APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company

Hewlett Packard Enterprise Company ACCESS POINT

Page 1 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 2 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 3 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 4 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 5 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 6 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 7 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 8 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 9 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 10 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 11 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 12 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 13 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 14 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 15 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 16 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 17 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 18 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 19 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 20 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 21 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 22 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 23 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 24 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 25 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 26 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 27 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 28 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 29 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 30 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 31 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 32 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 33 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 34 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 35 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 36 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 37 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 38 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 39 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 40 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 41 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 42 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 43 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 44 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 45 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 46 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 47 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 48 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 49 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 50 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 51 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 52 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 53 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 54 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 55 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 56 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 57 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 58 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 59 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 60 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 61 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 62 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 63 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 64 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 65 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 66 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 67 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 68 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 69 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 70 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 71 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 72 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 73 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 74 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 75 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 76 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 77 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 78 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 79 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 80 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 81 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 82 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 83 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 84 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 85 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 86 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 87 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 88 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 89 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 90 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 91 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 92 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 93 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 94 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 95 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 96 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 97 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 98 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 99 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 100 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 101 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 102 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 103 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 104 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 105 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 106 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 107 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 108 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 109 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 110 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 111 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 112 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 113 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 114 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 115 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 116 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 117 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 118 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 119 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 120 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 121 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 122 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 123 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 124 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 125 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 126 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 127 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 128 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 129 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 130 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 131 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 132 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 133 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 134 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 135 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 136 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 137 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 138 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 139 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 140 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 141 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 142 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 143 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 144 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 145 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 146 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 147 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 148 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 149 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 150 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 151 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 152 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 153 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 154 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 155 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 156 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 157 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 158 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 159 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 160 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 161 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 162 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 163 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 164 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 165 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 166 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 167 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Page 168 of APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company

802.11ac-VHT40 Power Spectral Density - Ant 3 / Ant 0 + 1 + 2 + 3 (Beam-Forming Mode)
Channel 54 (5270MHz)
Channel 62 (5310MHz)
Channel 102 (5510MHz)
Channel 118 (5590MHz)
Channel 134 (5670MHz)
