X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED

SMT TELECOMM HK LIMITED Mobile Phone

Page 1 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 2 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 3 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 4 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 5 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 6 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 7 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 8 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 9 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 10 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 11 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 12 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 13 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 14 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 15 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 16 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 17 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 18 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 19 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 20 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 21 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 22 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 23 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Page 24 of X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED

Page 2 of 48
Report No.: 180709006RFC-2
Version
Version No.
Date
Description
V1.0
July 26, 2018
Original
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 3 of 48
Report No.: 180709006RFC-2
CONTENTS
1.
GENERAL INFORMATION ....................................................................................................................................... 4
1.1
1.2
CLIENT INFORMATION ........................................................................................................................................ 4
EUT INFORMATION ............................................................................................................................................ 4
1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4
1.2.2 DESCRIPTION OF ACCESSORIES.............................................................................................................. 4
1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5
1.4 OTHER INFORMATION ......................................................................................................................................... 5
1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5
1.6 TEST LOCATION ................................................................................................................................................. 6
1.7 TEST FACILITY ................................................................................................................................................... 6
1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 6
1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 6
1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6
1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7
2.
3.
4.
TEST SUMMARY ...................................................................................................................................................... 8
EQUIPMENT LIST .................................................................................................................................................... 9
TEST CONFIGURATION ........................................................................................................................................ 10
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.
ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 10
4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 10
TEST CHANNELS ............................................................................................................................................. 10
EUT TEST STATUS .......................................................................................................................................... 10
PRE-SCAN .................................................................................................................................................... 10
4.4.1 PRE-SCAN UNDER ALL PACKETS AT MIDDLE CHANNEL.............................................................................. 10
4.4.2 W ORST-CASE DATA PACKETS ................................................................................................................ 10
4.4.3 TESTED CHANNEL DETAIL...................................................................................................................... 11
TEST SETUP .................................................................................................................................................... 12
4.5.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 12
4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 13
4.5.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 14
SYSTEM TEST CONFIGURATION ........................................................................................................................ 14
DUTY CYCLE ................................................................................................................................................... 15
RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 16
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 16
ANTENNA REQUIREMENT ................................................................................................................................. 16
CONDUCTED PEAK OUTPUT POWER ................................................................................................................. 17
