SMG975U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report 1 Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Alternate Views: PDF [Zoom] Download [PDF]

                                        PCTEST ENGINEERING LABORATORY, INC.
                                                        7185 Oakland Mills Road, Columbia, MD 21046 USA
                                                              Tel. 410.290.6652 / Fax 410.290.6654
                                                                      http://www.pctest.com

                                                               MEASUREMENT REPORT
                                                 FCC Part 15B Receiver Spurious Emissions

  Applicant Name:                                                                                Date of Testing:
  Samsung Electronics Co., Ltd.                                                                  10/31/2018-12/26/2018
  129, Samsung-ro,                                                                               Test Site/Location:
  Yeongtong-gu, Suwon-si                                                                         PCTEST Lab. Columbia, MD, USA
  Gyeonggi-do, 16677, Korea                                                                      Test Report Serial No.:
                                                                                                 1M1810250197-13.A3L


  FCC ID:                                                            A3LSMG975U
  APPLICANT:                                                         Samsung Electronics Co., Ltd.

  Application Type:                                                  Certification
  Model:                                                             SM-G975U
  Additional Model(s):                                               SM-G975U1, SM-G975W, SM-G975XU
  EUT Type:                                                          Portable Handset
  FCC Rule Part(s):                                                  FCC Part 15 Subpart B
  Test Procedure(s):                                                 ANSI C63.4-2014



  This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report
  and has been tested in accordance with the measurement procedures specified in ANSI C63.4-2014 (See Test Report). The results shown
  herein are also deemed satisfactory evidence of compliance with RSS-Gen. These measurements were performed with no deviation from
  the standards. Test results reported herein relate only to the item(s) tested.

  I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
  correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the
  qualifications of all persons taking them.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 1 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


                                               T A B L E                       O F             C O N T E N T S

        1.0         Introduction ...................................................................................................................................... 3
                    1.1      Scope..................................................................................................................................................... 3
                    1.2      PCTEST Test Location .......................................................................................................................... 3
                    1.3      Test Facility / Accreditations .................................................................................................................. 3
        2.0         PRODUCT INFORMATION ............................................................................................................. 4
                    2.1      Equipment Description ........................................................................................................................... 4
                    2.2      Device Capabilities ................................................................................................................................ 4
                    2.3      Test Configuration ................................................................................................................................. 4
                    2.4      EMI Suppression Device(s)/Modifications.............................................................................................. 4
        3.0         DESCRIPTION OF TESTS .............................................................................................................. 5
                    3.1      Evaluation Procedure ............................................................................................................................ 5
                    3.2      Radiated Emissions ............................................................................................................................... 5
                    3.3      Environmental Conditions ...................................................................................................................... 5
        4.0         SAMPLE CALCULATIONS .............................................................................................................. 6
                    4.1      Radiated Emission Measurement Sample Calculation .......................................................................... 6
        5.0         Measurement Uncertainty ................................................................................................................ 7
        6.0         TEST EQUIPMENT CALIBRATION DATA ...................................................................................... 8
        7.0         TEST DATA ..................................................................................................................................... 9
                    7.1      Summary ............................................................................................................................................... 9
                    7.2      Radiated Measurement Data ............................................................................................................... 10
        8.0         CONCLUSION ............................................................................................................................... 13




                                                                                MEASUREMENT REPORT                                                                Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                                Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                  Page 2 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


1.0              INTRODUCTION

1.1           Scope
Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including
intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal
Communications Commission and Innovation, Science and Economic Development Canada.

1.2           PCTEST Test Location
These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 7185
Oakland Mills Road, Columbia, MD 21046. The measurement facility is compliant with the test site requirements
specified in ANSI C63.4-2014.

1.3           Test Facility / Accreditations
Measurements were performed at PCTEST Engineering Lab located in Columbia, MD 21046, U.S.A.

     PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory
      Accreditation (A2LA) with Certificate number 2041.01 for Specific Absorption Rate (SAR), Hearing Aid
      Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and
      Innovation, Science, and Economic Development Canada rules.

     PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
      (Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS).

     PCTEST facility is a registered (2451B) test laboratory with the site description on file with ISED.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 3 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


2.0              PRODUCT INFORMATION


2.1           Equipment Description
The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMG975U. The test data
contained in this report pertains only to the emissions due to receiver circuitry of the licensed transmitter of the
EUT.

Test Device Serial No.: 0505M, 0753M

2.2           Device Capabilities
This device contains the following capabilities:

800/850/1900 CDMA/EvDO Rev0/A, 1x Advanced (BC0, BC1, BC10), 850/1900 GSM/GPRS/EDGE,
850/1700/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n/ax WLAN, 802.11a/n/ac/ax UNII, Bluetooth (1x,
EDR, LE), NFC, ANT+, Wireless Power Transfer

The device contains receivers which tune and operate between 30MHz – 960MHz in the following bands:

CDMA850, GSM850, WCDMA850, LTE B71, LTE B12, LTE B13, LTE B14, LTE B26, LTE B5

2.3           Test Configuration
The EUT was tested while operating in licensed band Rx mode. All licensed band receivers that tune in the range
of 30MHz – 960MHz, as listed in Section 2.2, are investigated. Only the worst case emissions are reported.

All equipment is placed on the test table top and arranged in a typical configuration in accordance with ANSI
C63.4-2014 and manipulated to obtain worst case emissions.

For more information please see Section 7.0 for test data and the test setup photos document for the test setup
photographs.

2.4           EMI Suppression Device(s)/Modifications
No EMI suppression device(s) were added and no modifications were made during testing.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 4 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


3.0              DESCRIPTION OF TESTS

3.1           Evaluation Procedure
The measurement procedure described in the American National Standard for Methods of Measurement of
Radio-Noise Emission from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz
(ANSI C63.4-2014) was used in the measurement of the EUT.

Deviation from measurement procedure…………………………………………….....................................None

3.2           Radiated Emissions
The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements
and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic
chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m
elliptical, obstruction-free area in accordance with Clause 5, Figure 5.7 of ANSI C63.4-2014. A raised turntable is
used for radiated measurement. It is a continuously rotatable, remote-controlled, metallic turntable and 2 meters
(6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as
a ground plane. Absorbers are arranged on the floor between the turn table and the antenna mast in such a way
so as to maximize the reduction of reflections for measurements above 1GHz. . An 80cm tall test table made of
Styrodur is placed on top of the turn table. For measurements above 1GHz, an additional Styrodur pedestal is
placed on top of the test table to bring the total table height to 1.5m.

For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive
antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33(b)(1)
depending on the highest frequency generated or used in the device or on which the device operates or tunes.
For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below
30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were
performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband
amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions.
Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to
their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support
equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate
precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system
configuration, mode of operation, turntable azimuth, and receive antenna height was noted for each frequency
found.

Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and
horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum
analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances
with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the
height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the
maximum emission. Each emission was maximized by changing the orientation of the EUT through three
orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case
emissions.

All radiated measurements are performed in a chamber that meets the site requirements per ANSI C63.4-2014.

3.3           Environmental Conditions
The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar).

                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 5 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


4.0              SAMPLE CALCULATIONS


4.1           Radiated Emission Measurement Sample Calculation
              @ 66.7 MHz
                           Class B limit                                         = 100 V/m = 40.0 dBV/m
                           Reading                                               = - 76.0 dBm (calibrated level)
                           Convert to dBV                                       = - 76.0 + 107 = 31.0 dBV
                           Antenna Factor + Cable Loss                           = 5.8 dB/m
                                                                   Total         = 36.8 dBV/m


                           Margin                                                = 36.8 - 40.0 = - 3.2 dB
                                                                                 = 3.2 dB below limit




                  Note:


                     Level [dBV] = 20 log 10 (Level [V/m])
                       Level [dBV] = Level [dBm] + 107




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 6 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


5.0              MEASUREMENT UNCERTAINTY

The measurement uncertainties shown below were calculated in accordance with the requirements of
ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a
95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement
uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine
compliance.


