:
f = 2450 MHz; σ = 2.028 S/m; εr = 51.398; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-27-2018; Ambient Temp: 22.5°C; Tissue Temp: 21.9°C
Probe: EX3DV4 - SN7406; ConvF(7.3, 7.3, 7.3) @ 2450 MHz; Calibrated: 5/22/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn859; Calibrated: 5/22/2018
Phantom: Twin-SAM V5.0 Back Right; Type: QD 000 P40 CD; Serial: 1692
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 11.1 W/kg
SAR(1 g) = 5.34 W/kg
Deviation(1 g) = 6.59%
0 dB = 8.93 W/kg = 9.51 dBW/kg
B41
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 981
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2450 MHz; σ = 2.039 S/m; εr = 51.588; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 01-14-2019; Ambient Temp: 22.3°C; Tissue Temp: 21.6°C
Probe: ES3DV3 - SN3319; ConvF(4.51, 4.51, 4.51) @ 2450 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2450 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 10.5 W/kg
SAR(10 g) = 2.27 W/kg
Deviation(10 g) = -6.20%
0 dB = 6.59 W/kg = 8.19 dBW/kg
B42
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: 1071
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2600 MHz; σ = 2.208 S/m; εr = 50.554; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-17-2018; Ambient Temp: 24.9°C; Tissue Temp: 22.7°C
Probe: ES3DV3 - SN3319; ConvF(4.33, 4.33, 4.33) @ 2600 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2600 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 11.2 W/kg
SAR(1 g) = 5.08 W/kg; SAR(10 g) = 2.23 W/kg
Deviation(1 g) = -6.27%; Deviation(10 g) = -8.98%
0 dB = 6.77 W/kg = 8.31 dBW/kg
B43
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: 1071
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2600 MHz; σ = 2.21 S/m; εr = 50.505; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-29-2018; Ambient Temp: 22.6°C; Tissue Temp: 22.9°C
Probe: ES3DV3 - SN3319; ConvF(4.33, 4.33, 4.33) @ 2600 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2600 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 12.5 W/kg
SAR(1 g) = 5.67 W/kg
Deviation(1 g) = 4.61%
0 dB = 7.49 W/kg = 8.74 dBW/kg
B44
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: 1126
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2600 MHz; σ = 2.203 S/m; εr = 51.338; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-05-2018; Ambient Temp: 22.7°C; Tissue Temp: 21.3°C
Probe: ES3DV3 - SN3319; ConvF(4.33, 4.33, 4.33) @ 2600 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2600 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 11.9 W/kg
SAR(1 g) = 5.45 W/kg
Deviation(1 g) = 0.74%
0 dB = 7.29 W/kg = 8.63 dBW/kg
B45
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: 1071
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2600 MHz; σ = 2.22 S/m; εr = 52.401; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 01-07-2019; Ambient Temp: 22.6°C; Tissue Temp: 21.6°C
Probe: ES3DV3 - SN3319; ConvF(4.33, 4.33, 4.33) @ 2600 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2600 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 12.2 W/kg
SAR(1 g) = 5.52 W/kg
Deviation(1 g) = 1.85%
0 dB = 7.32 W/kg = 8.65 dBW/kg
B46
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: 1004
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium: 2450 Body Medium parameters used:
f = 2600 MHz; σ = 2.208 S/m; εr = 51.169; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 01-14-2019; Ambient Temp: 22.3°C; Tissue Temp: 21.6°C
Probe: ES3DV3 - SN3319; ConvF(4.33, 4.33, 4.33) @ 2600 MHz; Calibrated: 3/13/2018
Sensor-Surface: 3mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1368; Calibrated: 3/7/2018
Phantom: LeftTwin-SAM V5.0; Type: QD 000 P40 CD; Serial: TP1375
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
2600 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Peak SAR (extrapolated) = 12.3 W/kg
SAR(10 g) = 2.41 W/kg
Deviation(10 g) = -2.43%
0 dB = 7.32 W/kg = 8.65 dBW/kg
B47
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 3700 MHz; Type: D3700V2; Serial: 1002
Communication System: UID 0, CW; Frequency: 3700 MHz; Duty Cycle: 1:1
Medium: 3700 Body Medium parameters used (interpolated):
f = 3700 MHz; σ = 3.412 S/m; εr = 50.772; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-27-2018; Ambient Temp: 22.8°C; Tissue Temp: 20.6°C
Probe: EX3DV4 - SN3914; ConvF(6.64, 6.64, 6.64) @ 3700 MHz; Calibrated: 2/14/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1558; Calibrated: 10/3/2018