Channel 142 (5710MHz)
FCC ID: Q9DAPEX037457
Page Number: 100 of 356
802.11ac-VHT80 Power Spectral Density - Ant 3 / Ant 0 + 1 + 2 + 3 (Beam-Forming Mode)
Channel 58 (5290MHz)
Channel 106 (5530MHz)
Channel 122 (5610MHz)
Channel 138 (5690MHz)
FCC ID: Q9DAPEX037457
Page Number: 101 of 356
802.11ac-VHT80+80 Power Spectral Density - Ant 3 / Ant 2 + 3 (Ant 0 + 1 + 2 + 3)
(Beam-Forming Mode)
Channel 58 (5290MHz)
Channel 106 (5530MHz)
Channel 122 (5610MHz)
Channel 138 (5690MHz)
FCC ID: Q9DAPEX037457
Page Number: 102 of 356
4. Frequency Stability Measurement Test Result
Test Engineer
Kevin Ker
Temperature
-30 ~ 50°C
Test Time
2017/08/27
Relative Humidity
48 ~ 55%RH
Test Mode
5320MHz (Carrier Mode)
Test Site
SR2
Voltage
Power
Temp
Frequency Tolerance
(%)
(VAC)
(°C)
(ppm)
- 30
-4.60
- 20
-4.36
- 10
-2.01
-3.78
+ 10
-4.28
+ 20 (Ref)
-3.81
+ 30
-3.23
+ 40
-4.86
+ 50
-4.29
100%
120
115%
138
+ 20
-3.96
85%
102
+ 20
-3.95
Note: Frequency Tolerance (ppm) = {[Measured Frequency (Hz) - Declared Frequency (Hz)] /
Declared Frequency (Hz)} *106.
FCC ID: Q9DAPEX037457
Page Number: 103 of 356
5. Radiated Spurious Emission Measurement Test Result
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
52
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7817.0
33.6
12.4
46.0
68.2
-22.2
Peak
Horizontal
8879.5
31.8
14.0
45.8
68.2
-22.4
Peak
Horizontal
9423.5
30.4
14.5
44.9
74.0
-29.1
Peak
Horizontal
11480.5
32.2
19.3
51.5
74.0
-22.5
Peak
Horizontal
7868.0
32.8
12.4
45.2
68.2
-23.0
Peak
Vertical
8811.5
32.0
14.0
46.0
68.2
-22.2
Peak
Vertical
9423.5
31.0
14.5
45.5
74.0
-28.5
Peak
Vertical
11591.0
32.0
19.5
51.5
74.0
-22.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 104 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
60
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
33.9
12.4
46.3
68.2
-21.9
Peak
Horizontal
8735.0
30.6
13.9
44.5
68.2
-23.7
Peak
Horizontal
9466.0
31.2
14.4
45.6
74.0
-28.4
Peak
Horizontal
11582.5
32.3
19.5
51.8
74.0
-22.2
Peak
Horizontal
7885.0
32.8
12.4
45.2
68.2
-23.0
Peak
Vertical
8837.0
31.8
14.0
45.8
68.2
-22.4
Peak
Vertical
9423.5
30.0
14.5
44.5
74.0
-29.5
Peak
Vertical
11591.0
31.3
19.5
50.8
74.0
-23.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 105 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
64
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7876.5
32.6
12.4
45.0
68.2
-23.2
Peak
Horizontal
8709.5
32.1
13.8
45.9
68.2
-22.3
Peak
Horizontal
9389.5
30.5
14.5
45.0
74.0
-29.0
Peak
Horizontal
11429.5
31.5
19.2
50.7
74.0
-23.3
Peak
Horizontal
7842.5
33.3
12.4
45.7
68.2
-22.5
Peak
Vertical
8879.5
32.1
14.0
46.1
68.2
-22.1
Peak
Vertical
9449.0
30.8
14.4
45.2
74.0
-28.8
Peak
Vertical
11174.5
31.6
18.7
50.3
74.0
-23.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 106 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
100
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
31.2
12.4
43.6
68.2
-24.6
Peak
Horizontal
8735.0
31.3
13.9
45.2
68.2
-23.0
Peak
Horizontal
9449.0
32.3
14.4
46.7
74.0
-27.3
Peak
Horizontal
11174.5
30.9
18.7
49.6
74.0
-24.4
Peak
Horizontal
7910.5
32.5
12.4
44.9
68.2
-23.3
Peak
Vertical
8777.5
29.6
13.9
43.5
68.2
-24.7
Peak
Vertical
9406.5
30.0
14.5
44.5
74.0
-29.5
Peak
Vertical
11174.5
31.9
18.7
50.6
74.0
-23.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 107 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
120
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7859.5
31.0
12.4
43.4
68.2
-24.8
Peak
Horizontal
8692.5
31.0
13.7
44.7
68.2
-23.5
Peak
Horizontal
9338.5
31.7
14.6
46.3
74.0
-27.7
Peak
Horizontal
11506.0
32.1
19.4
51.5
74.0
-22.5
Peak
Horizontal
7774.5
31.9
12.4
44.3
68.2
-23.9
Peak
Vertical
8675.5
31.8
13.7
45.5
68.2
-22.7
Peak
Vertical
9381.0
30.4
14.5
44.9
74.0
-29.1
Peak
Vertical
11608.0
31.6
19.4
51.0
74.0
-23.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 108 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
140
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7800.0
32.8
12.4
45.2
68.2
-23.0
Peak
Horizontal
8811.5
31.2
14.0
45.2
68.2
-23.0
Peak
Horizontal
9423.5
31.5
14.5
46.0
74.0
-28.0
Peak
Horizontal
11565.5
31.6
19.5
51.1
74.0
-22.9
Peak
Horizontal
7817.0
31.2
12.4
43.6
68.2
-24.6
Peak
Vertical
8811.5
31.9
14.0
45.9
68.2
-22.3
Peak
Vertical
9304.5
29.9
14.7
44.6
74.0
-29.4
Peak
Vertical
11616.5
31.9
19.4
51.3
74.0
-22.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 109 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
144
Test Mode:
Remark:
802.11a - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7825.5
32.5
12.4
44.9
68.2
-23.3
Peak
Horizontal
8794.5
30.0
13.9
43.9
68.2
-24.3
Peak
Horizontal
9423.5
30.4
14.5
44.9
74.0
-29.1
Peak
Horizontal
11548.5
31.5
19.4
50.9
74.0
-23.1
Peak
Horizontal
7808.5
32.5
12.4
44.9
68.2
-23.3
Peak
Vertical
8888.0
30.6
14.0
44.6
68.2
-23.6
Peak
Vertical
9474.5
30.1
14.4
44.5
74.0
-29.5
Peak
Vertical
11497.5
31.1
19.3
50.4
74.0
-23.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 110 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
52
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7851.0
33.4
12.4
45.8
68.2
-22.4
Peak
Horizontal
8735.0
30.4
13.9
44.3
68.2
-23.9
Peak
Horizontal
9338.5
31.8
14.6
46.4
74.0
-27.6
Peak
Horizontal
11599.5
31.6
19.4
51.0
74.0
-23.0
Peak
Horizontal
7876.5
32.1
12.4
44.5
68.2
-23.7
Peak
Vertical
8769.0
30.4
13.9
44.3
68.2
-23.9
Peak
Vertical
9398.0
31.5
14.5
46.0
74.0
-28.0
Peak
Vertical
11625.0
31.0
19.4
50.4
74.0
-23.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 111 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
60
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7919.0
32.4
12.4
44.8
68.2
-23.4
Peak
Horizontal
8624.5
32.8
13.5
46.3
68.2
-21.9
Peak
Horizontal
9466.0
32.3
14.4
46.7
74.0
-27.3
Peak
Horizontal
11591.0
32.6
19.5
52.1
74.0
-21.9
Peak
Horizontal
7774.5
32.3
12.4
44.7
68.2
-23.5
Peak
Vertical
8735.0
31.8
13.9
45.7
68.2
-22.5
Peak
Vertical
9338.5
30.9
14.6
45.5
74.0
-28.5
Peak
Vertical
11489.0
31.5
19.3
50.8
74.0
-23.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 112 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
64
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
31.6
12.4
44.0
68.2
-24.2
Peak
Horizontal
8582.0
32.0
13.4
45.4
68.2
-22.8
Peak
Horizontal
9381.0
30.9
14.5
45.4
74.0
-28.6
Peak
Horizontal
11523.0
31.2
19.4
50.6
74.0
-23.4
Peak
Horizontal
7876.5
32.3
12.4
44.7
68.2
-23.5
Peak
Vertical
8820.0
30.4
14.0
44.4
68.2
-23.8
Peak
Vertical
9398.0
31.6
14.5
46.1
74.0
-27.9
Peak
Vertical
11480.5
32.3
19.3
51.6
74.0
-22.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 113 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
100
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7902.0
31.8
12.4
44.2
68.2
-24.0
Peak
Horizontal
8616.0
32.7
13.5
46.2
68.2
-22.0
Peak
Horizontal
9338.5
30.5
14.6
45.1
74.0
-28.9
Peak
Horizontal
11497.5
31.7
19.3
51.0
74.0
-23.0
Peak
Horizontal
7910.5
31.3
12.4
43.7
68.2
-24.5
Peak
Vertical
8803.0
30.0
14.0
44.0
68.2
-24.2
Peak
Vertical
9466.0
30.8
14.4
45.2
74.0
-28.8
Peak
Vertical
11591.0
31.0
19.5
50.5
74.0
-23.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 114 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
120
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7834.0
32.6
12.4
45.0
68.2
-23.2
Peak
Horizontal
8769.0
30.6
13.9
44.5
68.2
-23.7
Peak
Horizontal
9381.0
30.6
14.5
45.1
74.0
-28.9
Peak
Horizontal
11523.0
31.7
19.4
51.1
74.0
-22.9
Peak
Horizontal
7876.5
31.9
12.4
44.3
68.2
-23.9
Peak
Vertical
8777.5
29.2
13.9
43.1
68.2
-25.1
Peak
Vertical
9381.0
29.5
14.5
44.0
74.0
-30.0
Peak
Vertical
11489.0
30.8
19.3
50.1
74.0
-23.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 115 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
140
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7876.5
31.0
12.4
43.4
68.2
-24.8
Peak
Horizontal
8743.5
31.7
13.9
45.6
68.2
-22.6
Peak
Horizontal
9423.5
32.2
14.5
46.7
74.0
-27.3
Peak
Horizontal
11115.0
32.3
18.6
50.9
74.0
-23.1
Peak
Horizontal
7876.5
30.9
12.4
43.3
68.2
-24.9
Peak
Vertical
8871.0
31.4
14.0
45.4
68.2
-22.8
Peak
Vertical
9381.0
30.9
14.5
45.4
74.0
-28.6
Peak
Vertical
11565.5
31.5
19.5
51.0
74.0
-23.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 116 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
144
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7893.5
30.8
12.4
43.2
68.2
-25.0
Peak
Horizontal
8794.5
30.1
13.9
44.0
68.2
-24.2
Peak
Horizontal
9415.0
30.6
14.5
45.1
74.0
-28.9
Peak
Horizontal
10911.0
32.4
18.4
50.8
74.0
-23.2
Peak
Horizontal
7859.5
31.8
12.4
44.2
68.2
-24.0
Peak
Vertical
8794.5
30.3
13.9
44.2
68.2
-24.0
Peak
Vertical
9474.5
30.0
14.4
44.4
74.0
-29.6
Peak
Vertical
10919.5
31.4
18.4
49.8
74.0
-24.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 117 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
54
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7961.5
33.1
12.5
45.6
68.2
-22.6
Peak
Horizontal
8879.5
31.5
14.0
45.5
68.2
-22.7
Peak
Horizontal
9355.5
30.9
14.5
45.4
74.0
-28.6
Peak
Horizontal
11676.0
31.7
19.2
50.9
74.0
-23.1
Peak
Horizontal
7885.0
31.5
12.4
43.9
68.2
-24.3
Peak
Vertical
8947.5
32.6
14.0
46.6
68.2
-21.6
Peak
Vertical
9466.0
31.4
14.4
45.8
74.0
-28.2
Peak
Vertical
11506.0
31.6
19.4
51.0
74.0
-23.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 118 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
62
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7817.0
33.3
12.4
45.7
68.2
-22.5
Peak
Horizontal
8735.0
31.5
13.9
45.4
68.2
-22.8
Peak
Horizontal
9304.5
30.4
14.7
45.1
74.0
-28.9
Peak
Horizontal
11506.0
31.8
19.4
51.2
74.0
-22.8
Peak
Horizontal
7808.5
31.1
12.4
43.5
68.2
-24.7
Peak
Vertical
8973.0
31.2
14.1
45.3
68.2
-22.9
Peak
Vertical
9466.0
32.5
14.4
46.9
74.0
-27.1
Peak
Vertical
11480.5
31.1
19.3
50.4
74.0
-23.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 119 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
102
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
32.6
12.4
45.0
68.2
-23.2
Peak
Horizontal
8735.0
32.4
13.9
46.3
68.2
-21.9
Peak