                                                  Contribution                                        Expanded Uncertainty (±dB)

                                    Radiated Disturbance (<1GHz)                                                            4.98

                                    Radiated Disturbance (>1GHz)                                                            5.07




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 7 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


 6.0              TEST EQUIPMENT CALIBRATION DATA

Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
2017.

  Manufacturer                  Model                                Description                               Cal Date         Cal Interval         Cal Due         Serial Number
   COM‐Power                   AL‐130R                        Active Loop Antenna                             8/10/2018            Annual           8/10/2019              121085
   Com‐Power                   PAM‐103                     Pre‐Amplifier (1‐1000MHz)                          9/17/2018            Annual           9/17/2019              441119
      Emco                       3115                        Horn Antenna (1‐18GHz)                           3/28/2018            Biennial         3/28/2020            9704‐5182
 Rohde & Schwarz               CMW500                     Radio Communication Tester                          6/8/2018             Annual           6/8/2019               112347
 Rohde & Schwarz                ESU26                     EMI Test Receiver (26.5GHz)                         5/21/2018            Annual           5/21/2019              100342
 Rohde & Schwarz              SFUNIT‐Rx                        Shielded Filter Unit                           6/18/2018            Annual           6/18/2019              102134
      Sunol                      JB5                      Bi‐Log Antenna (30M ‐ 5GHz)                         4/19/2018            Biennial         4/19/2020             A051107
                                            Table 6-1. Annual Test Equipment Calibration Schedule




                                                                                 MEASUREMENT REPORT                                                              Approved by:
  FCC ID: A3LSMG975U
                                                                                    (CERTIFICATION)                                                              Quality Manager
  Test Report S/N:                      Test Dates:                    EUT Type:
                                                                                                                                                                 Page 8 of 13
  1M1810250197-13.A3L                   10/31/2018-12/26/2018          Portable Handset
 © 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.0              TEST DATA

7.1           Summary


                                   Test Date(s):                               10/31/2018-12/26/2018

                                   Test Engineer:                              Wilson, Rebecca




                         FCC Part 15 Section                                        Description                                             Result


                                      15.109                                  Radiated Emissions                                            PASS

                                                               Table 7-1. Summary of Test Results




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 9 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.2           Radiated Measurement Data
§15.109; ICES-003 (6.2)


Test Overview and Limit

All out of band radiated spurious emissions are measured with a spectrum analyzer connected to a receive
antenna while the EUT is operating at maximum power and at the appropriate frequencies. Only the radiated
emissions of the configuration that produced the worst case emissions are reported in this section.

All out of band emissions appearing in a restricted band as specified in Section 15.105 of the Title 47 CFR
must not exceed the limits shown in Table 7-2 per Section 15.109.

                                                 Frequency                       Field Strength Limit
                                                    [MHz]                               [V/m]
                                                   30 – 88                                100
                                                  88 – 216                                150
                                                 216 – 960                                200
                                                    > 960                                 500
                                                 Table 7-2. 3-Meter Radiated Limits (Section 15.109)

Test Procedures Used

ANSI C63.4-2014



Test Settings
             Field Strength Measurements
                    1. Analyzer frequency set to the frequency of the radiated spurious emission of interest
                    2. RBW = 100kHz, VBW = 300kHz (for emissions between 30MHz – 1GHz)
                    3. RBW = 1MHz, VBW = 3MHz (for emissions above 1GHz)
                    4. Detector = Quasi-peak (for emissions between 30MHz – 1GHz)
                    5. Detector = Peak (for emissions above 1GHz)
                    6. Sweep time = auto couple
                    7. Trace mode = max hold
                    8. Trace was allowed to stabilize


Test Setup
The EUT and measurement equipment were set up as shown test setup photos provided.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 10 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Test Notes