Phantom: Twin-SAM V8.0; Type: QD 000 P41 Ax; Serial: 1966
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
3700 MHz System Verification at 20.0 dBm (100 mW)
Area Scan (8x9x1): Measurement grid: dx=12mm, dy=12mm
Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 18.2 W/kg
SAR(1 g) = 6.37 W/kg
Deviation(1 g) = -2.00%
0 dB = 12.7 W/kg = 11.04 dBW/kg
B48
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5250 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used (interpolated):
f = 5250 MHz; σ = 5.498 S/m; εr = 49.404; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-11-2018; Ambient Temp: 22.5°C; Tissue Temp: 21.7°C
Probe: EX3DV4 - SN7357; ConvF(4.78, 4.78, 4.78) @ 5250 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5250 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 14.3 W/kg
SAR(10 g) = 0.976 W/kg
Deviation(10 g) = -9.63%
0 dB = 8.56 W/kg = 9.32 dBW/kg
B49
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used:
f = 5600 MHz; σ = 5.957 S/m; εr = 48.81; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-11-2018; Ambient Temp: 22.5°C; Tissue Temp: 21.7°C
Probe: EX3DV4 - SN7357; ConvF(4.2, 4.2, 4.2) @ 5600 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5600 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 17.3 W/kg
SAR(10 g) = 1.08 W/kg
Deviation(10 g) = -2.70%
0 dB = 9.79 W/kg = 9.91 dBW/kg
B50
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5750 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used (interpolated):
f = 5750 MHz; σ = 6.174 S/m; εr = 48.581; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-11-2018; Ambient Temp: 22.5°C; Tissue Temp: 21.7°C
Probe: EX3DV4 - SN7357; ConvF(4.21, 4.21, 4.21) @ 5750 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5750 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 16.5 W/kg
SAR(10 g) = 0.990 W/kg
Deviation(10 g) = -6.60%
0 dB = 8.92 W/kg = 9.50 dBW/kg
B51
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5250 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used (interpolated):
f = 5250 MHz; σ = 5.413 S/m; εr = 48.971; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-18-2018; Ambient Temp: 23.0°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7357; ConvF(4.78, 4.78, 4.78) @ 5250 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5250 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 14.3 W/kg
SAR(1 g) = 3.54 W/kg
Deviation(1 g) = -8.05%
0 dB = 8.66 W/kg = 9.38 dBW/kg
B52
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used:
f = 5600 MHz; σ = 5.888 S/m; εr = 48.371; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-18-2018; Ambient Temp: 23.0°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7357; ConvF(4.2, 4.2, 4.2) @ 5600 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5600 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 16.9 W/kg
SAR(1 g) = 3.84 W/kg
Deviation(1 g) = -3.03%
0 dB = 9.29 W/kg = 9.68 dBW/kg
B53
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5750 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used (interpolated):
f = 5750 MHz; σ = 6.086 S/m; εr = 48.165; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 11-18-2018; Ambient Temp: 23.0°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7357; ConvF(4.21, 4.21, 4.21) @ 5750 MHz; Calibrated: 4/18/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1407; Calibrated: 4/11/2018
Phantom: SAM with CRP v5.0 Front; Type: QD000P40CD; Serial: 1646
Measurement SW: DASY52, Version 52.10;SEMCAD X Version 14.6.12 (7450)
5750 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 16.5 W/kg
SAR(1 g) = 3.6 W/kg
Deviation(1 g) = -5.39%
0 dB = 8.80 W/kg = 9.44 dBW/kg
B54
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used:
f = 5600 MHz; σ = 5.939 S/m; εr = 47.285; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-26-2018; Ambient Temp: 21.3°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7308; ConvF(4, 4, 4) @ 5600 MHz; Calibrated: 8/23/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1558; Calibrated: 10/3/2018
Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1630
Measurement SW: DASY52, Version 52.10; SEMCAD X Version 14.6.12 (7450)
5600 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 17.5 W/kg
SAR(1 g) = 3.89 W/kg
Deviation(1 g) = -1.77%
0 dB = 9.63 W/kg = 9.84 dBW/kg
B55
PCTEST ENGINEERING LABORATORY, INC.