20 DB BANDWIDTH .......................................................................................................................................... 20
CARRIER FREQUENCIES SEPARATION ............................................................................................................... 23
NUMBER OF HOPPING CHANNEL ...................................................................................................................... 25
DWELL TIME .................................................................................................................................................... 29
CONDUCTED OUT OF BAND EMISSION .............................................................................................................. 33
RADIATED SPURIOUS EMISSIONS...................................................................................................................... 38
BAND EDGE MEASUREMENTS (RADIATED) ........................................................................................................ 42
CONDUCTED EMISSION .................................................................................................................................... 45
APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 48
APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 48
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 4 of 48
Report No.: 180709006RFC-2
1. GENERAL INFORMATION
1.1 CLIENT INFORMATION
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
SMT TELECOMM HK LIMITED
Unit C 8/F CHARMHILL CTR 50 HILLWOOD RD TST KL, Kowloon, Hong Kong
SMT TELECOMM HK LIMITED
Unit C 8/F CHARMHILL CTR 50 HILLWOOD RD TST KL, Kowloon, Hong Kong
1.2 EUT INFORMATION
1.2.1
General Description of EUT
Product Name:
Model No.:
Add. Model No.:
Trade Mark:
DUT Stage:
EUT Supports Function:
Software Version:
Hardware Version:
IMEI Code:
Sample Received Date:
Sample Tested Date:
1.2.2
Mobile Phone
CRUSH X565
N/A
N/A
Identical Prototype
GSM Bands:
UTRA Bands:
GSM850/1900
Band II/ Band IV/ Band V
IEEE 802.11b/g/n
2.4 GHz ISM Band:
Bluetooth V4.0
SMT_SN_X565_V2984_FINAL
W56A_V3
562740131923804, 269480271353401;
321447530691208, 320359601481274
July 10, 2018
July 10, 2018 to July 16, 2018
Description of Accessories
Adapter
Model No.:
Input:
Output:
AC Cable:
DC Cable:
PCX565
100-240 V~50/60 Hz 0.15 A
5.0 V
1000 mA
N/A
N/A
Battery
Model No.:
Battery Type:
BPX565
Lithium-ion Rechargeable Battery
Rated Voltage:
Rated Capacity:
3.8 Vdc
2000 mAh
Cable
Description:
Cable Type:
Length:
USB Micro-B Plug Cable
Shielded without ferrite
1.1 Meter
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 5 of 48
Report No.: 180709006RFC-2
1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD
Frequency Band:
Frequency Range:
Bluetooth Version:
Modulation Technique:
Type of Modulation:
Number of Channels:
2400 MHz to 2483.5 MHz
2402 MHz to 2480 MHz
Bluetooth BR+EDR
Frequency Hopping Spread Spectrum(FHSS)
GFSK, π/4DQPSK, 8DPSK
79
Channel Separation:
Hopping Channel Type:
Antenna Type:
Antenna Gain:
Maximum Peak Power:
Normal Test Voltage:
1 MHz
Adaptive Frequency Hopping Systems
PIFA Antenna
2.47 dBi
5.12 dBm
3.8 Vdc
Extreme Test Voltage:
Extreme Test
Temperature:
3.5 to 4.3Vdc
-30 °C to +50 °C
1.4 OTHER INFORMATION
Operation Frequency Each of Channel
f = 2402 + k MHz, k = 0,…,78
Note:
is the operating frequency (MHz);
is the operating channel.
Modulation
GFSK
π/4 DQPSK
8DPSK
Packet
Modulation Configure
Packet Type
Packet Size
1-DH1
1-DH3
1-DH5
2-DH1
2-DH3
2-DH5
11
15
20
26
30
27
183
339
54
367
679
3-DH1
3-DH3
3-DH5
24
27
31
83
552
1021
1.5 DESCRIPTION OF SUPPORT UNITS
The EUT has been tested with associated equipment below.
1) Support Equipment
Description
Manufacturer
Model No.
Notebook
2) Support Cable
Cable No.
Serial Number
Supplied by
Lenovo
E450
SL10G10780
UnionTrust
Description
Connector
Length
Supplied by
Antenna Cable
SMA
0.30 Meter
UnionTrust
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 6 of 48
Report No.: 180709006RFC-2
1.6 TEST LOCATION
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua
New District, Shenzhen, China 518109
Telephone: +86 (0) 755 2823 0888
Fax: +86 (0) 755 2823 0886
1.7 TEST FACILITY
The test facility is recognized, certified, or accredited by the following organizations:
CNAS-Lab Code: L9069
The measuring equipment utilized to perform the tests documented in this report has been calibrated once a
year or in accordance with the manufacturer's recommendations, and is traceable under the ISO/IEC/EN 17025
to international or national standards. Equipment has been calibrated by accredited calibration laboratories.
IC-Registration No.: 21600-1
The 3m Semi-anechoic chamber of Shenzhen UnionTrust Quality and Technology Co., Ltd. has been registered
by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.:
21600-1.
A2LA-Lab Certificate No.: 4312.01
Shenzhen UnionTrust Quality and Technology Co., Ltd. has been accredited by A2LA for technical competence
in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General
Requirements for the Competence of Testing and Calibration Laboratories and any additional program
requirements in the identified field of testing.
FCC Accredited Lab.
Designation Number: CN1194
Test Firm Registration Number: 259480
1.8 DEVIATION FROM STANDARDS
None.
1.9 ABNORMALITIES FROM STANDARD CONDITIONS
None.
1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER
None.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 7 of 48
Report No.: 180709006RFC-2
1.11 MEASUREMENT UNCERTAINTY
Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the
Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at
approximately the 95% confidence level using a coverage factor of k=2.
No.