Horizontal
9423.5
31.6
14.5
46.1
74.0
-27.9
Peak
Horizontal
11412.5
32.1
19.1
51.2
74.0
-22.8
Peak
Horizontal
7893.5
32.7
12.4
45.1
68.2
-23.1
Peak
Vertical
8633.0
31.7
13.5
45.2
68.2
-23.0
Peak
Vertical
9466.0
30.4
14.4
44.8
74.0
-29.2
Peak
Vertical
11463.5
31.3
19.3
50.6
74.0
-23.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 120 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
118
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
31.6
12.4
44.0
68.2
-24.2
Peak
Horizontal
8769.0
30.4
13.9
44.3
68.2
-23.9
Peak
Horizontal
9474.5
31.7
14.4
46.1
74.0
-27.9
Peak
Horizontal
11633.5
31.4
19.4
50.8
74.0
-23.2
Peak
Horizontal
7808.5
32.5
12.4
44.9
68.2
-23.3
Peak
Vertical
8811.5
30.6
14.0
44.6
68.2
-23.6
Peak
Vertical
9423.5
30.7
14.5
45.2
74.0
-28.8
Peak
Vertical
11523.0
31.4
19.4
50.8
74.0
-23.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 121 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
134
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7783.0
33.4
12.4
45.8
68.2
-22.4
Peak
Horizontal
8692.5
31.9
13.7
45.6
68.2
-22.6
Peak
Horizontal
9330.0
31.0
14.6
45.6
74.0
-28.4
Peak
Horizontal
11506.0
31.8
19.4
51.2
74.0
-22.8
Peak
Horizontal
7885.0
31.3
12.4
43.7
68.2
-24.5
Peak
Vertical
8820.0
30.6
14.0
44.6
68.2
-23.6
Peak
Vertical
9440.5
31.1
14.4
45.5
74.0
-28.5
Peak
Vertical
11531.5
30.3
19.4
49.7
74.0
-24.3
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 122 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
142
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7885.0
31.3
12.4
43.7
68.2
-24.5
Peak
Horizontal
8735.0
30.0
13.9
43.9
68.2
-24.3
Peak
Horizontal
9474.5
30.7
14.4
45.1
74.0
-28.9
Peak
Horizontal
11480.5
30.9
19.3
50.2
74.0
-23.8
Peak
Horizontal
7910.5
31.3
12.4
43.7
68.2
-24.5
Peak
Vertical
8913.5
32.6
14.0
46.6
68.2
-21.6
Peak
Vertical
9389.5
30.6
14.5
45.1
74.0
-28.9
Peak
Vertical
11582.5
31.9
19.5
51.4
74.0
-22.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 123 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
52
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7808.5
31.6
12.4
44.0
68.2
-24.2
Peak
Horizontal
8803.0
31.9
14.0
45.9
68.2
-22.3
Peak
Horizontal
9389.5
31.6
14.5
46.1
74.0
-27.9
Peak
Horizontal
11642.0
31.6
19.4
51.0
74.0
-23.0
Peak
Horizontal
7885.0
32.8
12.4
45.2
68.2
-23.0
Peak
Vertical
8871.0
33.7
14.0
47.7
68.2
-20.5
Peak
Vertical
9381.0
30.1
14.5
44.6
74.0
-29.4
Peak
Vertical
11548.5
30.8
19.4
50.2
74.0
-23.8
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 124 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
60
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7842.5
32.9
12.4
45.3
68.2
-22.9
Peak
Horizontal
8692.5
33.0
13.7
46.7
68.2
-21.5
Peak
Horizontal
9338.5
31.3
14.6
45.9
74.0
-28.1
Peak
Horizontal
11514.5
31.4
19.4
50.8
74.0
-23.2
Peak
Horizontal
7808.5
31.6
12.4
44.0
68.2
-24.2
Peak
Vertical
8854.0
30.0
14.0
44.0
68.2
-24.2
Peak
Vertical
9432.0
30.4
14.4
44.8
74.0
-29.2
Peak
Vertical
11599.5
30.7
19.4
50.1
74.0
-23.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 125 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
64
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7842.5
31.5
12.4
43.9
68.2
-24.3
Peak
Horizontal
8624.5
32.1
13.5
45.6
68.2
-22.6
Peak
Horizontal
9406.5
31.5
14.5
46.0
74.0
-28.0
Peak
Horizontal
11446.5
31.8
19.2
51.0
74.0
-23.0
Peak
Horizontal
7851.0
32.8
12.4
45.2
68.2
-23.0
Peak
Vertical
8769.0
29.6
13.9
43.5
68.2
-24.7
Peak
Vertical
9491.5
31.5
14.4
45.9
74.0
-28.1
Peak
Vertical
11523.0
31.7
19.4
51.1
74.0
-22.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 126 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
100
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7825.5
31.8
12.4
44.2
68.2
-24.0
Peak
Horizontal
8641.5
33.0
13.5
46.5
68.2
-21.7
Peak
Horizontal
9406.5
30.7
14.5
45.2
74.0
-28.8
Peak
Horizontal
11506.0
31.9
19.4
51.3
74.0
-22.7
Peak
Horizontal
7851.0
32.7
12.4
45.1
68.2
-23.1
Peak
Vertical
8811.5
32.5
14.0
46.5
68.2
-21.7
Peak
Vertical
9466.0
30.3
14.4
44.7
74.0
-29.3
Peak
Vertical
11480.5
31.2
19.3
50.5
74.0
-23.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 127 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
120
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7876.5
31.3
12.4
43.7
68.2
-24.5
Peak
Horizontal
8862.5
31.6
14.0
45.6
68.2
-22.6
Peak
Horizontal
9432.0
31.5
14.4
45.9
74.0
-28.1
Peak
Horizontal
11506.0
31.8
19.4
51.2
74.0
-22.8
Peak
Horizontal
7783.0
32.7
12.4
45.1
68.2
-23.1
Peak
Vertical
8786.0
30.3
13.9
44.2
68.2
-24.0
Peak
Vertical
9474.5
32.5
14.4
46.9
74.0
-27.1
Peak
Vertical
11480.5
31.2
19.3
50.5
74.0
-23.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 128 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
140
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7791.5
31.5
12.4
43.9
68.2
-24.3
Peak
Horizontal
8692.5
30.7
13.7
44.4
68.2
-23.8
Peak
Horizontal
9440.5
30.7
14.4
45.1
74.0
-28.9
Peak
Horizontal
11599.5
31.8
19.4
51.2
74.0
-22.8
Peak
Horizontal
7783.0
32.5
12.4
44.9
68.2
-23.3
Peak
Vertical
8879.5
31.7
14.0
45.7
68.2
-22.5
Peak
Vertical
9449.0
32.0
14.4
46.4
74.0
-27.6
Peak
Vertical
11480.5
32.1
19.3
51.4
74.0
-22.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 129 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
144
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7825.5
33.3
12.4
45.7
68.2
-22.5
Peak
Horizontal
8811.5
30.4
14.0
44.4
68.2
-23.8
Peak
Horizontal
9372.5
32.9
14.5
47.4
74.0
-26.6
Peak
Horizontal
11633.5
31.8
19.4
51.2
74.0
-22.8
Peak
Horizontal
7791.5
33.5
12.4
45.9
68.2
-22.3
Peak
Vertical
8820.0
30.1
14.0
44.1
68.2
-24.1
Peak
Vertical
9423.5
30.0
14.5
44.5
74.0
-29.5
Peak
Vertical
11463.5
31.1
19.3
50.4
74.0
-23.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 130 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
54
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7817.0
33.0
12.4
45.4
68.2
-22.8
Peak
Horizontal
8658.5
31.5
13.6
45.1
68.2
-23.1
Peak
Horizontal
9423.5
31.0
14.5
45.5
74.0
-28.5
Peak
Horizontal
11557.0
32.0
19.5
51.5
74.0
-22.5
Peak
Horizontal
7944.5
33.2
12.5
45.7
68.2
-22.5
Peak
Vertical
8879.5
30.9
14.0
44.9
68.2
-23.3
Peak
Vertical
9449.0
31.8
14.4
46.2
74.0
-27.8
Peak
Vertical
11591.0
31.0
19.5
50.5
74.0
-23.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 131 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
62
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7868.0
31.1
12.4
43.5
68.2
-24.7
Peak
Horizontal
8718.0
30.3
13.8
44.1
68.2
-24.1
Peak
Horizontal
9313.0
30.5
14.7
45.2
74.0
-28.8
Peak
Horizontal
11480.5
31.9
19.3
51.2
74.0
-22.8
Peak
Horizontal
7842.5
31.2
12.4
43.6
68.2
-24.6
Peak
Vertical
8769.0
29.7
13.9
43.6
68.2
-24.6
Peak
Vertical
9449.0
30.2
14.4
44.6
74.0
-29.4
Peak
Vertical
11616.5
30.8
19.4
50.2
74.0
-23.8
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 132 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
102
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7834.0
33.7
12.4
46.1
68.2
-22.1
Peak
Horizontal
8658.5
31.0
13.6
44.6
68.2
-23.6
Peak
Horizontal
9398.0
30.9
14.5
45.4
74.0
-28.6
Peak
Horizontal
11455.0
32.3
19.2
51.5
74.0
-22.5
Peak
Horizontal
7876.5
32.7
12.4
45.1
68.2
-23.1
Peak
Vertical
8896.5
32.0
14.0
46.0
68.2
-22.2
Peak
Vertical
9381.0
32.3
14.5
46.8
74.0
-27.2
Peak
Vertical
11455.0
31.5
19.2
50.7
74.0
-23.3
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 133 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
118
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7868.0
31.8
12.4
44.2
68.2
-24.0
Peak
Horizontal
8777.5
31.1
13.9
45.0
68.2
-23.2
Peak
Horizontal
9466.0
30.6
14.4
45.0
74.0
-29.0
Peak
Horizontal
11642.0
31.6
19.4
51.0
74.0
-23.0
Peak
Horizontal
7825.5
32.9
12.4
45.3
68.2
-22.9
Peak
Vertical
8879.5
32.3
14.0
46.3
68.2
-21.9
Peak
Vertical
9466.0
30.4
14.4
44.8
74.0
-29.2
Peak
Vertical
11667.5
31.2
19.3
50.5
74.0
-23.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 134 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
134
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7834.0
34.0
12.4
46.4
68.2
-21.8
Peak
Horizontal
8650.0
33.6
13.6
47.2
68.2
-21.0
Peak
Horizontal
9338.5
33.2
14.6
47.8
74.0
-26.2
Peak
Horizontal
11616.5
31.7
19.4
51.1
74.0
-22.9
Peak
Horizontal
7953.0
33.4
12.5
45.9
68.2
-22.3
Peak
Vertical
8777.5
30.4
13.9
44.3
68.2
-23.9
Peak
Vertical
9415.0
30.3
14.5
44.8
74.0
-29.2
Peak
Vertical
11514.5
31.8
19.4
51.2
74.0
-22.8
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 135 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
142
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7834.0
34.0
12.4
46.4
68.2
-21.8
Peak
Horizontal
8862.5
32.5
14.0
46.5
68.2
-21.7
Peak
Horizontal
9474.5
31.5
14.4
45.9
74.0
-28.1
Peak
Horizontal
10979.0
32.3
18.5
50.8
74.0
-23.2
Peak
Horizontal
7774.5
33.4
12.4
45.8
68.2
-22.4
Peak
Vertical
8905.0
32.4
14.0
46.4
68.2
-21.8
Peak
Vertical
9321.5
32.1
14.6
46.7
74.0
-27.3
Peak
Vertical
11582.5
32.9
19.5
52.4
74.0
-21.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 136 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7791.5
33.1
12.4
45.5
68.2
-22.7
Peak
Horizontal
8650.0
33.1
13.6
46.7
68.2
-21.5
Peak
Horizontal
9338.5
33.1
14.6
47.7
74.0
-26.3
Peak
Horizontal
11149.0
32.2
18.7
50.9
74.0
-23.1
Peak
Horizontal
7893.5
31.9
12.4
44.3
68.2
-23.9
Peak
Vertical
8692.5
31.7
13.7
45.4
68.2
-22.8
Peak
Vertical
9466.0
31.6
14.4
46.0
74.0
-28.0
Peak
Vertical
11582.5
30.8
19.5
50.3
74.0
-23.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 137 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7791.5
32.8
12.4
45.2
68.2
-23.0
Peak
Horizontal
8658.5
31.1
13.6
44.7
68.2
-23.5
Peak
Horizontal
9389.5
30.6
14.5
45.1
74.0
-28.9
Peak
Horizontal
11608.0
31.3
19.4
50.7
74.0
-23.3
Peak
Horizontal
7876.5
31.7
12.4
44.1
68.2
-24.1
Peak
Vertical
8786.0
30.8
13.9
44.7
68.2
-23.5
Peak
Vertical
9398.0
31.5
14.5
46.0
74.0
-28.0
Peak
Vertical
11404.0
32.2
19.1
51.3
74.0
-22.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 138 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7842.5