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1191
Communication System: UID 0, CW; Frequency: 5750 MHz; Duty Cycle: 1:1
Medium: 5 GHz Body Medium parameters used (interpolated):
f = 5750 MHz; σ = 6.154 S/m; εr = 47.01; ρ = 1000 kg/m3
Phantom section: Flat Section; Space: 1.0 cm
Test Date: 12-26-2018; Ambient Temp: 21.3°C; Tissue Temp: 21.5°C
Probe: EX3DV4 - SN7308; ConvF(4.18, 4.18, 4.18) @ 5750 MHz; Calibrated: 8/23/2018
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1558; Calibrated: 10/3/2018
Phantom: Twin-SAM V5.0; Type: QD 000 P40 CD; Serial: 1630
Measurement SW: DASY52, Version 52.10; SEMCAD X Version 14.6.12 (7450)
5750 MHz System Verification at 17.0 dBm (50 mW)
Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm
Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm; Graded Ratio: 1.4
Peak SAR (extrapolated) = 16.1 W/kg
SAR(1 g) = 3.47 W/kg
Deviation(1 g) = -8.80%
0 dB = 8.59 W/kg = 9.34 dBW/kg
B56
APPENDIX C: PROBE CALIBRATION
© 2019 PCTEST Engineering Laboratory, Inc.
PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21046 USA
Tel. +1.410.290.6652 / Fax +1.410.290.6654
http://www.pctest.com
Certification of Calibration
Object
D1750V2 – SN: 1148
Calibration procedure(s)
Procedure for Calibration Extension for SAR Dipoles.
Extended Calibration date:
May 09, 2018
Description:
SAR Validation Dipole at 1750 MHz.
Calibration Equipment used:
Manufacturer
Model
Description
Cal Date
Cal Interval
Cal Due
Serial Number
Control Company
Control Company
Amplifier Research
Narda
Keysight
Keysight Technologies
Mini-Circuits
SPEAG
SPEAG
SPEAG
SPEAG
SPEAG
Anritsu
Anritsu
Agilent
Mini-Circuits
Pasternack
Agilent
Pasternack
Anritsu
4040
4352
15S1G6
4772-3
772D
85033E
BW-N20W5+
DAE4
DAE4
DAK-3.5
ES3DV3
ES3DV3
MA2411B
MA2411B
N5182A
NLP-2950+
PE2209-10
8753ES
NC-100
ML2495A
Therm./Clock/Humidity Monitor
Ultra Long Stem Thermometer
Amplifier
Attenuator (3dB)
Dual Directional Coupler
Standard Mechanical Calibration Kit (DC to 9GHz, 3.5mm)
DC to 18 GHz Precision Fixed 20 dB Attenuator
Dasy Data Acquisition Electronics
Dasy Data Acquisition Electronics
Dielectric Assessment Kit
SAR Probe
SAR Probe
Pulse Power Sensor
Pulse Power Sensor
MXG Vector Signal Generator
Low Pass Filter DC to 2700 MHz
Bidirectional Coupler
S-Parameter Network Analyzer
Torque Wrench
Power Meter
3/31/2017
5/2/2017
CBT
CBT
CBT
6/1/2017
CBT
2/9/2018
6/21/2017
9/12/2017
9/18/2017
2/13/2018
3/2/2018
3/2/2018
4/18/2018
CBT
CBT
9/14/2017
4/18/2018
10/22/2017
Biennial
Biennial
N/A
N/A
N/A
Annual
N/A
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
N/A
N/A
Annual
Annual
Annual
3/31/2019
5/2/2019
CBT
CBT
CBT
6/1/2018
CBT
2/9/2019
6/21/2018
9/12/2018
9/18/2018
2/13/2019
3/2/2019
3/2/2019
4/18/2019
CBT
CBT
9/14/2018
4/18/2019
10/22/2018
170232394
170330156
433971
9406
MY52180215
MY53401181
N/A
1272
1333
1091
3287
3213
1207364
1339018
MY47420800
N/A
N/A
US39170118
1445
941001
Measurement Uncertainty = ±23% (k=2)
Name
Function
Calibrated By:
Brodie Halbfoster
Test Engineer
Approved By:
Kaitlin O’Keefe
Senior Technical
Manager
Object:
Date Issued:
D1750V2 – SN: 1148
05/09/2018
Signature
Page 1 of 4
DIPOLE CALIBRATION EXTENSION
Per KDB 865664 D01, calibration intervals of up to three years may be considered for reference dipoles
when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained
stable according to the following requirements:
1. The measured SAR does not deviate more than 10% from the target on the calibration
certificate.
2. The return-loss does not deviate more than 20% from the previous measurement and meets the
required 20dB minimum return-loss requirement.
3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from
the previous measurement.