Item
Measurement Uncertainty
Conducted emission 9KHz-150KHz
±3.8 dB
Conducted emission 150KHz-30MHz
Radiated emission 9KHz-30MHz
Radiated emission 30MHz-1GHz
Radiated emission 1GHz-18GHz
Radiated emission 18GHz-26GHz
Radiated emission 26GHz-40GHz
±3.4 dB
±4.9 dB
±4.7 dB
±5.1 dB
±5.2 dB
±5.2 dB
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 8 of 48
Report No.: 180709006RFC-2
2. TEST SUMMARY
Test Item
Antenna Requirement
AC Power Line
Conducted Emission
Conducted Peak
Output Power
20 dB Bandwidth
Carrier Frequencies
Separation
Number of Hopping
Channel
Dwell Time
Conducted Out of
Band Emission
Radiated Emissions
Band Edge
Measurement
FCC 47 CFR Part 15 Subpart C Test Cases
Test Requirement
Test Method
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.203/15.247 (c)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.207
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247 (b)(1)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247 (a)(1)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247 (a)(1)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247 (b)(1)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247 (a)(1)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.247(d)
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.205/15.209
FCC 47 CFR Part 15 Subpart C Section
ANSI C63.10-2013
15.205/15.209
Result
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Page 9 of 48
Report No.: 180709006RFC-2
3. EQUIPMENT LIST
Used
Equipment
3M Chamber &
Accessory Equipment
Receiver
Used
Cal. date
(mm dd, yyyy)
Cal. Due date
(mm dd, yyyy)
ETS-LINDGREN
3M
N/A
Dec. 20, 2015
Dec. 19, 2018
R&S
ESIB26
100114
Dec. 10, 2017
Dec. 10, 2018
Loop Antenna
ETS-LINDGREN
6502
00202525
Dec. 22, 2017
Dec. 22, 2018
Broadband Antenna
ETS-LINDGREN
3142E
00201566
Dec. 17, 2017
Dec. 17, 2018
Preamplifier
Horn Antenna
(Pre-amplifier)
Horn Antenna
(Pre-amplifier)
Multi device
Controller
Band Rejection Filter
(2400MHz~2500MHz)
Test Software
HP
8447F
2805A02960
Dec. 10, 2017
Dec. 10, 2018
ETS-LINDGREN
3117-PA
00201874
May 22, 2018
May 22, 2019
ETS-LINDGREN
3116C-PA
00202652
Dec. 17, 2017
Dec. 17, 2018
ETS-LINDGREN
7006-001
00160105
N/A
N/A
Micro-Tronics
BRM50702
G248
June 06, 2018
June 06, 2019
Audix
e3
Equipment
Receiver
Pulse Limiter
Used
Radiated Emission Test Equipment List
Serial
Manufacturer
Model No.
Number
Conducted Emission Test Equipment List
Serial
Manufacturer
Model No.
Number
1316.3003K07
R&S
ESR7
-101181-K3
R&S
ESH3-Z2
0357.8810.54
LISN
R&S
ESH2-Z5
Test Software
Audix
e3
Equipment
EXA Spectrum
Analyzer
Wideband Radio
Communication
Tester
Software Version: 9.160323
860014/024
Cal. date
(mm dd, yyyy)
Cal. Due date
(mm dd, yyyy)
Dec. 10, 2017
Dec. 10, 2018
Dec. 10, 2017
Dec. 10, 2018
Dec. 10, 2017
Dec. 10, 2018
Software Version: 9.160323
Conducted RF test Equipment List
Serial
Manufacturer
Model No.
Number
Cal. date
(mm dd, yyyy)
Cal. Due date
(mm dd, yyyy)
KEYSIGHT
N9010A
MY51440197
Dec.10, 2017
Dec. 10, 2018
R&S
CMW500
1201.002k50104945-zQ
Mar. 05, 2018
Mar. 04, 2019
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 10 of 48
Report No.: 180709006RFC-2
4. TEST CONFIGURATION
4.1 ENVIRONMENTAL CONDITIONS FOR TESTING
4.1.1
Normal or Extreme Test Conditions
Environment Parameter
Test Condition
Temperature (°C)
NT/NV
Selected Values During Tests
Ambient
Voltage (V)
Relative Humidity (%)
+15 to +35
3.8
20 to 75
Remark:
1) NV: Normal Voltage; NT: Normal Temperature
4.2 TEST CHANNELS
Mode
Tx/Rx Frequency
GFSK
(DH1, DH3, DH5)
2402 MHz to 2480 MHz
π/4DQPSK
(DH1, DH3, DH5)
2402 MHz to 2480 MHz
8DPSK
(DH1, DH3, DH5)
2402 MHz to 2480 MHz
Lowest(L)
Test RF Channel Lists
Middle(M)
Highest(H)
Channel 0
2402 MHz
Channel 0
Channel 39
2441 MHz
Channel 39
Channel 78
2480 MHz
Channel 78
2402 MHz
Channel 0
2402 MHz
2441 MHz
Channel 39
2441 MHz
2480 MHz
Channel 78
2480 MHz
4.3 EUT TEST STATUS
Type of Modulation
Tx Function
1.