31.9
12.4
44.3
68.2
-23.9
Peak
Horizontal
8769.0
30.4
13.9
44.3
68.2
-23.9
Peak
Horizontal
9432.0
31.9
14.4
46.3
74.0
-27.7
Peak
Horizontal
10970.5
32.5
18.4
50.9
74.0
-23.1
Peak
Horizontal
7851.0
33.1
12.4
45.5
68.2
-22.7
Peak
Vertical
8803.0
31.4
14.0
45.4
68.2
-22.8
Peak
Vertical
9381.0
31.1
14.5
45.6
74.0
-28.4
Peak
Vertical
11030.0
31.5
18.5
50.0
74.0
-24.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 139 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7851.0
33.1
12.4
45.5
68.2
-22.7
Peak
Horizontal
8616.0
31.3
13.5
44.8
68.2
-23.4
Peak
Horizontal
9381.0
31.6
14.5
46.1
74.0
-27.9
Peak
Horizontal
11506.0
31.5
19.4
50.9
74.0
-23.1
Peak
Horizontal
7825.5
32.4
12.4
44.8
68.2
-23.4
Peak
Vertical
8786.0
30.8
13.9
44.7
68.2
-23.5
Peak
Vertical
9381.0
31.2
14.5
45.7
74.0
-28.3
Peak
Vertical
11667.5
29.8
19.3
49.1
74.0
-24.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 140 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 0 + 1 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7570.5
33.2
12.8
46.0
74.0
-28.0
Peak
Horizontal
11548.5
31.9
19.4
51.3
74.0
-22.7
Peak
Horizontal
13027.5
31.6
19.9
51.5
68.2
-16.7
Peak
Horizontal
13537.5
30.3
21.8
52.1
68.2
-16.1
Peak
Horizontal
7519.5
32.7
12.8
45.5
74.0
-28.5
Peak
Vertical
10877.0
31.1
18.2
49.3
74.0
-24.7
Peak
Vertical
12993.5
31.1
19.8
50.9
68.2
-17.3
Peak
Vertical
13486.5
30.9
21.7
52.6
68.2
-15.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 141 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 0 + 1 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7562.0
33.1
12.8
45.9
74.0
-28.1
Peak
Horizontal
11038.5
31.5
18.5
50.0
74.0
-24.0
Peak
Horizontal
12985.0
31.6
19.8
51.4
68.2
-16.8
Peak
Horizontal
13486.5
31.3
21.7
53.0
68.2
-15.2
Peak
Horizontal
7630.0
32.5
12.6
45.1
74.0
-28.9
Peak
Vertical
10877.0
32.6
18.2
50.8
74.0
-23.2
Peak
Vertical
13197.5
31.1
20.3
51.4
68.2
-16.8
Peak
Vertical
13741.5
31.7
22.0
53.7
68.2
-14.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 142 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 0 + 1 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7494.0
32.4
12.8
45.2
74.0
-28.8
Peak
Horizontal
12084.0
33.1
18.9
52.0
74.0
-22.0
Peak
Horizontal
13189.0
30.4
20.3
50.7
68.2
-17.5
Peak
Horizontal
13741.5
31.0
22.0
53.0
68.2
-15.2
Peak
Horizontal
7468.5
32.3
12.8
45.1
74.0
-28.9
Peak
Vertical
11548.5
31.6
19.4
51.0
74.0
-23.0
Peak
Vertical
12900.0
31.4
19.5
50.9
68.2
-17.3
Peak
Vertical
13503.5
30.6
21.8
52.4
68.2
-15.8
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 143 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 0 + 1 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7477.0
33.0
12.8
45.8
74.0
-28.2
Peak
Horizontal
11540.0
31.3
19.4
50.7
74.0
-23.3
Peak
Horizontal
13155.0
32.7
20.1
52.8
68.2
-15.4
Peak
Horizontal
13554.5
31.0
21.9
52.9
68.2
-15.3
Peak
Horizontal
7536.5
32.4
12.8
45.2
74.0
-28.8
Peak
Vertical
11157.5
31.8
18.7
50.5
74.0
-23.5
Peak
Vertical
12883.0
31.2
19.4
50.6
68.2
-17.6
Peak
Vertical
13418.5
30.8
21.5
52.3
68.2
-15.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 144 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 2 + 3 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7672.5
33.0
12.5
45.5
74.0
-28.5
Peak
Horizontal
11591.0
31.5
19.5
51.0
74.0
-23.0
Peak
Horizontal
13027.5
31.2
19.9
51.1
68.2
-17.1
Peak
Horizontal
13580.0
31.2
21.8
53.0
68.2
-15.2
Peak
Horizontal
7596.0
32.8
12.7
45.5
74.0
-28.5
Peak
Vertical
11421.0
31.9
19.1
51.0
74.0
-23.0
Peak
Vertical
12857.5
31.2
19.3
50.5
68.2
-17.7
Peak
Vertical
13461.0
30.3
21.6
51.9
68.2
-16.3
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 145 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 2 + 3 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7392.0
32.3
12.6
44.9
74.0
-29.1
Peak
Horizontal
11472.0
31.3
19.3
50.6
74.0
-23.4
Peak
Horizontal
12985.0
30.7
19.8
50.5
68.2
-17.7
Peak
Horizontal
13461.0
31.8
21.6
53.4
68.2
-14.8
Peak
Horizontal
7409.0
33.0
12.6
45.6
74.0
-28.4
Peak
Vertical
11565.5
31.6
19.5
51.1
74.0
-22.9
Peak
Vertical
13121.0
31.8
20.1
51.9
68.2
-16.3
Peak
Vertical
13580.0
31.0
21.8
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 146 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 2 + 3 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7434.5
33.7
12.7
46.4
74.0
-27.6
Peak
Horizontal
11463.5
31.2
19.3
50.5
74.0
-23.5
Peak
Horizontal
13087.0
31.2
20.1
51.3
68.2
-16.9
Peak
Horizontal
13605.5
30.6
21.8
52.4
68.2
-15.8
Peak
Horizontal
7443.0
33.2
12.7
45.9
74.0
-28.1
Peak
Vertical
10979.0
31.2
18.5
49.7
74.0
-24.3
Peak
Vertical
12976.5
31.3
19.8
51.1
68.2
-17.1
Peak
Vertical
13410.0
30.9
21.5
52.4
68.2
-15.8
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 147 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 2 + 3 /
Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7485.5
32.5
12.8
45.3
74.0
-28.7
Peak
Horizontal
10868.5
31.5
18.2
49.7
74.0
-24.3
Peak
Horizontal
13146.5
31.5
20.1
51.6
68.2
-16.6
Peak
Horizontal
13605.5
30.9
21.8
52.7
68.2
-15.5
Peak
Horizontal
7553.5
32.8
12.8
45.6
74.0
-28.4
Peak
Vertical
10894.0
31.7
18.3
50.0
74.0
-24.0
Peak
Vertical
12832.0
31.3
19.2
50.5
68.2
-17.7
Peak
Vertical
13520.5
30.7
21.8
52.5
68.2
-15.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 148 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
42+58
Test Mode:
Remark:
802.11ac-VHT80+80 Contiguous Ant 0 + 1 + 2 + 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7817.0
32.7
12.4
45.1
68.2
-23.1
Peak
Horizontal
8871.0
32.9
14.0
46.9
68.2
-21.3
Peak
Horizontal
9491.5
29.9
14.4
44.3
74.0
-29.7
Peak
Horizontal
11523.0
31.4
19.4
50.8
74.0
-23.2
Peak
Horizontal
7978.5
30.3
12.5
42.8
68.2
-25.4
Peak
Vertical
8786.0
29.3
13.9
43.2
68.2
-25.0
Peak
Vertical
9423.5
30.0
14.5
44.5
74.0
-29.5
Peak
Vertical
11599.5
31.0
19.4
50.4
74.0
-23.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 149 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106+122
Test Mode:
Remark:
802.11ac-VHT80+80 - Ant 0 + 1 + 2
+ 3 (CDD Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7783.0
33.1
12.4
45.5
68.2
-22.7
Peak
Horizontal
8769.0
29.7
13.9
43.6
68.2
-24.6
Peak
Horizontal
9398.0
31.1
14.5
45.6
74.0
-28.4
Peak
Horizontal
11531.5
31.4
19.4
50.8
74.0
-23.2
Peak
Horizontal
7783.0
32.0
12.4
44.4
68.2
-23.8
Peak
Vertical
8658.5
32.0
13.6
45.6
68.2
-22.6
Peak
Vertical
9423.5
30.3
14.5
44.8
74.0
-29.2
Peak
Vertical
11463.5
32.1
19.3
51.4
74.0
-22.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 150 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
52
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7528.0
32.3
12.8
45.1
74.0
-28.9
Peak
Horizontal
10630.5
32.1
17.3
49.4
74.0
-24.6
Peak
Horizontal
12883.0
31.1
19.4
50.5
68.2
-17.7
Peak
Horizontal
13444.0
30.7
21.6
52.3
68.2
-15.9
Peak
Horizontal
7434.5
32.1
12.7
44.8
74.0
-29.2
Peak
Vertical
10911.0
30.9
18.4
49.3
74.0
-24.7
Peak
Vertical
12798.0
30.7
19.1
49.8
68.2
-18.4
Peak
Vertical
13529.0
30.0
21.8
51.8
68.2
-16.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 151 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
60
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7536.5
33.2
12.8
46.0
74.0
-28.0
Peak
Horizontal
10817.5
31.7
18.0
49.7
74.0
-24.3
Peak
Horizontal
13036.0
31.5
20.0
51.5
68.2
-16.7
Peak
Horizontal
13435.5
30.5
21.6
52.1
68.2
-16.1
Peak
Horizontal
7613.0
33.2
12.6
45.8
74.0
-28.2
Peak
Vertical
10877.0
31.0
18.2
49.2
74.0
-24.8
Peak
Vertical
12798.0
30.9
19.1
50.0
68.2
-18.2
Peak
Vertical
13486.5
30.3
21.7
52.0
68.2
-16.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 152 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
64
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7383.5
32.6
12.5
45.1
74.0
-28.9
Peak
Horizontal
10885.5
31.4
18.3
49.7
74.0
-24.3
Peak
Horizontal
12849.0
31.1
19.2
50.3
68.2
-17.9
Peak
Horizontal
13622.5
30.9
21.8
52.7
68.2
-15.5
Peak
Horizontal
7664.0
33.0
12.5
45.5
74.0
-28.5
Peak
Vertical
10928.0
31.5
18.4
49.9
74.0
-24.1
Peak
Vertical
13172.0
30.3
20.2
50.5
68.2
-17.7
Peak
Vertical
13546.0
30.3
21.9
52.2
68.2
-16.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 153 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
100
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7383.5
32.6
12.5
45.1
74.0
-28.9
Peak
Horizontal
10987.5
31.6
18.5
50.1
74.0
-23.9
Peak
Horizontal
13095.5
31.7
20.1
51.8
68.2
-16.4
Peak
Horizontal
13512.0
31.3
21.8
53.1
68.2
-15.1
Peak
Horizontal
7528.0
33.0
12.8
45.8
74.0
-28.2
Peak
Vertical
10928.0
32.2
18.4
50.6
74.0
-23.4
Peak
Vertical
12900.0
30.3
19.5
49.8
68.2
-18.4
Peak
Vertical
13495.0
30.2
21.7
51.9
68.2
-16.3
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 154 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
120
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7468.5
32.8
12.8
45.6
74.0
-28.4
Peak
Horizontal
11557.0
31.3
19.5
50.8
74.0
-23.2
Peak
Horizontal
13053.0
32.5
20.0
52.5
68.2
-15.7
Peak
Horizontal
13529.0
31.2
21.8
53.0
68.2
-15.2
Peak
Horizontal
7502.5
32.5
12.8
45.3
74.0
-28.7
Peak
Vertical
11123.5
31.7
18.6
50.3
74.0
-23.7
Peak
Vertical
13061.5
30.9
20.0
50.9
68.2
-17.3
Peak
Vertical
13546.0
31.1
21.9
53.0
68.2
-15.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 155 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
140
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7426.0
33.0
12.7
45.7
74.0
-28.3
Peak
Horizontal
10868.5
31.7
18.2
49.9
74.0
-24.1
Peak
Horizontal
12925.5
30.4
19.6
50.0
68.2
-18.2
Peak
Horizontal
13503.5
31.5
21.8
53.3
68.2
-14.9
Peak
Horizontal
7460.0
33.1
12.8
45.9
74.0
-28.1
Peak
Vertical
10919.5
31.3
18.4
49.7
74.0
-24.3
Peak
Vertical
12917.0
30.9
19.6
50.5
68.2
-17.7
Peak
Vertical
13512.0
30.0
21.8
51.8
68.2
-16.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 156 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
144
Test Mode:
Remark:
802.11n-HT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7332.5
32.9
12.4
45.3
74.0
-28.7
Peak
Horizontal
11565.5
31.5
19.5
51.0
74.0