The following dipole was checked to pass the above 3 requirements to have 2-year calibration period
from the calibration date:
Certificate
Electrical
Delay (ns)
Calibration
Date
Extension Date
5/9/2017
5/9/2018
1.223
Calibration
Date
Extension Date
Certificate
Electrical
Delay (ns)
5/9/2017
5/9/2018
1.223
Certificate
Measured
SAR Target
Head SAR (1g)
Head (1g)
W/kg @ 20.0
W/kg @ 20.0
dBm
dBm
3.64
3.59
Certificate
Measured
SAR Target
Body SAR (1g)
Body (1g)
W/kg @ 20.0
W/kg @ 20.0
dBm
dBm
3.7
3.88
Deviation 1g
(%)
-1.37%
Deviation 1g
(%)
4.86%
Certificate
Measured
SAR Target
Head SAR
Deviation 10g
Head (10g)
(10g) W/kg @
(%)
W/kg @ 20.0
20.0 dBm
dBm
1.93
1.91
-1.04%
Certificate
Measured
SAR Target
Body SAR
Deviation 10g
Body (10g)
(10g) W/kg @
(%)
W/kg @ 20.0
20.0 dBm
dBm
1.98
2.06
4.04%
Object:
Date Issued:
D1750V2 – SN: 1148
05/09/2018
Certificate
Impedance
Head (Ohm)
Real
Measured
Impedance
Head (Ohm)
Real
Difference
(Ohm) Real
Certificate
Impedance
Head (Ohm)
Imaginary
Measured
Impedance
Head (Ohm)
Imaginary
Difference
(Ohm)
Imaginary
Certificate
Return Loss
Head (dB)
Measured
Return Loss
Head (dB)
Deviation (%)
PASS/FAIL
49.8
49.0
0.8
-0.7
0.1
0.8
-42.9
-38.7
9.90%
PASS
Certificate
Impedance
Body (Ohm)
Real
Measured
Impedance
Body (Ohm)
Real
Difference
(Ohm) Real
Certificate
Impedance
Body (Ohm)
Imaginary
Measured
Impedance
Body (Ohm)
Imaginary
Difference
(Ohm)
Imaginary
Certificate
Return Loss
Body (dB)
Measured
Return Loss
Body (dB)
Deviation (%)
PASS/FAIL
45.7
45.4
0.3
-0.5
-2.6
2.1
-26.9
-25.0
7.20%
PASS
Page 2 of 4
Impedance & Return-Loss Measurement Plot for Head TSL
Object:
Date Issued:
D1750V2 – SN: 1148
05/09/2018
Page 3 of 4
Impedance & Return-Loss Measurement Plot for Body TSL
Object:
Date Issued:
D1750V2 – SN: 1148
05/09/2018
Page 4 of 4
PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21046 USA
Tel. +1.410.290.6652 / Fax +1.410.290.6654
http://www.pctest.com
Certification of Calibration
Object
D2450V2 – SN: 719
Calibration procedure(s)
Procedure for Calibration Extension for SAR Dipoles.
Extended Calibration date:
07/18/2018
Description:
SAR Validation Dipole at 2450 MHz.
Calibration Equipment used:
Manufacturer
Model
Description
Cal Date
Cal Interval
Cal Due
Serial Number
Agilent
Agilent
Amplifier Research
Anritsu
Anritsu
Anritsu
Control Company
Control Company
Keysight
Keysight Technologies
Mini-Circuits
Mini-Circuits
Narda
Pasternack
Pasternack
SPEAG
SPEAG
SPEAG
SPEAG
SPEAG
E4438C
8753ES
15S1G6
ML2495A
MA2411B
MA2411B
4040
4352
772D
85033E
BW-N20W5+
NLP-2950+
4772-3
PE2209-10
PE5011-1
DAE4
DAE4
DAK-3.5
ES3DV3
ES3DV3
ESG Vector Signal Generator
S-Parameter Network Analyzer
Amplifier
Power Meter
Pulse Power Sensor
Pulse Power Sensor
Therm./Clock/Humidity Monitor
Ultra Long Stem Thermometer
Dual Directional Coupler
Standard Mechanical Calibration Kit (DC to 9GHz, 3.5mm)
DC to 18 GHz Precision Fixed 20 dB Attenuator
Low Pass Filter DC to 2700 MHz
Attenuator (3dB)
Bidirectional Coupler
Torque Wrench
Dasy Data Acquisition Electronics
Dasy Data Acquisition Electronics
Dielectric Assessment Kit
SAR Probe
SAR Probe
3/24/2017
9/14/2017
CBT
11/28/2017
3/2/2018
11/15/2017
3/31/2017
5/2/2017
CBT
6/4/2018
CBT
CBT
CBT
CBT
7/19/2017
3/7/2018
8/9/2017
9/12/2017
3/13/2018
8/14/2017
Biennial
Annual
N/A
Annual
Annual
Annual
Biennial
Biennial
N/A
Annual
N/A
N/A
N/A
N/A
Biennial
Annual
Annual
Annual
Annual
Annual
3/24/2019
9/14/2018
CBT
11/28/2018
3/2/2019
11/15/2018
3/31/2019
5/2/2019
CBT
6/4/2019
CBT
CBT
CBT
CBT
7/19/2019
3/7/2019
8/9/2018
9/12/2018
3/13/2019
8/14/2018
MY42082385
US39170118
433971
1039008
1207364
1339007
170232394
170330156
MY52180215
MY53401181
N/A
N/A
9406
N/A
N/A
1368
1323
1091
3319
3332
Measurement Uncertainty = ±23% (k=2)
Name
Function
Calibrated By:
Brodie Halbfoster
Test Engineer
Approved By:
Kaitlin O’Keefe
Senior Technical
Manager
Object:
Date Issued:
D2450V2 – SN: 719
07/18/2018
Signature
Page 1 of 4
DIPOLE CALIBRATION EXTENSION
Per KDB 865664 D01, calibration intervals of up to three years may be considered for reference dipoles
when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained
stable according to the following requirements:
1. The measured SAR does not deviate more than 10% from the target on the calibration
certificate.