GFSK/π/4DQPSK/
8DPSK
1Tx
2.
Description
Keep the EUT in continuously transmitting with Modulation
test single
Keep the EUT in continuously transmitting with Modulation
test Hopping Frequency.
Power Setting
Power Setting: not applicable, test used software default power level.
Test Software
EngineerMode
4.4 PRE-SCAN
4.4.1
Pre-scan under all packets at middle channel
Conducted Average Power (dBm) for packets
Type of Modulation
Packets
Power (dBm)
4.4.2
π/4DQPSK
GFSK
1-DH1
-0.58
1-DH3
2.72
1-DH5
3.37
2-DH1
-2.52
2-DH3
0.29
8DPSK
2-DH5
0.96
3-DH1
-2.52
3-DH3
0.27
Worst-case data packets
Type of Modulation
GFSK
π/4DQPSK
8DPSK
Worst-case data rates
1-DH5
2-DH5
3-DH5
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
3-DH5
0.91
Page 11 of 48
4.4.3
Report No.: 180709006RFC-2
Tested channel detail
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between
available modulations, data packets and antenna ports (if EUT with antenna diversity architecture). Following
channel(s) was (were) selected for the final test as listed below.
Type of Modulation
GFSK
π/4DQPSK
8DPSK
111222333Data Packets
DH1
DH3
DH5
DH1
DH3
DH5
DH1
DH3
DH5
Available Channel
0 to 78
Test Item
Test channel and choose of data packets
AC Power Line Conducted
Emission
Frequency Hopping Channel 0 to 78
Link
Channel 0 & 39 & 78
Conducted Peak Output
Power
Channel 0 & 39 & 78
20 dB Bandwidth
Carrier Frequencies
Separation
Number of Hopping Channel
Frequency Hopping Channel 0 to 78
Frequency Hopping Channel 0 to 78
Dwell Time
Conducted Out of Band
Emission
Radiated Emissions
Band Edge Measurements
(Radiated)
Channel 39
Channel 0 & 39 & 78
Channel 0 & 39 & 78
Channel 0 & 78
Remark:
1. The mark “ ” means is chosen for testing;
2. The mark “ ” means is not chosen for testing.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 12 of 48
Report No.: 180709006RFC-2
4.5 TEST SETUP
4.5.1
For Radiated Emissions test setup
Figure 1. Below 30MHz
Figure 2. 30MHz to 1GHz
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 13 of 48
Report No.: 180709006RFC-2
Figure 3. Above 1GHz
4.5.2
For Conducted Emissions test setup
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 14 of 48
4.5.3
Report No.: 180709006RFC-2
For Conducted RF test setup
4.6 SYSTEM TEST CONFIGURATION
For emissions testing, the equipment under test (EUT) setup to transmit continuously to simplify the
measurement methodology. Care was taken to ensure proper power supply voltages during testing. During
testing, radiated emission were performed with the EUT set to transmit at the channel with highest output power
as worst-case scenario. It was powered by a 3.8Vdc rechargeable Li-on battery. Only the worst case data were
recorded in this test report.
The signal is maximized through rotation and placement in the three orthogonal axes. The antenna height and
polarization are varied during the search for maximum signal level. The antenna height is varied from 1 to 4
meters. Radiated emissions are taken at three meters unless the signal level is too low for measurement at that
distance. If necessary, a pre-amplifier is used and/or the test is conducted at a closer distance. Therefore, all
final radiated testing was performed with the EUT in orientation.
All readings are extrapolated back to the equivalent three meter reading using inverse scaling with distance.
Analyzer resolution is 100 kHz or greater for frequencies below 1000 MHz. The resolution is 1 MHz or greater
for frequencies above 1000 MHz. The spurious emissions more than 20 dB below the permissible value are not
reported.
Radiated emission measurement were performed from the lowest radio frequency signal generated in the
device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or to 40 GHz,
whichever is lower.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 15 of 48
Report No.: 180709006RFC-2
4.7 DUTY CYCLE
Type of
Modulation
Packets
On Time
(msec)
Period
(msec)
GFSK
1-DH5
2.895
3.75
Duty Cycle Duty Cycle Duty Cycle
(linear)
(%)
Factor (dB)
0.77
77.20
1.12
1/ T
Average
Minimum
Factor (dB)
VBW (kHz)
0.35
Remark:
1) Duty cycle= On Time/ Period;
2) Duty Cycle factor = 10 * log(1/ Duty cycle);
3) Average factor = 20 log10 Duty Cycle.