-23.0
Peak
Horizontal
13061.5
30.8
20.0
50.8
68.2
-17.4
Peak
Horizontal
13469.5
31.3
21.7
53.0
68.2
-15.2
Peak
Horizontal
7604.5
33.1
12.7
45.8
74.0
-28.2
Peak
Vertical
10809.0
31.6
17.9
49.5
74.0
-24.5
Peak
Vertical
13138.0
31.3
20.1
51.4
68.2
-16.8
Peak
Vertical
13724.5
31.3
22.0
53.3
68.2
-14.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 157 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
54
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7570.5
34.1
12.8
46.9
74.0
-27.1
Peak
Horizontal
11591.0
31.9
19.5
51.4
74.0
-22.6
Peak
Horizontal
13163.5
32.5
20.2
52.7
68.2
-15.5
Peak
Horizontal
13563.0
31.6
21.8
53.4
68.2
-14.8
Peak
Horizontal
7621.5
33.7
12.6
46.3
74.0
-27.7
Peak
Vertical
11421.0
31.7
19.1
50.8
74.0
-23.2
Peak
Vertical
13019.0
31.4
19.9
51.3
68.2
-16.9
Peak
Vertical
13503.5
31.0
21.8
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 158 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
62
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7434.5
32.8
12.7
45.5
74.0
-28.5
Peak
Horizontal
11523.0
31.6
19.4
51.0
74.0
-23.0
Peak
Horizontal
13163.5
31.2
20.2
51.4
68.2
-16.8
Peak
Horizontal
13707.5
31.3
22.0
53.3
68.2
-14.9
Peak
Horizontal
7579.0
32.7
12.7
45.4
74.0
-28.6
Peak
Vertical
10928.0
31.3
18.4
49.7
74.0
-24.3
Peak
Vertical
13027.5
31.3
19.9
51.2
68.2
-17.0
Peak
Vertical
13605.5
31.9
21.8
53.7
68.2
-14.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 159 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
102
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7613.0
33.4
12.6
46.0
74.0
-28.0
Peak
Horizontal
11446.5
31.5
19.2
50.7
74.0
-23.3
Peak
Horizontal
12925.5
30.5
19.6
50.1
68.2
-18.1
Peak
Horizontal
13461.0
31.3
21.6
52.9
68.2
-15.3
Peak
Horizontal
7613.0
32.9
12.6
45.5
74.0
-28.5
Peak
Vertical
10936.5
31.4
18.4
49.8
74.0
-24.2
Peak
Vertical
12866.0
30.3
19.3
49.6
68.2
-18.6
Peak
Vertical
13469.5
30.3
21.7
52.0
68.2
-16.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 160 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
118
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7570.5
33.1
12.8
45.9
74.0
-28.1
Peak
Horizontal
11166.0
31.5
18.7
50.2
74.0
-23.8
Peak
Horizontal
12968.0
31.0
19.8
50.8
68.2
-17.4
Peak
Horizontal
13503.5
30.6
21.8
52.4
68.2
-15.8
Peak
Horizontal
7434.5
32.7
12.7
45.4
74.0
-28.6
Peak
Vertical
11463.5
31.0
19.3
50.3
74.0
-23.7
Peak
Vertical
13027.5
31.9
19.9
51.8
68.2
-16.4
Peak
Vertical
13546.0
30.2
21.9
52.1
68.2
-16.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 161 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
134
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7553.5
32.6
12.8
45.4
74.0
-28.6
Peak
Horizontal
11174.5
31.2
18.7
49.9
74.0
-24.1
Peak
Horizontal
13095.5
32.4
20.1
52.5
68.2
-15.7
Peak
Horizontal
13520.5
31.0
21.8
52.8
68.2
-15.4
Peak
Horizontal
7485.5
32.3
12.8
45.1
74.0
-28.9
Peak
Vertical
11421.0
31.6
19.1
50.7
74.0
-23.3
Peak
Vertical
13095.5
30.9
20.1
51.0
68.2
-17.2
Peak
Vertical
13427.0
30.8
21.5
52.3
68.2
-15.9
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 162 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
142
Test Mode:
Remark:
802.11n-HT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7494.0
33.0
12.8
45.8
74.0
-28.2
Peak
Horizontal
11514.5
31.7
19.4
51.1
74.0
-22.9
Peak
Horizontal
12959.5
31.0
19.7
50.7
68.2
-17.5
Peak
Horizontal
13597.0
31.5
21.8
53.3
68.2
-14.9
Peak
Horizontal
7451.5
32.7
12.8
45.5
74.0
-28.5
Peak
Vertical
11106.5
31.3
18.6
49.9
74.0
-24.1
Peak
Vertical
12959.5
30.8
19.7
50.5
68.2
-17.7
Peak
Vertical
13733.0
31.1
22.0
53.1
68.2
-15.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 163 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
52
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7604.5
33.5
12.7
46.2
74.0
-27.8
Peak
Horizontal
11446.5
32.1
19.2
51.3
74.0
-22.7
Peak
Horizontal
13027.5
31.5
19.9
51.4
68.2
-16.8
Peak
Horizontal
13631.0
31.7
21.8
53.5
68.2
-14.7
Peak
Horizontal
7468.5
32.1
12.8
44.9
74.0
-29.1
Peak
Vertical
11625.0
31.4
19.4
50.8
74.0
-23.2
Peak
Vertical
12968.0
31.0
19.8
50.8
68.2
-17.4
Peak
Vertical
13767.0
31.1
22.0
53.1
68.2
-15.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 164 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
60
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7519.5
33.1
12.8
45.9
74.0
-28.1
Peak
Horizontal
10928.0
32.0
18.4
50.4
74.0
-23.6
Peak
Horizontal
12993.5
31.7
19.8
51.5
68.2
-16.7
Peak
Horizontal
13546.0
30.8
21.9
52.7
68.2
-15.5
Peak
Horizontal
7502.5
32.7
12.8
45.5
74.0
-28.5
Peak
Vertical
11013.0
30.5
18.5
49.0
74.0
-25.0
Peak
Vertical
12908.5
30.5
19.5
50.0
68.2
-18.2
Peak
Vertical
13648.0
31.3
21.8
53.1
68.2
-15.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 165 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
64
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7341.0
32.9
12.4
45.3
74.0
-28.7
Peak
Horizontal
11608.0
31.7
19.4
51.1
74.0
-22.9
Peak
Horizontal
13129.5
30.8
20.1
50.9
68.2
-17.3
Peak
Horizontal
13512.0
31.6
21.8
53.4
68.2
-14.8
Peak
Horizontal
7511.0
32.8
12.8
45.6
74.0
-28.4
Peak
Vertical
11633.5
31.4
19.4
50.8
74.0
-23.2
Peak
Vertical
13078.5
30.9
20.0
50.9
68.2
-17.3
Peak
Vertical
13605.5
31.2
21.8
53.0
68.2
-15.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 166 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
100
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7494.0
33.5
12.8
46.3
74.0
-27.7
Peak
Horizontal
11582.5
31.4
19.5
50.9
74.0
-23.1
Peak
Horizontal
13036.0
31.4
20.0
51.4
68.2
-16.8
Peak
Horizontal
13546.0
30.5
21.9
52.4
68.2
-15.8
Peak
Horizontal
7613.0
33.2
12.6
45.8
74.0
-28.2
Peak
Vertical
10979.0
31.1
18.5
49.6
74.0
-24.4
Peak
Vertical
13044.5
31.1
20.0
51.1
68.2
-17.1
Peak
Vertical
13605.5
31.3
21.8
53.1
68.2
-15.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 167 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
120
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7536.5
32.6
12.8
45.4
74.0
-28.6
Peak
Horizontal
11463.5
31.7
19.3
51.0
74.0
-23.0
Peak
Horizontal
13163.5
31.8
20.2
52.0
68.2
-16.2
Peak
Horizontal
13656.5
31.4
21.8
53.2
68.2
-15.0
Peak
Horizontal
7434.5
32.0
12.7
44.7
74.0
-29.3
Peak
Vertical
11769.5
32.3
18.8
51.1
74.0
-22.9
Peak
Vertical
12849.0
31.1
19.2
50.3
68.2
-17.9
Peak
Vertical
13554.5
30.8
21.9
52.7
68.2
-15.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 168 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
140
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7451.5
32.7
12.8
45.5
74.0
-28.5
Peak
Horizontal
11599.5
31.3
19.4
50.7
74.0
-23.3
Peak
Horizontal
13019.0
32.2
19.9
52.1
68.2
-16.1
Peak
Horizontal
13537.5
31.1
21.8
52.9
68.2
-15.3
Peak
Horizontal
7545.0
32.7
12.8
45.5
74.0
-28.5
Peak
Vertical
11506.0
31.9
19.4
51.3
74.0
-22.7
Peak
Vertical
13087.0
31.3
20.1
51.4
68.2
-16.8
Peak
Vertical
13520.5
31.0
21.8
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 169 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
144
Test Mode:
Remark:
802.11ac-VHT20 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7460.0
33.0
12.8
45.8
74.0
-28.2
Peak
Horizontal
11514.5
31.1
19.4
50.5
74.0
-23.5
Peak
Horizontal
13044.5
30.9
20.0
50.9
68.2
-17.3
Peak
Horizontal
13529.0
31.7
21.8
53.5
68.2
-14.7
Peak
Horizontal
7443.0
33.0
12.7
45.7
74.0
-28.3
Peak
Vertical
10928.0
32.1
18.4
50.5
74.0
-23.5
Peak
Vertical
13104.0
31.8
20.1
51.9
68.2
-16.3
Peak
Vertical
13597.0
31.4
21.8
53.2
68.2
-15.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 170 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
54
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7477.0
32.7
12.8
45.5
74.0
-28.5
Peak
Horizontal
11523.0
32.1
19.4
51.5
74.0
-22.5
Peak
Horizontal
13070.0
31.5
20.0
51.5
68.2
-16.7
Peak
Horizontal
13554.5
30.9
21.9
52.8
68.2
-15.4
Peak
Horizontal
7604.5
32.6
12.7
45.3
74.0
-28.7
Peak
Vertical
11157.5
31.5
18.7
50.2
74.0
-23.8
Peak
Vertical
12908.5
31.6
19.5
51.1
68.2
-17.1
Peak
Vertical
13486.5
30.2
21.7
51.9
68.2
-16.3
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 171 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
62
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7485.5
33.1
12.8
45.9
74.0
-28.1
Peak
Horizontal
11565.5
31.2
19.5
50.7
74.0
-23.3
Peak
Horizontal
12900.0
30.4
19.5
49.9
68.2
-18.3
Peak
Horizontal
13435.5
30.7
21.6
52.3
68.2
-15.9
Peak
Horizontal
7468.5
32.4
12.8
45.2
74.0
-28.8
Peak
Vertical
11140.5
31.8
18.7
50.5
74.0
-23.5
Peak
Vertical
12900.0
30.8
19.5
50.3
68.2
-17.9
Peak
Vertical
13469.5
31.0
21.7
52.7
68.2
-15.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 172 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
102
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7536.5
33.2
12.8
46.0
74.0
-28.0
Peak
Horizontal
10928.0
32.3
18.4
50.7
74.0
-23.3
Peak
Horizontal
12849.0
31.5
19.2
50.7
68.2
-17.5
Peak
Horizontal
13469.5
32.3
21.7
54.0
68.2
-14.2
Peak
Horizontal
7485.5
33.3
12.8
46.1
74.0
-27.9
Peak
Vertical
11480.5
31.4
19.3
50.7
74.0
-23.3
Peak
Vertical
13027.5
30.5
19.9
50.4
68.2
-17.8
Peak
Vertical
13588.5
31.8
21.8
53.6
68.2
-14.6
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 173 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
118
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7664.0
33.9
12.5
46.4
74.0
-27.6
Peak
Horizontal
11523.0
31.4
19.4
50.8
74.0
-23.2
Peak
Horizontal
13010.5
30.8
19.9
50.7
68.2
-17.5
Peak
Horizontal
13546.0
31.1
21.9
53.0
68.2
-15.2
Peak
Horizontal
7494.0
32.4
12.8
45.2
74.0
-28.8
Peak
Vertical
10928.0
33.0
18.4
51.4
74.0
-22.6
Peak
Vertical
13044.5
31.7
20.0
51.7
68.2
-16.5
Peak
Vertical
13665.0
31.3
21.9
53.2
68.2
-15.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 174 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
134
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7375.0
33.0
12.5
45.5
74.0
-28.5
Peak
Horizontal
11548.5
32.0
19.4
51.4
74.0
-22.6
Peak
Horizontal
12976.5
31.5
19.8
51.3
68.2
-16.9
Peak
Horizontal
13529.0
30.9
21.8
52.7
68.2
-15.5
Peak
Horizontal
7570.5
32.5
12.8
45.3
74.0