2. The return-loss does not deviate more than 20% from the previous measurement and meets the
required 20dB minimum return-loss requirement.
3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from
the previous measurement.
The following dipole was checked to pass the above 3 requirements to have 2-year calibration period
from the calibration date:
Certificate
Electrical
Delay (ns)
Calibration
Date
Extension Date
8/17/2017
7/18/2018
1.150
Calibration
Date
Extension Date
Certificate
Electrical
Delay (ns)
8/17/2017
7/18/2018
1.150
Certificate
Measured
SAR Target
Head SAR (1g)
Head (1g)
W/kg @ 20.0
W/kg @ 20.0
dBm
dBm
5.19
5.46
Certificate
Measured
SAR Target
Body SAR (1g)
Body (1g)
W/kg @ 20.0
W/kg @ 20.0
dBm
dBm
5.01
5.19
Deviation 1g
(%)
5.20%
Deviation 1g
(%)
3.59%
Certificate
Measured
SAR Target
Head SAR
Deviation 10g
Head (10g)
(10g) W/kg @
(%)
W/kg @ 20.0
20.0 dBm
dBm
2.43
2.51
3.29%
Certificate
Measured
SAR Target
Body SAR
Deviation 10g
Body (10g)
(10g) W/kg @
(%)
W/kg @ 20.0
20.0 dBm
dBm
2.37
2.38
0.42%
Object:
Date Issued:
D2450V2 – SN: 719
07/18/2018
Certificate
Impedance
Head (Ohm)
Real
Measured
Impedance
Head (Ohm)
Real
Difference
(Ohm) Real
Certificate
Impedance
Head (Ohm)
Imaginary
Measured
Impedance
Head (Ohm)
Imaginary
Difference
(Ohm)
Imaginary
Certificate
Return Loss
Head (dB)
Measured
Return Loss
Head (dB)
Deviation (%)
PASS/FAIL
55.7
53.9
1.8
7.0
2.9
4.1
-21.4
-25.4
-18.70%
PASS
Certificate
Impedance
Body (Ohm)
Real
Measured
Impedance
Body (Ohm)
Real
Difference
(Ohm) Real
Certificate
Impedance
Body (Ohm)
Imaginary
Measured
Impedance
Body (Ohm)
Imaginary
Difference
(Ohm)
Imaginary
Certificate
Return Loss
Body (dB)
Measured
Return Loss
Body (dB)
Deviation (%)
PASS/FAIL
51.4
50.2
1.2
8.1
5.9
2.2
-21.8
-24.6
-12.80%
PASS
Page 2 of 4
Impedance & Return-Loss Measurement Plot for Head TSL
Object:
Date Issued:
D2450V2 – SN: 719
07/18/2018
Page 3 of 4
Impedance & Return-Loss Measurement Plot for Body TSL
Object:
Date Issued:
D2450V2 – SN: 719
07/18/2018
Page 4 of 4

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2019:01:31 09:11:15-05:00
Creator                         : Microsoft® Word for Office 365
Modify Date                     : 2019:01:31 09:12:28-05:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2019:01:31 09:12:28-05:00
Creator Tool                    : Microsoft® Word for Office 365
Format                          : application/pdf
Document ID                     : uuid:c3fe0dbc-5e59-4468-a7ec-78dad2d7a41e
Instance ID                     : uuid:e934ac47-1885-4e8f-9912-eebf5e10cc8b
Producer                        : Microsoft® Word for Office 365
Page Count                      : 214