The test plot as follows
GFSK_ 1-DH5
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
-2.25
Page 16 of 48
Report No.: 180709006RFC-2
5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION
5.1 REFERENCE DOCUMENTS FOR TESTING
No.
Identity
FCC 47 CFR Part 2
FCC 47 CFR Part 15
ANSI C63.10-2013
Document Title
Frequency allocations and radio treaty matters; general rules and
regulations
Radio Frequency Devices
American National Standard for Testing Unlicesed Wireless
Devices
5.2 ANTENNA REQUIREMENT
Standard Requirement
15.203 requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna
that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so that a broken
antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is
prohibited.
15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas
with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if
transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the
intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this
section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi.
EUT Antenna:
Antenna in the interior of the equipment and no consideration of replacement. The gain of the antenna is
2.47 dBi.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 17 of 48
Report No.: 180709006RFC-2
5.3 CONDUCTED PEAK OUTPUT POWER
Test Requirement:
Test Method:
Limit:
Test Procedure:
FCC 47 CFR Part 15 Subpart C Section15.247 (b)(1)
ANSI C63.10-2013 Section 7.8.5
For frequency hopping systems operating in the 2400-2483.5 MHz band employing at
least 75 non-overlapping hopping channels, and all frequency hopping systems in the
5725-5850 MHz band: 1 watt.
Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may
have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of
the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems
operate with an output power no greater than 125 mW.
Remove the antenna from the EUT and then connect a low loss RF cable from the
antenna port to the spectrum analyzer.
a)
Use the following spectrum analyzer settings:
1) Span: Approximately 5 x 20 dB bandwidth, centered on a hopping channel.
2) RBW > 20 dB bandwidth of the emission being measured.
3) VBW ≥ RBW.
4) Sweep: Auto.
5) Detector function: Peak.
6) Trace: Max hold.
b)
c)
d)
Test Setup:
Instruments Used:
Test Mode:
Test Results:
Test Data:
Allow trace to stabilize.
Use the marker-to-peak function to set the marker to the peak of the emission.
The indicated level is the peak output power, after any corrections for external
attenuators and cables.
e) A plot of the test results and setup description shall be included in the test report.
Refer to section 4.5.3 for details.
Refer to section 3 for details
Transmitter mode
Pass
Peak Output Power (dBm)
Peak Output Power (mW)
Type of
Modulation
Channel 0
Channel 39
Channel 78
Channel 0
Channel 39
Channel 78
GFSK
5.12
5.00
4.53
3.25
3.16
2.84
π/4 DQPSK
4.93
4.80
4.34
3.11
3.02
2.71
8DPSK
5.08
4.98
4.54
3.22
3.15
2.84
Note: The antenna gain of 2.47 dBi less than 6dBi maximum permission antenna gain value based on 1 watt
peak output power limit.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 18 of 48
Report No.: 180709006RFC-2
The test plot as follows:
π/4 DQPSK
GFSK
Lowest Channel
Middle Channel
Highest Channel
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 19 of 48
Report No.: 180709006RFC-2
8DPSK
Lowest Channel
Middle Channel
Highest Channel
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 20 of 48
Report No.: 180709006RFC-2
5.4 20 DB BANDWIDTH
Test Requirement:
Test Method:
Limit:
Test Procedure:
FCC 47 CFR Part 15 Subpart C Section 15.247 (a)(1)
ANSI C63.10-2013 Section 6.9.2
None; for reporting purposes only.
Remove the antenna from the EUT and then connect a low loss RF cable from the
antenna port to the spectrum analyzer.
Use the following spectrum analyzer settings:
a)
b)
c)
d)
e)
f)
g)
Test Setup:
Instruments Used:
Test Mode:
Test Results:
Test Data:
Type of
Modulation
Span = approximately 2 to 5 times the OBW, centered on a hopping channel.
RBW = 1% to 5% of the OBW.
VBW ≥ 3 x RBW
Sweep = auto;
Detector function = peak
Trace = max hold
All the trace to stabilize, use the marker-to-peak function to set the marker to the
peak of the emission, use the marker-delta function to measure and record the
20dB down bandwidth of the emission.