-28.7
Peak
Vertical
11633.5
31.4
19.4
50.8
74.0
-23.2
Peak
Vertical
13053.0
31.4
20.0
51.4
68.2
-16.8
Peak
Vertical
13605.5
31.0
21.8
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 175 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
142
Test Mode:
Remark:
802.11ac-VHT40 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7477.0
33.0
12.8
45.8
74.0
-28.2
Peak
Horizontal
10970.5
32.3
18.4
50.7
74.0
-23.3
Peak
Horizontal
12959.5
31.4
19.7
51.1
68.2
-17.1
Peak
Horizontal
13580.0
31.3
21.8
53.1
68.2
-15.1
Peak
Horizontal
7358.0
32.6
12.4
45.0
74.0
-29.0
Peak
Vertical
11565.5
31.0
19.5
50.5
74.0
-23.5
Peak
Vertical
12908.5
31.0
19.5
50.5
68.2
-17.7
Peak
Vertical
13699.0
30.8
22.0
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 176 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7451.5
32.5
12.8
45.3
74.0
-28.7
Peak
Horizontal
11548.5
31.6
19.4
51.0
74.0
-23.0
Peak
Horizontal
13036.0
30.8
20.0
50.8
68.2
-17.4
Peak
Horizontal
13648.0
30.8
21.8
52.6
68.2
-15.6
Peak
Horizontal
7409.0
32.7
12.6
45.3
74.0
-28.7
Peak
Vertical
11472.0
31.1
19.3
50.4
74.0
-23.6
Peak
Vertical
12891.5
30.3
19.4
49.7
68.2
-18.5
Peak
Vertical
13427.0
32.2
21.5
53.7
68.2
-14.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 177 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7358.0
33.2
12.4
45.6
74.0
-28.4
Peak
Horizontal
10970.5
31.7
18.4
50.1
74.0
-23.9
Peak
Horizontal
12959.5
30.8
19.7
50.5
68.2
-17.7
Peak
Horizontal
13435.5
30.0
21.6
51.6
68.2
-16.6
Peak
Horizontal
7468.5
32.1
12.8
44.9
74.0
-29.1
Peak
Vertical
11557.0
31.3
19.5
50.8
74.0
-23.2
Peak
Vertical
13095.5
31.0
20.1
51.1
68.2
-17.1
Peak
Vertical
13444.0
31.2
21.6
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 178 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7664.0
32.7
12.5
45.2
74.0
-28.8
Peak
Horizontal
10877.0
32.0
18.2
50.2
74.0
-23.8
Peak
Horizontal
12908.5
31.3
19.5
50.8
68.2
-17.4
Peak
Horizontal
13571.5
31.3
21.8
53.1
68.2
-15.1
Peak
Horizontal
7579.0
32.4
12.7
45.1
74.0
-28.9
Peak
Vertical
11557.0
31.3
19.5
50.8
74.0
-23.2
Peak
Vertical
13036.0
32.0
20.0
52.0
68.2
-16.2
Peak
Vertical
13597.0
31.3
21.8
53.1
68.2
-15.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 179 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
Test Mode:
Remark:
802.11ac-VHT80 - Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7366.5
33.4
12.5
45.9
74.0
-28.1
Peak
Horizontal
11208.5
31.9
18.8
50.7
74.0
-23.3
Peak
Horizontal
12985.0
31.5
19.8
51.3
68.2
-16.9
Peak
Horizontal
13495.0
31.0
21.7
52.7
68.2
-15.5
Peak
Horizontal
7494.0
32.7
12.8
45.5
74.0
-28.5
Peak
Vertical
11098.0
31.7
18.6
50.3
74.0
-23.7
Peak
Vertical
13078.5
30.9
20.0
50.9
68.2
-17.3
Peak
Vertical
13614.0
31.2
21.8
53.0
68.2
-15.2
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 180 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
802.11ac-VHT80+80 - Ant 0 + 1 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7519.5
30.0
12.8
42.8
74.0
-31.2
Peak
Horizontal
10996.0
29.5
18.5
48.0
74.0
-26.0
Peak
Horizontal
12968.0
28.6
19.8
48.4
68.2
-19.8
Peak
Horizontal
14166.5
29.3
23.1
52.4
68.2
-15.8
Peak
Horizontal
7332.5
31.0
12.4
43.4
74.0
-30.6
Peak
Vertical
11557.0
28.8
19.5
48.3
74.0
-25.7
Peak
Vertical
12908.5
28.1
19.5
47.6
68.2
-20.6
Peak
Vertical
13852.0
29.2
22.3
51.5
68.2
-16.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 181 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
802.11ac-VHT80+80 - Ant 0 + 1 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7409.0
31.0
12.6
43.6
74.0
-30.4
Peak
Horizontal
11098.0
29.1
18.6
47.7
74.0
-26.3
Peak
Horizontal
13044.5
28.2
20.0
48.2
68.2
-20.0
Peak
Horizontal
14081.5
28.9
22.8
51.7
68.2
-16.5
Peak
Horizontal
7426.0
30.7
12.7
43.4
74.0
-30.6
Peak
Vertical
11098.0
29.1
18.6
47.7
74.0
-26.3
Peak
Vertical
13044.5
28.7
20.0
48.7
68.2
-19.5
Peak
Vertical
13444.0
28.1
21.6
49.7
68.2
-18.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 182 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
802.11ac-VHT80+80 - Ant 0 + 1 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7553.5
30.9
12.8
43.7
74.0
-30.3
Peak
Horizontal
10928.0
29.4
18.4
47.8
74.0
-26.2
Peak
Horizontal
13019.0
28.1
19.9
48.0
68.2
-20.2
Peak
Horizontal
13707.5
28.4
22.0
50.4
68.2
-17.8
Peak
Horizontal
7460.0
31.1
12.8
43.9
74.0
-30.1
Peak
Vertical
11565.5
29.4
19.5
48.9
74.0
-25.1
Peak
Vertical
13044.5
28.3
20.0
48.3
68.2
-19.9
Peak
Vertical
13452.5
29.1
21.6
50.7
68.2
-17.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 183 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
802.11ac-VHT80+80 - Ant 0 + 1 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7553.5
31.0
12.8
43.8
74.0
-30.2
Peak
Horizontal
11625.0
29.1
19.4
48.5
74.0
-25.5
Peak
Horizontal
13444.0
28.5
21.6
50.1
68.2
-18.1
Peak
Horizontal
14158.0
29.4
23.1
52.5
68.2
-15.7
Peak
Horizontal
7570.5
30.4
12.8
43.2
74.0
-30.8
Peak
Vertical
10970.5
28.5
18.4
46.9
74.0
-27.1
Peak
Vertical
13155.0
28.8
20.1
48.9
68.2
-19.3
Peak
Vertical
14030.5
28.4
22.7
51.1
68.2
-17.1
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 184 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
58
802.11ac-VHT80+80 - Ant 2 + 3 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7511.0
32.9
12.8
45.7
74.0
-28.3
Peak
Horizontal
11531.5
30.6
19.4
50.0
74.0
-24.0
Peak
Horizontal
13002.0
30.6
19.9
50.5
68.2
-17.7
Peak
Horizontal
13537.5
30.9
21.8
52.7
68.2
-15.5
Peak
Horizontal
7400.5
32.9
12.6
45.5
74.0
-28.5
Peak
Vertical
10834.5
30.6
18.1
48.7
74.0
-25.3
Peak
Vertical
13036.0
31.2
20.0
51.2
68.2
-17.0
Peak
Vertical
13639.5
30.4
21.8
52.2
68.2
-16.0
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 185 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
106
802.11ac-VHT80+80 - Ant 2 + 3 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7681.0
33.1
12.5
45.6
74.0
-28.4
Peak
Horizontal
10775.0
31.9
17.8
49.7
74.0
-24.3
Peak
Horizontal
12738.5
31.3
18.9
50.2
68.2
-18.0
Peak
Horizontal
13809.5
30.9
22.1
53.0
68.2
-15.2
Peak
Horizontal
7494.0
32.4
12.8
45.2
74.0
-28.8
Peak
Vertical
10919.5
31.6
18.4
50.0
74.0
-24.0
Peak
Vertical
13121.0
31.2
20.1
51.3
68.2
-16.9
Peak
Vertical
13622.5
30.7
21.8
52.5
68.2
-15.7
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 186 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
122
802.11ac-VHT80+80 - Ant 2 + 3 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7647.0
33.0
12.5
45.5
74.0
-28.5
Peak
Horizontal
10996.0
31.2
18.5
49.7
74.0
-24.3
Peak
Horizontal
12857.5
31.4
19.3
50.7
68.2
-17.5
Peak
Horizontal
13503.5
30.7
21.8
52.5
68.2
-15.7
Peak
Horizontal
7324.0
32.9
12.4
45.3
74.0
-28.7
Peak
Vertical
11064.0
31.4
18.5
49.9
74.0
-24.1
Peak
Vertical
12806.5
31.2
19.1
50.3
68.2
-17.9
Peak
Vertical
13486.5
31.0
21.7
52.7
68.2
-15.5
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 187 of 356
Product
ACCESS POINT
Temperature
26°C
Test Engineer
Kevin Ker
Relative Humidity
57 %
Test Site
AC1
Test Date
2017/08/16
Test Channel:
138
802.11ac-VHT80+80 - Ant 2 + 3 /
Test Mode:
Ant 0 + 1 + 2 + 3
(Beam-Forming Mode)
Remark:
1. Average measurement was not performed if peak level lower than average
limit.
2. Other frequency was 20dB below limit line within 1-18GHz, there is not show
in the report.
Mark Frequency
(MHz)
Reading
Factor
Measure
Limit
Level
(dB)
Level
(dBμV/m)
(dB)
(dBμV)
Margin Detector Polarization
(dBμV/m)
7477.0
32.3
12.8
45.1
74.0
-28.9
Peak
Horizontal
10860.0
31.2
18.2
49.4
74.0
-24.6
Peak
Horizontal
12806.5
31.4
19.1
50.5
68.2
-17.7
Peak
Horizontal
13418.5
30.0
21.5
51.5
68.2
-16.7
Peak
Horizontal
7485.5
32.2
12.8
45.0
74.0
-29.0
Peak
Vertical
10707.0
31.6
17.5
49.1
74.0
-24.9
Peak
Vertical
12917.0
30.6
19.6
50.2
68.2
-18.0
Peak
Vertical
13775.5
30.7
22.1
52.8
68.2
-15.4
Peak
Vertical
Note 1: “*” is not in restricted band, its limit is -27dBm/MHz. At a distance of 3 meters, the field strength
limit in dBμV/m can be determined by adding a “conversion” factor of 95.2dB to the EIRP limit of
-27dBm/MHz to obtain the limit for out of band spurious emissions.
Note 2: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 188 of 356
The Worst Case of Radiated Emission below 1GHz:
Site: AC1
Time: 2017/09/07 - 21:21
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: VULB 9168_20-2000MHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: AC 120V/60Hz
Note: There is the worst case within frequency range 30MHz~1GHz.
No
Flag
Mark
Frequency
Measure
Reading
Margin
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
35.335
18.487
5.480
-21.513
40.000
13.007
QP
82.865
22.495
12.650
-17.505
40.000
9.845
QP
162.890
32.024
21.950
-11.476
43.500
10.074
QP
210.420
32.975
20.400
-10.525
43.500
12.575
QP
332.155
24.320
8.680
-21.680
46.000
15.640
QP
942.770
26.801
2.060
-19.199
46.000
24.741
QP
Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m)
Note 2: The test trace is same as the ambient noise and the amplitude of the emissions are attenuated more
than 20dB below the permissible (the test frequency range: 9kHz ~ 30MHz, 18GHz ~ 40GHz), therefore no data
appear in the report.
FCC ID: Q9DAPEX037457
Page Number: 189 of 356
Site: AC1
Time: 2017/09/07 - 21:24
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: VULB 9168_20-2000MHz
Polarity: Vertical
EUT: ACCESS POINT
Power: AC 120V/60Hz
Note: There is the worst case within frequency range 30MHz~1GHz.
No
Frequency
Measure
Reading
Margin
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
34.850
27.579
14.660
-12.421
40.000
12.919
QP
83.350
22.863
12.950
-17.137
40.000
9.914
QP
167.740
25.870
15.590
-17.630
43.500
10.280
QP
207.990
26.186
13.650
-17.314
43.500
12.536
QP
355.920
24.680
8.540
-21.320
46.000
16.140
QP
926.280
26.262
1.650
-19.738
46.000
24.612
QP
Flag
Mark
Type
Note 1: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m)
Note 2: The test trace is same as the ambient noise and the amplitude of the emissions are attenuated more
than 20dB below the permissible (the test frequency range: 9kHz ~ 30MHz, 18GHz ~ 40GHz), therefore no data
appear in the report.