1.           All modes of operation were investigated and the worst-case emissions are reported.
2.           Radiated emissions were measured from 30MHz – 5GHz to ensure that the provisions of 15.33(b)(1) are
             satisfied with respect to the upper frequency scanning range.
3.           The radiated limits for unintentional radiators at a distance of 3 meters are used in the table above, as
             specified in 15.109(a).
4.            All readings are calibrated by a signal generator with accuracy traceable to the National Institute of
              Standards and Technology (NIST).
5.           AFCL (dB/m) = Antenna Factor (dB/m) + Cable Loss (dB)
6.           Level (dBV/m) = Analyzer Reading (dBm) + AFCL (dB/m) + 107
7.           Margin (dB) = Field strength (dBV/m) – Limit (dBV/m)
8.            Measurements are made using a CISPR quasi-peak detector with a 120kHz resolution bandwidth. Above
              1GHz, peak measurements are made using a peak detector with a resolution bandwidth of 1MHz and a
              video bandwidth of 3MHz and average measurements are made with a RMS detector using a resolution
              bandwidth of 1MHz and a video bandwidth of 3MHz.
9.            Calibrated linearly polarized broadband and horn antennas were used for measurements below and
              above 1GHz, respectively. For measurements made below 1GHz, the results recorded using the
              broadband antenna are known to correlate with the results obtained by using a tuned dipole with an
              acceptable degree of accuracy. The VSWR for the measurement antennas was found to be less than 2:1.
10.           Calibrated low-loss microwaves cables and broadband amplifiers are used.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 11 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


                                                       Plot 7-1. Radiated Spurious Plot below 1GHz




                                                       Plot 7-2. Radiated Spurious Plot above 1GHz


                                                Ant.        Antenna Turntable Analyzer                                                 Field
   Frequency                                                                                                           AFCL                      Limit  Margin
                          Detector              Pol.         Height  Azimuth   Level                                                  Strength
     [MHz]                                                                                                            [dB/m]                   [dBμV/m]  [dB]
                                               [H/V]          [cm]  [degree]   [dBm]                                                 [dBμV/m]
        40.66           Quasi-Peak                V             100                 180             -77.49             -15.70            13.81             40.00             -26.19

        89.07           Quasi-Peak                H             100                 196             -71.68             -19.08            16.24             43.52             -27.28

       105.50           Quasi-Peak                H             132                 330             -71.61             -18.43            16.96             43.52             -26.56

       177.78           Quasi-Peak                H             250                 288             -74.91             -18.85            13.24             43.52             -30.28

       347.92           Quasi-Peak                H             250                 352             -78.49             -15.51            13.00             46.02             -33.02

       502.65           Quasi-Peak                V             100                 109             -79.56             -11.95            15.49             46.02             -30.53
                                                      Table 7-3. Radiated Measurements at 3-meters



                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 12 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


8.0              CONCLUSION

The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
FCC ID: A3LSMG975U has been tested to comply with the requirements specified in §15.109 of the FCC rules
and RSS-Gen of the Innovation, Science, and Economic Development Canada rules.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG975U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 13 of 13
1M1810250197-13.A3L                    10/31/2018-12/26/2018          Portable Handset
© 2019 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.



Document Created: 2019-03-23 02:10:48
Document Modified: 2019-03-23 02:10:48
Download: SMG975U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report 1 Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMG975U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report 1 Samsung Electronics Co Ltd
Document ID4145340
Application IDpoWTU0YjtXFWLFzKZLaCzQ==
Document DescriptionTest Report 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize68.52kB (856489 bits)
Date Submitted2019-01-25 00:00:00
Date Available2019-02-01 00:00:00
Creation Date2019-01-09 12:53:02
Producing SoftwareAcrobat Distiller 19.0 (Windows)
Document Lastmod2019-01-25 18:36:52
Document TitleTest Report 1
Document CreatorPScript5.dll Version 5.2.2