Note: The cable loss and attenuator loss were offset into measure device as an
amplitude offset.
Refer to section 4.5.3 for details.
Refer to section 3 for details
Transmitter mode
Pass
20 dB Bandwidth (MHz)
Channel 0
Channel 39
Channel 78
99% Bandwidth (MHz)
Channel 0
Channel 39
Channel 78
GFSK
1.033
0.968
0.972
0.8907
0.8857
0.8905
π/4 DQPSK
8DPSK
1.289
1.288
1.287
1.289
1.287
1.288
1.1679
1.1732
1.1669
1.1713
1.1661
1.1699
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 21 of 48
Report No.: 180709006RFC-2
The test plot as follows:
π/4 DQPSK
GFSK
Lowest Channel
Middle Channel
Highest Channel
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 22 of 48
Report No.: 180709006RFC-2
8DPSK
Lowest Channel
Middle Channel
Highest Channel
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 23 of 48
Report No.: 180709006RFC-2
5.5 CARRIER FREQUENCIES SEPARATION
Test Requirement:
Test Method:
Limit:
Test Procedure:
FCC 47 CFR Part 15 Subpart C Section 15.247 (a)(1)
ANSI C63.10-2013 Section 7.8.2
Frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping
channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB
bandwidth of the hopping channel, whichever is greater.
Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may
have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of
the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems
operate with an output power no greater than 125 mW.
Remove the antenna from the EUT and then connect a low loss RF cable from the
antenna port to the spectrum analyzer.
Use the following spectrum analyzer settings:
a)
b)
c)
d)
e)
f)
g)
h)
Test Setup:
Instruments Used:
Test Mode:
Test Results:
Test Data:
Span: Wide enough to capture the peaks of two adjacent channels.
RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust
as necessary to best identify the center of each individual channel.
Video (or average) bandwidth (VBW) ≥ RBW.
Sweep: Auto.
Detector function: Peak.
Trace: Max hold.
Allow the trace to stabilize.
Use the marker-delta function to determine the separation between the peaks of
the adjacent channels.
Note: The cable loss and attenuator loss were offset into measure device as an
amplitude offset.
Refer to section 4.5.3 for details.
Refer to section 3 for details
Hopping Frequencies Transmitter mode
Pass
Type of Modulation
Adjacent Channel Separation (MHz)
Channel 39
Minimum Limit (MHz)
Channel 39
GFSK
π/4 DQPSK
8DPSK
1.000
1.000
1.000
0.645
0.858
0.859
Note: The minimum limit is two-third 20 dB bandwidth.
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Page 24 of 48
Report No.: 180709006RFC-2
The test plot as follows:
GFSK
π/4 DQPSK
8DPSK
Shenzhen UnionTrust Quality and Technology Co., Ltd.
Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China
Tel: +86-755-28230888
Fax: +86-755-28230886
E-mail: info@uttlab.com
Http://www.uttlab.com
Download: X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Mirror Download [FCC.gov]X565 Mobile Phone Test Report FCC_Part_15.247EDR_Report_Part_1_Rev.1 SMT TELECOMM HK LIMITED
Document ID3952448
Application ID4gTtMk22g4y7UnPPJoAvbA==
Document DescriptionFCC_Part_15.247EDR_Report_Part_1_Rev.1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize256.59kB (3207346 bits)
Date Submitted2018-08-06 00:00:00
Date Available2018-08-06 00:00:00
Creation Date2018-08-03 16:44:35
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2018-08-03 16:45:22
Document TitleFCC_Part_15.247EDR_Report_Part_1_Rev.1
Document CreatorMicrosoft® Word 2013
Document Author: kevin.liang

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : kevin.liang
Create Date                     : 2018:08:03 16:44:35+08:00
Modify Date                     : 2018:08:03 16:45:22+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:08:03 16:45:22+08:00
Creator Tool                    : Microsoft® Word 2013
Format                          : application/pdf
Creator                         : kevin.liang
Document ID                     : uuid:0551a83c-974b-4478-9a8c-15a34228dfaa
Instance ID                     : uuid:6e311a92-b77e-49b3-9413-2cf3cc60654d
Producer                        : Microsoft® Word 2013
Page Count                      : 24