FCC ID: Q9DAPEX037457
Page Number: 190 of 356
6. Radiated RestrictedBand Edge Measurement Test Result
Site: AC1
Time: 2017/08/22 - 02:16
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5316.040
115.180
111.339
N/A
N/A
3.841
PK
5350.000
56.613
52.708
-17.387
74.000
3.904
PK
5350.040
59.020
55.115
-14.980
74.000
3.904
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 191 of 356
Site: AC1
Time: 2017/08/22 - 02:18
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5318.280
101.722
97.877
N/A
N/A
3.845
AV
5350.000
44.955
41.050
-9.045
54.000
3.904
AV
5367.120
45.033
41.097
-8.967
54.000
3.936
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 192 of 356
Site: AC1
Time: 2017/08/22 - 02:21
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.320
113.156
109.303
N/A
N/A
3.853
PK
5350.000
57.690
53.785
-16.310
74.000
3.904
PK
5363.240
58.891
54.962
-15.109
74.000
3.928
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 193 of 356
Site: AC1
Time: 2017/08/22 - 02:22
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.440
100.632
96.779
N/A
N/A
3.853
AV
5350.000
44.936
41.031
-9.064
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 194 of 356
Site: AC1
Time: 2017/08/22 - 02:25
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5434.770
59.701
55.592
-14.299
74.000
4.109
PK
5460.000
57.597
53.417
-16.403
74.000
4.180
PK
5463.390
58.867
54.679
-15.133
74.000
4.187
PK
5470.000
58.310
54.108
-15.690
74.000
4.202
PK
5505.645
114.732
110.443
N/A
N/A
4.289
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 195 of 356
Site: AC1
Time: 2017/08/22 - 02:30
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
44.974
40.794
-9.026
54.000
4.180
AV
5470.000
45.205
41.003
-8.795
54.000
4.202
AV
5506.095
101.343
97.053
N/A
N/A
4.289
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 196 of 356
Site: AC1
Time: 2017/08/22 - 02:32
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5445.615
59.086
54.945
-14.914
74.000
4.141
PK
5460.000
56.998
52.818
-17.002
74.000
4.180
PK
5470.000
59.002
54.800
-14.998
74.000
4.202
PK
5505.555
112.775
108.487
N/A
N/A
4.289
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 197 of 356
Site: AC1
Time: 2017/08/22 - 02:35
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
44.882
40.702
-9.118
54.000
4.180
AV
5470.000
45.404
41.202
-8.596
54.000
4.202
AV
5503.215
101.070
96.789
N/A
N/A
4.281
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 198 of 356
Site: AC1
Time: 2017/08/22 - 02:36
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5696.505
114.370
109.510
N/A
N/A
4.859
PK
5725.000
58.410
53.381
-15.590
74.000
5.029
PK
5740.672
60.274
55.145
-13.726
74.000
5.129
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 199 of 356
Site: AC1
Time: 2017/08/22 - 02:41
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5697.057
100.310
95.447
N/A
N/A
4.863
AV
5725.000
45.931
40.902
-8.069
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 200 of 356
Site: AC1
Time: 2017/08/22 - 02:42
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5696.310
112.957
108.098
N/A
N/A
4.859
PK
5725.000
58.223
53.194
-15.777
74.000
5.029
PK
5733.132
59.835
54.754
-14.165
74.000
5.081
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 201 of 356
Site: AC1
Time: 2017/08/22 - 02:43
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11a at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5697.642
99.629
94.763
N/A
N/A
4.866
AV
5725.000
45.622
40.593
-8.378
54.000
5.029
AV
5726.243
45.683
40.646
-8.317
54.000
5.037
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 202 of 356
Site: AC1
Time: 2017/08/22 - 03:12
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5323.560
115.377
111.522
N/A
N/A
3.855
PK
5350.000
57.323
53.418
-16.677
74.000
3.904
PK
5358.920
58.958
55.037
-15.042
74.000
3.921
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 203 of 356
Site: AC1
Time: 2017/08/22 - 03:15
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5324.840
102.399
98.541
N/A
N/A
3.857
AV
5350.000
44.807
40.902
-9.193
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 204 of 356
Site: AC1
Time: 2017/08/22 - 03:16
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.600
112.654
108.800
N/A
N/A
3.853
PK
5350.000
57.274
53.369
-16.726
74.000
3.904
PK
5362.280
58.980
55.053
-15.020
74.000
3.927
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 205 of 356
Site: AC1
Time: 2017/08/22 - 03:20
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.080
101.320
97.467
N/A
N/A
3.852
AV
5350.000
44.922
41.017
-9.078
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 206 of 356
Site: AC1
Time: 2017/08/22 - 03:21
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5457.090
59.444
55.270
-14.556
74.000
4.174
PK
5460.000
57.267
53.087
-16.733
74.000
4.180
PK
5465.550
58.421
54.229
-15.579
74.000
4.193
PK
5470.000
57.838
53.636
-16.162
74.000
4.202
PK
5505.780
114.673
110.384
N/A
N/A
4.289
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 207 of 356
Site: AC1
Time: 2017/08/22 - 03:24
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
45.011
40.831
-8.989
54.000
4.180
AV
5469.735
45.403
41.201
-8.597
54.000
4.202
AV
5470.000
45.369
41.167
-8.631
54.000
4.202
AV
5506.815
101.962
97.670
N/A
N/A
4.292
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 208 of 356
Site: AC1
Time: 2017/08/22 - 03:25
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5458.755
59.160
54.982
-14.840
74.000
4.178
PK
5460.000
56.394
52.214
-17.606
74.000
4.180
PK
5464.515
58.634
54.444
-15.366
74.000
4.191
PK
5470.000
57.018
52.816
-16.982
74.000
4.202
PK
5503.890
113.731
109.448
N/A
N/A
4.284
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 209 of 356
Site: AC1
Time: 2017/08/22 - 03:27
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
44.851
40.671
-9.149
54.000
4.180
AV
5470.000
45.360
41.158
-8.640
54.000
4.202
AV
5503.035
101.729
97.448
N/A
N/A
4.281
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 210 of 356
Site: AC1
Time: 2017/08/22 - 03:28
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5696.212
114.113
109.255
N/A
N/A
4.859
PK
5725.000
60.117
55.088
-13.883
74.000
5.029
PK
5731.215
60.374
55.305
-13.626
74.000
5.069
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 211 of 356
Site: AC1
Time: 2017/08/22 - 03:33
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5706.547
101.434
96.521
N/A
N/A
4.912
AV
5725.000
46.170
41.141
-7.830
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 212 of 356
Site: AC1
Time: 2017/08/22 - 03:34
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5698.130
112.863
107.995
N/A
N/A
4.868
PK
5725.000
58.194
53.165
-15.806
74.000
5.029
PK
5727.835
60.019
54.972
-13.981
74.000
5.047
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 213 of 356
Site: AC1
Time: 2017/08/22 - 03:36
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5695.498
100.805
95.951
N/A
N/A
4.854
AV
5725.000
45.791
40.762
-8.209
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 214 of 356
Site: AC1
Time: 2017/08/22 - 04:05
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5296.850
114.849
111.034
N/A
N/A
3.815
PK
5350.000
60.297
56.392
-13.703
74.000
3.904
PK
5360.150
60.941
57.018
-13.059
74.000
3.923
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 215 of 356
Site: AC1
Time: 2017/08/22 - 04:12
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5305.600
102.010
98.188
N/A
N/A
3.822
AV
5350.000
47.826
43.921
-6.174
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 216 of 356
Site: AC1
Time: 2017/08/22 - 04:12
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5313.050
114.003
110.167
N/A
N/A
3.836
PK
5350.000
59.092
55.187
-14.908
74.000
3.904
PK
5351.750
60.531
56.623
-13.469
74.000
3.909
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 217 of 356
Site: AC1
Time: 2017/08/22 - 04:13
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5313.050
100.674
96.838
N/A
N/A
3.836
AV
5350.000
48.051
44.146
-5.949
54.000
3.904
AV
5350.150
48.089
44.184
-5.911
54.000
3.905
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 218 of 356
Site: AC1
Time: 2017/08/22 - 04:17
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5457.500
61.206
57.031
-12.794
74.000
4.175
PK
5460.000
59.039
54.859
-14.961
74.000
4.180
PK
5469.250
61.192
56.991
-12.808
74.000
4.201
PK
5470.000
60.342
56.140
-13.658
74.000
4.202
PK
5518.850
115.191
110.863
N/A
N/A
4.328
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 219 of 356
Site: AC1
Time: 2017/08/22 - 04:20
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
46.613
42.433
-7.387
54.000
4.180
AV
5469.900
47.428
43.226
-6.572
54.000
4.202
AV
5470.000
47.422
43.220
-6.578
54.000
4.202
AV
5516.250
102.207
97.887
N/A
N/A
4.320
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 220 of 356
Site: AC1
Time: 2017/08/22 - 04:22
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
57.822
53.642
-16.178
74.000
4.180
PK
5468.850
60.330
56.130
-13.670
74.000
4.200
PK
5470.000
58.649
54.447
-15.351
74.000
4.202
PK
5512.600
113.345
109.036
N/A
N/A
4.309
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 221 of 356
Site: AC1
Time: 2017/08/22 - 04:24
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
46.235
42.055
-7.765
54.000
4.180
AV
5470.000
47.343
43.141
-6.657
54.000
4.202
AV
5512.700
101.222
96.913
N/A
N/A
4.310
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 222 of 356
Site: AC1
Time: 2017/08/22 - 04:27
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5672.900
114.538
109.779
N/A
N/A
4.759
PK
5725.000
59.282
54.253
-14.718
74.000
5.029
PK
5728.600
60.890
55.838
-13.110
74.000
5.052
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 223 of 356
Site: AC1
Time: 2017/08/22 - 04:30
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5676.550
101.511
96.738
N/A
N/A
4.772
AV
5725.000
46.944
41.915
-7.056
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 224 of 356
Site: AC1
Time: 2017/08/22 - 04:35
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5667.850
112.426
107.688
N/A
N/A
4.739
PK
5725.000
58.396
53.367
-15.604
74.000
5.029
PK
5727.400
61.024
55.980
-12.976
74.000
5.044
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 225 of 356
Site: AC1
Time: 2017/08/22 - 04:37
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11n-HT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5679.250
100.092
95.308
N/A
N/A
4.785
AV
5725.000
46.226
41.197
-7.774
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 226 of 356
Site: AC1
Time: 2017/08/22 - 05:10
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5324.640
114.579
110.722
N/A
N/A
3.857
PK
5350.000
57.844
53.939
-16.156
74.000
3.904
PK
5358.240
59.209
55.289
-14.791
74.000
3.919
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 227 of 356
Site: AC1
Time: 2017/08/22 - 05:12
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5324.840
102.271
98.413
N/A
N/A
3.857
AV
5350.000
44.864
40.959
-9.136
54.000
3.904
AV
5368.360
44.962
41.024
-9.038
54.000
3.938
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 228 of 356
Site: AC1
Time: 2017/08/22 - 05:14
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.680
113.747
109.893
N/A
N/A
3.854
PK
5350.000
56.732
52.827
-17.268
74.000
3.904
PK
5383.160
59.482
55.517
-14.518
74.000
3.965
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 229 of 356
Site: AC1
Time: 2017/08/22 - 05:15
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5320MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5322.320
101.190
97.337
N/A
N/A
3.853
AV
5350.000
45.610
41.705
-8.390
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 230 of 356
Site: AC1
Time: 2017/08/22 - 05:18
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5456.955
59.262
55.088
-14.738
74.000
4.173
PK
5460.000
57.408
53.228
-16.592
74.000
4.180
PK
5465.505
59.818
55.626
-14.182
74.000
4.193
PK
5470.000
57.477
53.275
-16.523
74.000
4.202
PK
5502.450
114.201
109.922
N/A
N/A
4.278
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 231 of 356
Site: AC1
Time: 2017/08/22 - 05:21
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
45.095
40.915
-8.905
54.000
4.180
AV
5470.000
45.467
41.265
-8.533
54.000
4.202
AV
5501.550
102.155
97.878
N/A
N/A
4.277
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 232 of 356
Site: AC1
Time: 2017/08/22 - 05:25
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5452.050
58.916
54.755
-15.084
74.000
4.161
PK
5460.000
57.524
53.344
-16.476
74.000
4.180
PK
5468.205
58.752
54.554
-15.248
74.000
4.198
PK
5470.000
57.248
53.046
-16.752
74.000
4.202
PK
5504.115
112.650
108.366
N/A
N/A
4.284
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 233 of 356
Site: AC1
Time: 2017/08/22 - 05:27
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5500MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
44.920
40.740
-9.080
54.000
4.180
AV
5470.000
45.376
41.174
-8.624
54.000
4.202
AV
5503.260
101.811
97.529
N/A
N/A
4.281
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 234 of 356
Site: AC1
Time: 2017/08/22 - 05:35
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5701.413
114.244
109.358
N/A
N/A
4.886
PK
5725.000
58.491
53.462
-15.509
74.000
5.029
PK
5725.300
60.112
55.081
-13.888
74.000
5.031
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 235 of 356
Site: AC1
Time: 2017/08/22 - 05:38
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5697.090
102.096
97.233
N/A
N/A
4.863
AV
5725.000
46.195
41.166
-7.805
54.000
5.029
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 236 of 356
Site: AC1
Time: 2017/08/22 - 05:40
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5698.228
112.719
107.850
N/A
N/A
4.869
PK
5725.000
57.921
52.892
-16.079
74.000
5.029
PK
5738.690
59.106
53.990
-14.894
74.000
5.116
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 237 of 356
Site: AC1
Time: 2017/08/22 - 05:41
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT20 at Channel 5700MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5696.700
100.934
96.073
N/A
N/A
4.860
AV
5725.000
45.791
40.762
-8.209
54.000
5.029
AV
5725.723
45.818
40.784
-8.182
54.000
5.033
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 238 of 356
Site: AC1
Time: 2017/08/22 - 06:24
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5300.700
114.979
111.166
N/A
N/A
3.812
PK
5350.000
61.155
57.250
-12.845
74.000
3.904
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 239 of 356
Site: AC1
Time: 2017/08/22 - 06:29
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5307.200
101.655
97.830
N/A
N/A
3.825
AV
5350.000
47.714
43.809
-6.286
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 240 of 356
Site: AC1
Time: 2017/08/22 - 06:30
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5312.550
112.312
108.477
N/A
N/A
3.834
PK
5350.000
58.967
55.062
-15.033
74.000
3.904
PK
5352.900
60.792
56.882
-13.208
74.000
3.911
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 241 of 356
Site: AC1
Time: 2017/08/22 - 06:32
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5310MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5312.800
100.620
96.785
N/A
N/A
3.835
AV
5350.000
47.991
44.086
-6.009
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 242 of 356
Site: AC1
Time: 2017/08/22 - 06:34
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
58.548
54.368
-15.452
74.000
4.180
PK
5462.700
61.206
57.020
-12.794
74.000
4.186
PK
5470.000
59.359
55.157
-14.641
74.000
4.202
PK
5517.900
114.994
110.669
N/A
N/A
4.324
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 243 of 356
Site: AC1
Time: 2017/08/22 - 06:37
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5458.550
46.698
42.521
-7.302
54.000
4.178
AV
5460.000
46.622
42.442
-7.378
54.000
4.180
AV
5470.000
47.585
43.383
-6.415
54.000
4.202
AV
5516.350
102.122
97.802
N/A
N/A
4.320
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 244 of 356
Site: AC1
Time: 2017/08/22 - 06:38
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5456.850
59.205
55.031
-14.795
74.000
4.173
PK
5460.000
57.554
53.374
-16.446
74.000
4.180
PK
5469.000
60.624
56.424
-13.376
74.000
4.200
PK
5470.000
58.316
54.114
-15.684
74.000
4.202
PK
5513.400
113.135
108.824
N/A
N/A
4.310
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 245 of 356
Site: AC1
Time: 2017/08/22 - 06:40
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5510MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5460.000
46.210
42.030
-7.790
54.000
4.180
AV
5468.900
47.373
43.173
-6.627
54.000
4.200
AV
5470.000
47.325
43.123
-6.675
54.000
4.202
AV
5512.650
101.481
97.172
N/A
N/A
4.309
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 246 of 356
Site: AC1
Time: 2017/08/22 - 06:42
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5674.850
114.363
109.596
N/A
N/A
4.767
PK
5725.000
59.247
54.218
-14.753
74.000
5.029
PK
5725.800
61.323
56.289
-12.677
74.000
5.033
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 247 of 356
Site: AC1
Time: 2017/08/22 - 06:44
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5677.050
101.407
96.632
N/A
N/A
4.775
AV
5725.000
46.758
41.729
-7.242
54.000
5.029
AV
5725.550
46.766
41.733
-7.234
54.000
5.032
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 248 of 356
Site: AC1
Time: 2017/08/22 - 06:46
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5680.950
112.170
107.379
N/A
N/A
4.791
PK
5725.000
58.581
53.552
-15.419
74.000
5.029
PK
5733.400
60.642
55.559
-13.358
74.000
5.083
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 249 of 356
Site: AC1
Time: 2017/08/22 - 06:48
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT40 at Channel 5670MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5667.650
99.816
95.078
N/A
N/A
4.737
AV
5725.000
46.191
41.162
-7.809
54.000
5.029
AV
5728.750
46.405
41.352
-7.595
54.000
5.053
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 250 of 356
Site: AC1
Time: 2017/08/22 - 07:30
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5290MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5293.130
113.822
110.004
N/A
N/A
3.818
PK
5350.000
61.439
57.534
-12.561
74.000
3.904
PK
5374.420
63.520
59.571
-10.480
74.000
3.949
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 251 of 356
Site: AC1
Time: 2017/08/22 - 07:33
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5290MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5277.290
98.837
95.008
N/A
N/A
3.829
AV
5350.000
49.187
45.282
-4.813
54.000
3.904
AV
5369.470
49.502
45.562
-4.498
54.000
3.940
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 252 of 356
Site: AC1
Time: 2017/08/22 - 07:37
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5290MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5313.260
110.668
106.832
N/A
N/A
3.836
PK
5350.000
60.571
56.666
-13.429
74.000
3.904
PK
5371.340
62.766
58.823
-11.234
74.000
3.943
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 253 of 356
Site: AC1
Time: 2017/08/22 - 07:42
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5290MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5291.920
96.909
93.090
N/A
N/A
3.819
AV
5350.000
49.221
45.316
-4.779
54.000
3.904
AV
5351.210
49.345
45.438
-4.655
54.000
3.907
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 254 of 356
Site: AC1
Time: 2017/08/22 - 07:43
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5530MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5456.030
65.896
61.724
-8.104
74.000
4.172
PK
5460.000
63.506
59.326
-10.494
74.000
4.180
PK
5468.450
64.886
60.687
-9.114
74.000
4.198
PK
5470.000
63.699
59.497
-10.301
74.000
4.202
PK
5532.390
112.704
108.335
N/A
N/A
4.368
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 255 of 356
Site: AC1
Time: 2017/08/22 - 07:45
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5530MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5454.765
51.578
47.409
-2.422
54.000
4.170
AV
5460.000
50.749
46.569
-3.251
54.000
4.180
AV
5469.255
51.008
46.807
-2.992
54.000
4.201
AV
5470.000
50.926
46.724
-3.074
54.000
4.202
AV
5532.510
98.989
94.620
N/A
N/A
4.369
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 256 of 356
Site: AC1
Time: 2017/08/22 - 07:52
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5530MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5454.190
65.732
61.564
-8.268
74.000
4.168
PK
5460.000
63.290
59.110
-10.710
74.000
4.180
PK
5469.140
65.955
61.755
-8.045
74.000
4.201
PK
5470.000
63.648
59.446
-10.352
74.000
4.202
PK
5534.460
110.750
106.375
N/A
N/A
4.374
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 257 of 356
Site: AC1
Time: 2017/08/22 - 07:53
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80 at Channel 5530MHz Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5454.420
52.104
47.936
-1.896
54.000
4.168
AV
5460.000
51.355
47.175
-2.645
54.000
4.180
AV
5469.140
52.023
47.823
-1.977
54.000
4.201
AV
5470.000
51.631
47.429
-2.369
54.000
4.202
AV
5534.810
97.762
93.386
N/A
N/A
4.376
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 258 of 356
Site: AC1
Time: 2017/09/06 - 04:52
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5290MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5286.530
108.264
104.442
N/A
N/A
3.821
PK
5350.000
65.000
61.095
-9.000
74.000
3.904
PK
5352.750
66.530
62.620
-7.470
74.000
3.910
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 259 of 356
Site: AC1
Time: 2017/09/06 - 04:51
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5290MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5268.270
95.709
91.873
N/A
N/A
3.836
AV
5350.000
50.800
46.895
-3.200
54.000
3.904
AV
5356.930
51.000
47.083
-3.000
54.000
3.917
AV
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 260 of 356
Site: AC1
Time: 2017/09/06 - 04:53
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5290MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5275.860
108.777
104.947
N/A
N/A
3.831
PK
5350.000
64.566
60.661
-9.434
74.000
3.904
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 261 of 356
Site: AC1
Time: 2017/09/06 - 04:53
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5290MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5272.780
96.312
92.479
N/A
N/A
3.833
AV
5350.000
49.447
45.542
-4.553
54.000
3.904
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 262 of 356
Site: AC1
Time: 2017/09/06 - 05:45
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5530MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5440.275
65.848
61.723
-8.152
74.000
4.126
PK
5460.000
64.210
60.030
-9.790
74.000
4.180
PK
5466.955
65.587
61.391
-8.413
74.000
4.196
PK
5470.000
62.909
58.707
-11.091
74.000
4.202
PK
5517.785
107.488
103.164
N/A
N/A
4.324
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 263 of 356
Site: AC1
Time: 2017/09/06 - 05:46
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5530MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
Type
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5460.000
51.948
47.768
-2.052
54.000
4.180
AV
5519.395
94.470
90.141
N/A
N/A
4.328
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 264 of 356
Site: AC1
Time: 2017/09/06 - 05:45
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5530MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5452.005
67.882
63.721
-6.118
74.000
4.161
PK
5460.000
66.592
62.412
-7.408
74.000
4.180
PK
5470.000
66.081
61.879
-7.919
74.000
4.202
PK
5539.175
108.170
103.781
N/A
N/A
4.389
PK
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 265 of 356
Site: AC1
Time: 2017/09/06 - 05:44
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Vertical
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5530MHz Ant 0 + 1 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Flag
Mark
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
Type
5456.490
53.568
49.395
-0.432
54.000
4.172
AV
5460.000
52.867
48.687
-1.133
54.000
4.180
AV
5538.025
95.391
91.005
N/A
N/A
4.386
AV
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 266 of 356
Site: AC1
Time: 2017/09/06 - 04:58
Limit: FCC_Part15.209_RE(3m)
Engineer: Kevin Ker
Probe: BBHA9120D_1GHz_18GHz
Polarity: Horizontal
EUT: ACCESS POINT
Power: POE (DC 57V)
Test Mode: Transmit by 802.11ac-VHT80+80 at Channel 5290MHz Ant 2 + 3 / Ant 0 + 1 + 2 + 3 (CDD Mode)
No
Frequency
Measure
Reading
Over Limit
Limit
Factor
(MHz)
Level
Level
(dB)
(dBuV/m)
(dB)
(dBuV/m)
(dBuV)
5272.450
109.044
105.211
N/A
N/A
3.833
PK
5350.000
66.067
62.162
-7.933
74.000
3.904
PK
5352.860
68.103
64.193
-5.897
74.000
3.911
PK
Flag
Mark
Type
Note: Measure Level (dBμV/m) = Reading Level (dBμV) + Factor (dB)
Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) - Pre_Amplifier Gain (dB)
FCC ID: Q9DAPEX037457
Page Number: 267 of 356
Download: APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Mirror Download [FCC.gov]APEX037457 ACCESS POINT Test Report _20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6 Hewlett Packard Enterprise Company
Document ID3736300
Application IDaubObjNzYl79srGsz5EbWg==
Document DescriptionTest Report_20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize459.97kB (5749678 bits)
Date Submitted2018-01-31 00:00:00
Date Available2018-03-08 00:00:00
Creation Date2018-01-20 16:08:54
Producing SoftwareFoxit PhantomPDF - Foxit Corporation
Document Lastmod2018-01-20 16:08:54
Document TitleTest Report_20180124_v2 - Annex E-APEX0375 UNII Test Data_Part6
Document Author: Kevin Guo

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 168
Producer                        : Foxit PhantomPDF - Foxit Corporation
Author                          : Kevin Guo
Create Date                     : 2018:01:20 16:08:54
Modify Date                     : 2018:01:20 16:08:54